IKEA VINDSTYRKA Smart Air Quality Monitor Appears with Integrated Instruction Manual
- June 9, 2024
- Ikea
Table of Contents
IKEA VINDSTYRKA Smart Air Quality Monitor Appears with Integrated
Instruction Manual
Instructions for use
Freestanding or paired
VINDSTYRKA air quality sensor can be used freestanding, but also be connected
to STARKVIND air purifiers and/or DIRIGERA hub for smart products.
Connect VINDSTYRKA to STARKVIND air purifier
Long press the pairing buttons on VINDSTYRKA and STARKVIND at the same time to
connect them. See pages 6-7. When the connection is successful, the pairing
icon should stop blinking on the display.
Recommended power supply:
5.0 VDC, 1.0 A (Not included)
Connect VINDSTYRKA to DIRIGERA
hub
By connecting VINDSTYRKA to DIRIGERA hub, you’ll be able to see the room’s air
quality in the IKEA Home smart app.
If you have an iOS device:
Go to the App Store and download the IKEA Home smart app. The app will show
you how to connect VINDSTYRKA to DIRIGERA hub.
If you have an Android device:
Go to Google Play and download the IKEA Home smart app. The app will show you
how to connect VINDSTYRKA to DIRIGERA hub.
Pairing: Connecting VINDSTYRKA air quality sensor to DIRIGERA hub and STARKVIND air purifier
- When the pairing mode is activated, the pairing icon **** on the display should blink until VINDSTYRKA is connected to the air purifier or the hub.
- When VINDSTYRKA is connected to 1 air purifier, the following icon should be active on the display.
- When VINDSTYRKA is connected to more than 1 air purifier, the following icon should be active on the display.
- When VINDSTYRKA is connected to DIRIGERA hub, only the pairing icon should be visible on the screen.
Display on VINDSTYRKA
Shows connected air purifiers.
Displays level of PM2.5 particles. PM2.5 are small inhalable particles, particles with a max. size of 2.5 micrometres. Green: 0-35 µg/m3, Yellow: 35-120 µg/m3, Red: >120 µg/m3.
Room temperature
Room relative humidity
Temperature and humidity can affect the indoor comfort and wellbeing
Indicates increasing, stable or decreasing level of TVOC.
TVOC stands for “Total Volatile Organic Compounds” (VOC).
Settings mode
A long press on the mode button will enter the Settings mode.
Brightness
A flashing symbol means that it is possible to adjust the brightness level.
Press the mode button to select between level 1, 2, and 3.
A long press on the mode button confirms the setting and takes you to the settings for temperature.
Auto off: After 1 minute, the display brightness will return to its default setting (level 2).
Temperature unit
A flashing symbol means that it is possible to adjust the temperature.
Press the mode button to switch between Celsius and Fahrenheit.
A long press on the mode button confirms the setting and takes you back to the Settings mode.
Important!
- The product is only intended for household use under normal operating conditions.
- Do not block the air intakes and outlet in the rear.
- Do not leave the product in direct sunlight or near any heat source, as it may overheat.
- The wall socket must be located near the equipment and must be easily accessible.
- Do not subject the product to wet, moist or excessively dusty environments since this can cause damage to the unit.
- Children should be supervised to ensure they do not play with the product.
- The product does not measure carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device upon accidents involving combustion processes and hazardous chemicals.
- Be sure to not exceed the maximum USB cable length recommended for the device.
- Never use a damage or faulty USB cable, since this can damage or harm the power adapter or your product.
- Unplug the product from the power source before cleaning and when it is not in use.
Save these instructions for future use.
Factory reset
Quick-press the pairing button 4 times to perform a factory reset.
Care instructions
Wipe with a soft cloth moistened with a little mild detergent. Use another
soft, dry cloth to wipe dry.
Note!
Never use abrasive cleaners or chemical solvents as this can damage the
product.
Product servicing
Do not attempt to repair this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks.
Technical data
- Model: VINDSTYRKA air quality sensor
- Type: E2112
- Input: 5.0 VDC, 1.0 A, 0.5 W, USB-C
- Particle detection range: 0~1000 µg/m3
- Radio range: 10 m in open air
- Operating frequency: 2400~2483.5 MHz
- Output power: 8 dBm
- Operation temperature: 0°C to 40°C
- Operating humidity: 0 to 95% RH
- Max USB cable length: 3.0 m/9’8”
Indoor use only
Manufacturer: IKEA of Sweden AB
Adress: Box 702, SE-343 81 Älmhult, SWEDEN
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
Instruction
