TESLA PrimeSound HQ-880 Soundbar User Manual

: June 12, 2024
: Tesla

Table of Contents

TESLA PrimeSound HQ-880 Soundbar
Product Information
Product Usage Instructions
IMPORTANT SAFETY WARNINGS
Description
Remote controler
DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TESLA PrimeSound HQ-880 Soundbar

TESLA-PrimeSound-HQ-880-Soundbar-PRODUCT

Product Information

The TESLA PrimeSound HQ-880 is a high-quality audio device that provides various modes of operation, including Bluetooth, USB, SD card, and AUX. It features multiple input options, such as Line In and AUX IN, which require specific cables for connection. The device also has USB and SD card inputs for playing music files directly. It comes with a remote control for convenient operation. The device has built-in safety features, including automatic standby mode, which activates after 10 minutes of inactivity or no audio signal. It is important to follow the safety instructions provided in the user manual to prevent damage to the device and ensure personal safety.

The product is compatible with European Union regulations an comes with a warranty. However, the warranty does not cover misuse of the device, failure to follow safety instructions, damages caused by natural elements or unauthorized repairs, and illegible serial numbers.

Product Usage Instructions

To use the TESLA PrimeSound HQ-880, follow these steps:

Connect the device to a power source.
Press the POWER button to turn on the device.
Use the BT button to switch to Bluetooth mode.
Use the USB button to switch to USB mode.
Use the SD button to switch to SD card mode.
Use the AUX button to switch to AUX mode.
For Line In input, connect a 3.5mm cable to the corresponding input port.
For AUX IN input, connect an RCA cable to the corresponding input port.
For USB and SD card inputs, insert the USB drive or SD card into the respective slots.
Use the remote control to adjust the volume, play/pause, skip tracks, and perform other functions.
For additional input options, such as optical input, refer to the user manual for the required cables and instructions.
To mount the device on a wall, ensure that the wall brackets are level using a spirit level.

For more detailed information and updates, please refer to the user manual available on the website www.tesla-electronics.eu.

Dear customer, Thank you for choosing the soundbar TESLA PrimeSound HQ-880. Please, read the safety rules carefully and follow all common safety rules to reduce the risk of damage to the speaker or in case of injury.

IMPORTANT SAFETY WARNINGS

Never place this appliance on any other electrical equipment.
Do not expose the unit to direct sunlight or direct heat.
Make sure you always have easy access to the power cord, plug or adapter.
Do not use this appliance near water.
Only clean the appliance with a dry cloth.
Do not block the ventilation holes. Install according to the manufacturer’s instructions.
Do not install near heat sources such as radiators, stoves or other devices (including amplifiers) that produce heat.
Protect the power cord from damage.
Use only accessories recommended by the manufacturer.
In the event of a thunderstorm or when not using the device, disconnect it from the mains.
All servicing is performed only by qualified service personnel
The device must not be exposed to dripping or splashing water.
Do not place any sources of danger on the unit (eg objects filled with liquid, lit candles).
The battery must not be exposed to excessive heat, eg sun.
Only use recommended batteries.
Polarity must be respected to avoid short circuits.

Caring for your product

Always unplug the appliance if it is not in use and before cleaning it.
Clean the appliance with a soft, damp cloth free of fibers.
Do not use abrasives or abrasive cleaners.

Automatic standby
When playing media from a connected device, the speaker automatically switches to standby mode if:

no button is pushed for 10 minutes
there is no audible signal from the connected device for 10 minutes (European Union standard ERP2).

Description

SD card slot
Active mode indicates ion
On/Off soundbar
Source of signal
Skip backward decrease the volume
S tart/Pause
USB port
External audio source
Skip forward increase volume
Optical input to connect an optical digital audio input
AUX in to connect an external source
Subwoofer output
230 V input
Wall mounting bracket

Remote controler

POWER push to turn On/Off
BT : push for Bluetooth mode
USB : push for USB mode
SD : push for SD card mode
VOLUME+ : push to increase volume
push to skip to the previous track
VOLUME : push to decrease volume
OPT : push for optical output mode
MUTE : push to turn off sound or unmute
AUX : push for AUX mode
LINE IN : push for Line In mode
: push for Start or Pause
: push to skip to next track

Use the CR2025/3V battery for remote control.

External source of audio
The speaker can play audio from an external audio device, such as an MP3 player.

Line In (requires a 3.5mm cable)

Connect the 3.5 mm cable to the Line In on side of the soundbar.
Connect the other end of the 3.5 mm cable to your mobile phone, MP 3 player or other sound source.
Push ” 1 ” on the remote to turn on the
Push the ” LINE IN ” button on the remote to switch to Line
Use the contro ls on the connected device to start playing the sound in the soundbar.

Optical output (requires optical cable)

Connect the optical cable to the optical connector on the rear panel. Connect the other end of the optical cable to the digital audio source.
Pu sh ” 1 ” on the remote to turn on the
Push the ” OPT ” button on the remote to switch to Optical
Use the controls on the connected device to start playing the sound in the soundbar.

AUX IN (requires RCA cable)

Connect the RCA cable to the AU X IN connector on the rear panel.
Connect the other end of the RCA cable to the audio source on your TV, DVD player, stereo system, or gaming system.
Push ” 1 ” on the remote to turn on the
Push the ” AUX ” button on the remote to switch to AUX
Use the controls on the connected device to start playing the sound in the soundbar.

USB mode/SD card mode

Connect the USB flash drive /SD card
The USB port /SD card supports FAT32 format.
Put the MP3 files in the root folder of the USB flash drive /SD card
Push ” 1 ” on the remote to turn on the
Push the ” USB ” button or SD ” on the remot e control to switch to USB mode/SD card mode.
Push I buttons to select the desired track
Push VOL+VOL+” and VOL –“ buttons to adjust the volume.

Bluetooth mode
When pairing with your mobile phone, keep the distance between the speaker and your mobile phone within 1 meter.

Push ” 1 ” on the remote to turn on the
Push the ” BT ” button on the remote control to select Bluetooth
Turn on your Bluetooth mobile phone and scroll through the surrounding devices
After searching, select the TESLA PrimeSound soundbar from the list of Bluetooth devices.
Enter the password or PIN as: ” 0000 ” and press “Yes” to
After pairing successfully, select an entry from the list of Bluetooth devices and press “Connect”.

Mount the speaker on the wall
Use a spirit level to ensure that wall mount brackets on the wall are positioned horizontally.

WARRANTY REPAIR
For warranty repair, contact the dealer where you purchased the TESLA product.

The warranty DOES NOT APPLY to:

using the device for other purposes than it was designed to
normal wear and tear
failure to observe the “Important Safety Instructions” stated in the user manual
electrical or mechanical damage caused by improper use
damage caused by natural elements such as water, fire, static electricity, power surges etcetera
damage caused by an unauthorized repair
unreadable serial number

DECLARATION OF CONFORMITY

We, INTER-SAT LTD, org. složka, declare that this device complies with the essential requirements and other relevant provisions of the standards and regulations relevant to the type of equipment. The full text of the Declaration of Conformity is available at www.tesla- electronics.eu.

This product complies with the requirements of the European Community. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Due to the fact that the product is being developed and improved, we reserve the right to edit the user manual. You can always find the current version of the user manual at www.tesla-electronics.eu. Design and specification may be changed without prior notice, print errors reserved.