Roth Energylogic Projectline Wireless Control Installation Guide
- June 12, 2024
- Roth
Table of Contents
Roth Touchline® SL Installation
Roth Touchlines SL Room sensor Mini Living full of energy
Energylogic Projectline Wireless Control
Roth Touchlines SL Room sensor Mini
The sensor can be connected to all Controllers in the Touchline SI
series. Pairing/registering is made the same way on all Controllers using the
same buttons. On the pictures the panel of the Touchline* a Controller, master
Is shown. Insert battery (CR2032 Included) as shown on the thawing.
Pairing/registering the sensor to a zone (channel). Follow step 2 to
7 and press pairing button as shown on step 8. Finish with Menu and after that
press several times on Exit until standard view. All connections must be made
to the Controller (pump, actuators and optionally potential free relay) before
start-up. Please see controller manual for details. 
Once the sensor is connected to the Zone/Channel, the overview
shows: – Temperatures on the thermostat (setpoint 22,0°C, actual 25,0°C) ,
battery (99%), signal strenght (100% – must be at least 10%) and mode of
operation (CON = continously). For more info on the display, see controller
manual. Repeat registration for other sensors, by choosing one of the other
zones (2 to 8) until required number of sensors are connected. ]
Attention! If a sensor is paired to the wrong zone, do not delete the
sensor. Pair the sensor to the correct/new zone and the old pairing will be
deleted.
Mount the lid and turn lightly (2 -3
mm) with a screwdriver or coin.First apply the self-adhesive tape
(included) on the sensor, then the sensor on the wall. The ventilation grooves
must point downwards.
Settings for temperature and mode must be done on the controller’s display. For constant temperature settings follow the steps 13 – 19 below.
If a different mode than constant temperature is wanted, for
example time schedule or time limitation, then follow the below steps below 20
– 26 below. For more information about time schedules, we refer to the online
manual for Roth Touchline® SL Controller — Master.
Picture 26, now shows the new setpoint 22,0°C and the remaining time
for this temperature (01:59). When the time expires the system auto-matically
returns to the original selected constant temperature (19°C).
ROTH UK Ltd| ROTH DANMARK A/S| ROTH SVERIGE AB| ROTH NORGE
AS| ROTH FINLAND OY
---|---|---|---|---
1a Berkeley Business Park
Wainwright Road Worcester WR4 9FA
Phone +44 (0) 1905 453424
E-Mail enquiries@roth-uk.com
technical@roth-uk.com
orders@roth-uk.com
accounts@roth-uk.com
roth-uk.com| Centervej 5
3600 Frederikssund
TIE +45 4738 0121
E-mail: service@roth-danmark.dk roth-
danmark.dk| Hojdrodergatan 22
212 39 Malmo
Tel. +46 40534090
Fax +46 40534099
E-mail: service@roth-sverige.se roth-
sverige.se| Billingstadsletta19
1396 Billingstad
Tel. +47 67 57 54 00
E-mail: service@roth-norge.no
roth-norge.no facebook.com/RothNorge|
Raaseporintie 9 (Talo 2)
10600 Tammisaari
Puh. +35 (0)19 440 330
S-posti: service@roth-finland.fi
roth-finland.f
facebook.com/RothFinland
Installation Roth Touchline® SL sensor mini_20220401
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>