HALO HZ-1007-ANA Elite1B Countertop Griddle Instructions

HALO HZ-1007-ANA Elite1B Countertop Griddle Instructions

WARNING
The manufacturer has made every effort to eliminate any sharp edges. However, you should handle all components with care to avoid accidental injury.

NOTICE: Before assembly, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the appliance. Contact customer service for replacement parts at 1-833-572-1688.

NEED MORE INSTRUCTIONS?
Scan for registration, assembly videos, care + use, warranty, recipes, + more.

BATTERY NOT INCLUDED. Requires 1 AA battery for igniter.

ASSEMBLY INSTRUCTION

Attach legs using eight (8) M6 x 15 mm screws. Insert one AA battery

into the igniter module.

NOTE: Peel off igniter cap sticker before first use

Install the griddle plate

Install lid handle using two (2) M6 x 15 mm screws. Install control knob

and leveler

Install “JJ” hook handles at the back of the unit. “JJ” hooks will snap

in to lock in place

Install grease cup cover plate by aligning 4 tabs on the cover plate with

the lanced tabs on the grease cup to secure the cover in place. Install the grease cup

NOTE: Make sure the lip of the grease cup is positioned under the griddle drip ledge when installing the grease cup to avoid grease leakage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>