Leviton 47603-412 TLDM W/8-WAY 2 GIG SPLITTER User Manual
- June 4, 2024
- Leviton
Table of Contents
Leviton 47603-412 TLDM W/8-WAY 2 GIG SPLITTER
Introduction
Leviton has more than 110 years of experience in electrical devices including over 30 years of experience in the home automation industry and data connectivity. Through investment in research and development, manufacturing, distribution, human capital and training, Leviton’s century of heritage provides a strong foundation and commitment to continuous improvement, high standards and innovation to the industry.
Specification
- Brand Leviton
- Model 47603-412
- Item Weight 1.3 pounds
- Country of Origin USA
- Color White
- Thickness 1 Inches
- Item Package Quantity 1
- Batteries Included? No
- Dimensions 0 x 0 x 0 inches
What’s In the Box
- TLDM GIG SPLITTER
Product Description
4 X 12 TELEPHONE DISTRIBUTION MODULE TYPE; ABS PLASTIC MATERIAL; WHITE FINISH; 3.5 INCH; 5.8 INCH; 0.063 INCH; NO ADJUSTABLE HEIGHT; PRE-CONFIGURED STRUCTURED CABLING PANEL FOR USE WITH/FITS; NO ASSEMBLY REQUIRED; NO BATTERIES INCLUDED
From the Manufacturer
Leviton’s Pre-configured Structured Cabling Panels combine some of Leviton’s most popular voice, data and radio frequency modules to create an economical, one stop home media distribution point. Some modules are available in expansion styles to fill unused panel slots as shown below. Choose the pre- configured combination that best meets your needs and then enhance it with expansion boards or stand alone modules. 4X12 Telephone distribution board on bracket with 8-Way 2-Ghz splitter.
Features
- 4 X 12 TLDM W/8-WAY 2 GIG SPLITTER
- Product Type: TELEPHONE DISTRIBUTION MODULE
Note : Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Structured Cabling for a Connected Lifestyle
Internet-connected devices now permeate all areas of residential and light commercial
buildings. As a result, developers, business owners, and homeowners require a stronger wireless and wired network infrastructure. By consolidating network equipment in a Levito Wireless Structured Media Center, users can boost network functionality, eliminate clutter, improve cooling of active equipmet, and have an easily accessible location to manage all connected devices.
Connected Home Applications
- Smart speakers
- Whole house audio
- Laptops, PCs, mobile devices
- Lighting controls
- Intelligent thermostats
- Smart TVs
- Streaming media devices
- Game consoles
- Security
- Connected appliances
Inside the Wireless Structured Media” Center
Leviton offers an unparalleled selection of solutions for data networking, telephone, AV, and security distribution. And the Wireless Structured Media Center provides the ideal central distribution point to manage both wireless and wired networks. See the full breadth of our solutions that support the latest residential technologies at Leviton.com/Connected Home
- Structured Media Center
- Data Patching and Distritbution
- Telephone Patching and Distribution
- High-Flex Patch Cords
- User or Service Provider Active Gear
- Premium and Passive CATV Splitters
- Integrated Power Supply
WARNING : California’s Proposition 65
Warranty & Support
If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.
Frequently Asked Questions
Does a splitter weaken the signal?
In order to divide a cable signal across two or more devices, a splitter is utilised. A splitter reduces the signal strength, which may result in sporadic service interruptions or, in rare instances, service failure.
How many splitters should be on a cable line?
Use a splitter with the least number of connections possible (two way splitters will typically have the least signal loss). Avoid using daisy chain splitters (splitter attached to a splitter). A four-way splitter is preferable than three two-way splitters if you require extra ports. Splitters as many as 16 ports have been seen.
How do I know if my splitter is working?
Measure and record the signal source’s level before testing the splitter for through loss. Next, connect a 75 ohm resistor to all but one of the splitter’s output connections. Using a frequency selective voltmeter, check the signal strength at the output port that is not terminated.
What is a passive video splitter?
As a result, the output signals can match the strength of the input signals and the signal’s quality can be maintained while being conveyed across a greater distance. In contrast, impedance-matching components, which don’t need electricity, are used in passive video splitters.
What does dB mean on a cable splitter?
7dB is half again of a 3.5dB loss. That is the very least amount of loss that can occur when splitting a signal. Put a splitter in a garden hose, for example. When the water is split in half, it flows in opposite directions (-3.5dB) (-3.5dB).
Will a splitter slow down internet?
Conclusion. If you already have enough speed going into your house or workplace, installing a cable splitter shouldn’t slow it down. You can experience some problems if your signal is weak to begin with.
Should I ground my cable splitter?
It is not advised to ground through the splitter because a lightning strike or system power surge might effectively melt the splitter’s components together, allowing the surge to harm your gadgets. Your devices won’t be harmed if you don’t have a ground unless you have some sort of surge.
Is there a difference in cable splitters?
Do coax splitters come in different grades of quality? Coax cable splitters come in several varieties. Poor-quality coax splitters can harm the video signal by creating high signal attenuation (signal loss) and numerous reflections that can result in ghosting (shadows on the picture).
Do splitters work both ways?
It is impossible to separate two signals once they have been merged by a splitter that has been connected in reverse. The two combined signals will only be split in two directions as a result.
How do you use a splitter?
The coax cable should be plugged into your room’s wall socket on one end, and
the IN port of your cable splitter should be connected to the other end.
Next, join a coaxial cable by connecting one end to your internet modem or
gateway and the other to a cable splitter’s OUT connector.
What is the power pass on a splitter?
Cable access is made possible by a power pass splitter for numerous TVs. A power passing splitter, also known as a power pass splitter, is a component that transfers power or signal from one end of a cable to two or more output connectors on the other.
Can you use a cable splitter as an extender?
Use one adapter with the Ethernet splitter connector: It can be used as an Ethernet cable extender, but there is only one available port. (2) Use two adapters: By dividing a network into two, two devices can be online at once.
How do you ground a coax cable splitter?
To the grounding screw on the grounding block, fasten the grounding wire. When the wire is secure, loop it around the screw and tighten it with a twist. Next, connect the wire in the same way to the electrical ground by running it there.
What frequency coax splitter should I use?
A 1GHz splitter is at least what you need. 900MHz typically also functions (unless your cable company actually goes above a gig, which I seriously doubt). The splitter is made to pass signals up to 1GHz, as shown by the 1GHz. The decision to purchase power passing may also be yours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>