sauermann KT120, KH120 KISTOCK Data Loggers User Guide
- June 12, 2024
- sauermann
Table of Contents
sauermann KT120, KH120 KISTOCK Data Loggers User Guide
Quick start guide
Operating temperature, protection of the instruments and information about storage and the battery
- Operating temperature*: KT120: from -40 to +70 °C; KH120: from -20 to +70 °C
- KT120: IP65; KH120: IP20
- Storage temperature: from -40 to +85 °C
Battery power supply: 1 x CR2450 (button battery*)
1) Display
°C: Temperature in °Celsius
°F: Temperature in °Fahrenheit
%RH: Relative humidity (KH 120)
2) Dimensions (mm)
- The battery must be in compliance with the IEC 60086-4 standard.
3) Connections
PC connection input
5) Recorder function
The KISTOCK allows to record the values measured instantaneously, it records
the values according to a predefined interval.
On the other hand, it is possible to operate continuously the KISTOCK thanks
to a loop recording.
3 types of dataset start
The measurement dataset can be launched:
- With a delayed start (with predefined date and time)
- With the software
- With push-button
6 types of dataset stop
You can stop your dataset:
- According to a date and time (if it was started the same way)
- According to a recording duration
- According to a predefined number of recording points
- If the storage capacity of the memory is full
- With “Stop” option of the software
- By holding “OK” key during about 5 seconds, if this function has been previously activated by the software.
6) Mounting
The KISTOCK data loggers have a magnetic mounting, so you can fix it easily.
- Magnetic mounting
- Battery cover
- Locking sign of the battery cover
7) Replace the battery
With 500 days to 3 years* of battery life, KISTOCK devices guarantee long-term
measurements.
To replace the battery:
- Unlock the battery cover.
- Insert the battery (CR 2450 button battery**) with the + pole visible.
- Replace the battery cover with the indicator in front of the opened padlock and close it by turning it towards the right in order to make correspond the indicator with the closed padlock.
*On the basis of 1 measurement each 15 minutes at 25 °C.
**The battery must be in compliance with the IEC 60086-4 standard.
8) Accessories
Please refer to the data sheet to get more information about available accessories.
Maintenance : please avoid any aggressive solvent. Please protect the device from any cleaning product containing formalin, that may be used for cleaning rooms or ducts.
Precautions for use: please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the device.
Download the full manual
Customer service portal Portail service clients
Use our Customer service portal to contact us
Sauermann Industries
ZA Bernard Moulinet
24700 – Montpon – France