JIMMY BX7 Pro Anti-Mite Vacuum Cleaner User Guide

: June 12, 2024
: JIMMY

JIMMY BX7 Pro Anti-Mite Vacuum Cleaner User Guide

Product Installation
Parts Name

Packing List

Name

| Anti-mite Vacuum

Cleaner

|

Power Cord

|

MIF Filter

|

Mini-brush

|

User Guide

---|---|---|---|---|---
Quantity| 1| 1| 1| 1| 1

Use of the Product

Insert the power cord into the machine and plug into the socket. Press on/off button,the machine is in vacuuming+UV+tapping mode and all indicators light up. Press the mode button to switch the machine to tapping+vacuuming mode. Press the mode button again to switch the machine to UV+vacuuming mode. Press the mode button again to switch back to the UV+tapping+vacuuming mode. Press on/off button again, the machine stop working(The LED display area has the dust sensor function. When in clean state, the dust concentration light turns blue. When in dirty state, the dust concentration light turns red. As the dust concentration decreases, the dust concentration light slowly changes from red to blue.)

Note:

When the LED display shows brush trapped mode and the icon flash, please clean the filter and brushroll in
For safety reasons, the UV light only works within 3cm above object as well as less than 30 inclination Otherwise, the UV light will automatically turn off.
Do not touch the air outlet on the bottom of the machine in case of hand

LED Display

Cleaning and Maintenance

Note:

Filters are available at
It is recommended to clean the dust cup after each When the filter is blocked due to excessive dust accumulation, it needs to be cleaned and replaced if necessary.

Dust Cup Cleaning

Turn off the machine and unplug the power Then press the release button and lift upward. (Figure 1)
Hold the dust cup and dust cup cover separately, twist dust lid anticlockwise (Figure 2), remove it from dust cup to (Figure 3)

Filter and Cyclone Cleaning

Hold the cyclone in one hand, pinch the “UP” logo with the other hand, and take out the filter (Figure 4). Please tap the filter downward.Do not tap the
filter in reverse side in case of filter clog(Figure 5).
Clean the cyclone metal filter with the attached mini brush. (Figure 6)

After cleaning the dust cup, filter and cyclone, assemble the cyclone into the dust cup. Rotate the dust cup cover assembly into the dust cup until a “click” sound is heard that is assembled in
Marking ribbon place. (Figure 7)

After cleaning the dust cup, filter and cyclone, assemble the cyclone into the dust cup. Rotate the dust cup cover assembly into the dust cup until a “click” sound is heard that is assembled in place. (Figure 7)

Note:

Do Not miss the filter!
Use water or neutral reagents to clean dust cup and wipe with dry cloths. Do not wash the filter until it is necessary.
Make sure the filter and dust cup are completely dry before another use.

Brushroll Cleaning and Installation

Turn off the machine and unplug the power cord, rotate the right lock knob anticlockwise with hand from locked position to unlock position (Figure 8) to remove the brushroll to clean up. (Figure 9)
After brushroll cleaning,install the brushroll and the brushroll cover into the machine in turn(Figure 10) and lock the latch of the brushroll. (Figure 11)

Note: For safety reasons, please turn off the machine and unplug power cord before cleaning brushroll.

Maintenance and Storag

Please clean dust cup and filter after each use for further use. It is recommended to replace a filter after 30-50 hours of working time(depending on specific situation) for better use.
Dust sensor cover Any paper, lead glass, plastic will greatly affect the effect of UV light. Please wipe and clean the UV tube regularly for better use. Do Not touch the UV tube as dirt will affect UV light effect.

Put the machine in cool and dry place if the machine is to be idled. Do Not leave it in direct sunlight or humid environment
The dust sensor cover in the air duct need to be cleaned regularly to avoid affecting the transmission and reception of infrared signals. (Figure 12)

Cautions

Please read this instruction manual carefully before use and keep it properly for future use. Never leave the machine working without supervision.
Please turn off the power switch and unplug the power cord if the machine is to be idled. Do Not unplug the power cord with humid hand in case of electric shock.
Cut the power source in maintenance or off-service
Keep the power cord away from sharp objects and do not drag the cord to move the machine in case of cord damage.
For safety reasons, please do not use the product to clean hot objects such as carbon, cigarette butts, sharp objects such as broken glass, corrosive liquids, flammable and explosive materials such as gasoline and alcohol. Otherwise it may cause product damage or fire.
Do not use this product to clean water or wet dust. Do Not operate it in humid places (such as bathroom, toilet, laundry room, etc.) to avoid malfunction.
Do Not place the machine near heating appliances or expose it to direct sunlight in case of fire hazard.
Keep this product beyond the reach of special individual such as children without adult supervision.
Do Not operate this machine with suction port blocked in case of product damage.
The product has UV light, for safety reasons, Do Not look at the bottom of the machine when the power is on in case of ultraviolet rays harming.
Do not apply this product to plants. Excessive use of UV may cause object damage. Do not sit on this product in case of personal injury and product damage.
Do not remove the brushroll cover or force the cover outward when the machine is powered on for safety reasons.
This product can ONLY use for cleaning of textiles such as mattresses, blankets, pillows, sofas, etc.
If the power cord is damaged, please ask for professional help of the manufacturer and other professionals for safety reasons.

Trouble Shooting

Please check the following trouble points before go to the maintenance department.

Problems	Possible Reasons	Solution

Power failure

| Power cord is not firmly inserted.| Insert the power cord firmly.
No power on socket.| Check the socket.
Power switch not pressed.| Press the On/Off button.

Low suction power

| Suction port clogged.| Clean up suction port.
Dust accumulation on filter.| Clean up the dust cup and filter.
Dust accumulation on cyclone.| Clean up cyclone.

UV light failure

| The UV function is automatically off for safety reasons or weak reflec-

tion of object.

| The UV function operates on the condition of less than 3CM height

from the object.

The machine operates on the same

position for a long time.

| Move the machine forward and

backward

The machine is placed upright.| Machine tilted no more than 30 de-

grees.

Sensor window is contaminate.

| Clean the sensor window with a half-dry cloth.
UV light damage.| Contact after-sale service.

Automatically turned off

| Dust cup full.| The machine will automatically turn off to prevent the motor under long operation. If the machine automat- ically turned off , please clean up the dust cup and filter, unplug pow-

er cord and reuse if after 2 hours.

Suction port clogged.

Filter blocked.

Brushroll failure

| Brushroll tangled with foreign matter.| Remove the cover and clean up brushroll according to user guide.

Belt broken.

| Remove the cover according to user guide and check the belt. If

broken, contact after-sale to repair.

Note:If fault remains after adopting the following solutions, contact after sale service or local distributor immediately.

Product Specifications

Technical Parameter

Model	BX7 Pro
Rated voltage	220V-240V~
Rated frequency	50Hz
Rated power	700W

Circuit Diagram

Manufacturer Information

Manufacturer

|

Kingclean Electric Co., Ltd

---|---

Address

| No.1 Xiangyang Road, Suzhou New District, Jiangsu Province 215009,China

Disposal

The machine, accessories and packaging should be sorted for environmental- friendly recycling.
Do not dispose of the machine into household waste
Only for EC countries: According to the European Guideline 2012/19/EU, machine that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner. Subject to change without notice.

Warranty Information

This product enjoys one year warranty for the machine, service starting from the date of purchase.
Excluded from the guarantee is normal wear, commercial use, alterations to the appliance as purchased, cleaning activities, consequences of improper use or damage by the purchaser or a third person, damage, that can be attributed to external circumstances or caused by the batteries.