MEAN WELL MPS-30 Series 30W Single Output for Medical Type Instruction Manual

: June 4, 2024
: MEAN WELL

Table of Contents

Features
SPECIFICATION
Mechanical Specification
Block Diagram
Derating Curve
Static Characteristics
Read User Manual Online (PDF format)
Download This Manual (PDF format)

30W Single Output for Medical Type
M P S – 3 0 series

MEAN WELL MPS-30 Series 30W Single Output for Medical
Type

Features

Universal AC input / Full range
Low leakage current <200pA
Protections: Short circuit / Overload / Over voltage / Over temperature
Medical safety approved (2 x MOPP between primary to secondary)
Fixed switching frequency at 100KHz
Low cost
High reliability
3 years warranty

SPECIFICATION

MODEL| MPS-30-5| MPS-30.12| MPS-30-15| MPS-30-24| MPS-30-27| MPS-30-48
---|---|---|---|---|---|---
OUTPUT| DC VOLTAGE| 5V| 12V| 15V| 24V| 27V| 48V
RATED CURRENT| SA| 2.5A| 2A| 1.2A| 1.1A| 0.6A
CURRENT RANGE| 0 – 5A| 0 – 2.5A| 0 – 2A| 0 – 12A| 0-1.1A| 0 – 0.6A
RATED POWER| 25W| 30W| 30W| 28.8W| 29.7W| 282W
RIPPLE & NOISE (ma) Note.2| 80mVp-p| 120mVp-p| 150mVp-p| 240mVp-p| 240mVp-p| 240mVp-p
VOLTAGE TOLERANCE Note.3| i 3.0%| r 3.0%| 13.%| 13.%| 13.%| 12.%
LINE REGULATION| 11.%| 11.%| 11.%| 11.%| 11.%| 11.%
LOAD REGULATION| 12.%| -1.%| 11.%| 1.1.0%| 11.%| 11.%
SETUP, RISE TIME| 500ms. 30ms/230VAC SOOms. 30ms/115VAC at ful load
HOLD UP TIME (Typ.)| 70ms/230VAC 12ms/115VAC at full load
INPUT| VOLTAGE RANGE| 88 – 264VAC aub switch 120 – 370VDC
FREQUENCY RANGE| 47 – 63Hz
EFFICIENCY (Typ.)| 72% I 75% 178% 177% I 78% 178%
AC CURRENT (Typ.)| 0.8A1115VAC 0.5A/230VAC
INRUSH CURRENT (Typ.)| COLD START 30N230VAC
LEAKAGE CURRENT| Earth leakage current < 20001264VAC
PROTECTION| OVERLOAD| Above 105% rated output power
Protection type: Hiccup mode. recovers automatically after the fault condition is removed
OVERVOLTAGE| 5.5 -6.75V 1 132 – 18.2V 1 16.5 -2025V 1 26.4 -32.4V 1 29.7 – 36.45V 1 52.8 – 64.8V
Protect= type : Hiccup mode. recovers automatically after the fault condition is removed
OVER TEMPERATURE| Shut down of voltage. re-power on to recover
EIMRONNENT| WORKING TEMP.| -10 – •60 C (Refer to ‘berating Curve’)
WORKING HUMIDITY| 20- 90% RH non-condensing
STORAGE TEMP.. HUMIDITY| -20- •85 C.10 – 95% RH
TEMP. COEFFICIENT| ±0.03%1C (0 – 50t)
VIBRATION| 10- 500Hz. 2G 10mindlcycle. period for 60min. each along X. Y.Z axes
SA TY &FE EMC (Note 4)| SAFETY STANDARDS| ANSI/MMI E560601-1. TUV EN60601-1.1E080601-1 approved
ISOLATION LEVEL| Primary-Secondary: 2xMOPP. Primary-Earth:1 xMOPP
WITHSTAND VOLTAGE| VP-0/P:IKVAC IIP-FG2KVAC OiP-FG:SHORT
ISOLATION RESISTANCE| 1/P-011s, I/P-FG:100M Ohms / 500VDC / 25C/ 70% RH
EMC EMISSION| Compliance to EN55011 (CISPR11) Class B. EN61000-3.2.-3
EMC IMMUNITY| Compliance to EN61000-4-22.4.5.6.8.11.EN55024.EN60601.1-2. medical level. criteria A
OTHERS| MTBF| 547Khrs min. ML-HDBK-217F(2512)
DIMENSION| 101.6’65.8’23.5mm (12WIH)
PACKING| 0.16Kg: 90pcs/15.8Kg11.06CUFT
NOTE| I. AI parameters NOT specially mentioned are measured at 230VAC Mal rated load and 26-c cr ambient temperature.
2 Ripple & noise are measured at 2014H2 of bandwidth by usrg it twisted pa ‘woe terminated with a 0.1u18 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation, and load regJabcn.
4. The power supply is considered a component that will be instated into the final equipment. Al the EKE tests are been executed by mounting the unit on a 36Orrrn*360mm metal plate with Imm of thickness. The foal equipment must be re-confirmed that it sat meets EMC directives. For guidance on how to perform these EMC tests. please refer to ‘EMI testing of component power supplies: (as eyelet: Ile on herps:/www.menwell.com
5. When the input voltage s Ic6s than 40VAC. the SPS may exhibit degradation of performance. The final product manufacturers must re-confirm xis deviation that does not affect basic safety or essential performance. -‘.. Product Lialolly Osclaimer For detailed information. please refer to herps:/www.menwell.com/serviceDisclaimer.aspx