ELSEMA ML500 Magnetic Lock User Guide
- June 4, 2024
- ELSEMA
Table of Contents
ELSEMA ML500 Magnetic Lock
Features
- Dual Voltage. 12/24VDC User selectable.
- For outdoor use
- Holding Force up to 500KG/1200lbs
- Corrosion free
- No noise
- No magnetism during power failure
- Built-in Voltage spike suppressor
Application
- Sliding gates or swing gates
- Overhead doors or door entrance
Description
The ML500 is an electromagnetic lock which is designed to hold up to 500Kg
force. The ML500 magnetises when 12/24VDC is applied to the supply wires. The
ML500 is ideal for installation on automatic sliding or swing gates, doors
etc.
The lock can be mounted directly or with the L bracket supplied. It must be
rigidly mounted to the gate post. The armature is designed to pivot slightly
to compensate for reasonable misalignment.
Due to the wide diversity of gate designs custom mounting brackets may be
necessary to facilitate the installation.
L-Z bracket can be used to accommodate the majority of gate and door
applications. The lock is mounted to the vertical gate post. The armature is
mounted to the leading edge of the gate.
Technical Data
| Power Source | 12 Volts DC | 24 Volts DC |
|---|---|---|
| Operating Current | 500mA | 250mA |
| Holding Force | 500Kg, 1200lbs. | |
| Output | Reed switch output: COM, NO, NC. Rated at 500mA at 30VDC/AC | |
| Connections | Striped wire | |
| Shipping Weight (Including brackets) | 4500 grams |
Dimensions
| Lock| 220 x 70 x 50mm
Armature| 185 x 61 x 16mm
Input Voltage selection/ Output
- 12VDC :
- Connect Black and Blue wires together for negative (-12VDC)
- Connect Red and Green wires together for positive (+12VDC)
- 24VDC : Connect Green and Blue together and supply 24VDC to Red and Black wires. Red for positive and black for negative.
Reed switch output (indicates when the armature is engaged with the magnet)
- Common: Orange
- Normally Closed: White
- Normally Open: Yellow
Typical Installations for gates
L-Z Bracket Assembly
Manufactured by
Elsema Pty Ltd
31 Tarlington Place, Smithfield NSW 2164, Australia
Ph: 02 9609 4668
Website: http://www.elsema.com