MEAN WELL PM-15 Series 15W Single Output Medical Grade Switching Power Supply Instruction Manual
- June 4, 2024
- MEAN WELL
Table of Contents
PM-15 Series 15W Single Output
Medical Grade Switching Power Supply
Instruction Manual
Features :
- Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage
- Ultra-miniature size, lightweight
- Cooling by free air convection
- Isolation classⅡ
- Medical safety approved (2 x MOPP between primary to secondary)
- No load power consumption<0.5W
- 100% full load burn-in test
- Fixed switching frequency at 67KHz
- High reliability
- Suitable for BF application with appropriate system consideration
- 3 years warranty
https://www.meanwell.com/Upload/PDF/Medical_EN.pdf
SPECIFICATION
| MODEL | PM-15-3.3 | PM-15-5 | PM-15-12 | PM-15-15 | PM-15-24 |
|---|---|---|---|---|---|
| OUTPUT | DC VOLTAGE | 3.3V | 5V | 12V | 15V |
| RATEDCURRENT | 3.5A | 3A | 1.25A | 1A | 0.63A |
| CURRENT RANGE | 0 – 3.5A | 0 – 3A | 0 – 1.25A | 0 -1A | 0 – 0.63A |
| RATED POWER | 11.55W | 15W | 15W | 15W | 15.12W |
| RIPPLE &NOISE (max.) Note2 | 8OmVpp | 80mVp-p | 150niVp-p | 150mVp-p | 240mVp-p |
| VOLTAGE TOLERANCE Note3 | ±3.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% |
| LINE REGULATION | ±1.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% |
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±0.5% |
| SEM P, RISE TIME | 1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load | ||||
| HOLD UP TIME (Typ.) | 100ms/230VAC 24ms/115VAC at full bad | ||||
| INPUT | VOLTAGE RANGE | 85 – 264VAC 120 – 370VDC | |||
| FREQUENCY RANGE | 47 – 440Hz | ||||
| EFFICIENCY (Typ.) | 73% | I 76% | I 78% | I 79% | 181% |
| AC CURRENT (Typ.) | 0.35A/115VAC 0.2A/230VAC | ||||
| INRUSH CURRENT gyp.) | COLD START 30A/115VAC 50N230VAC | ||||
| LEAKAGE CURRENT Note.S | Touch current < 80J A/264VAC | ||||
| PROTECTION | OVERLOAD | Above 105% rated output power |
Protection type: Hiccup mode, recovers automatically after faultconedbon is
removed
OVERVOLTAGE| 3.8 – 4.95V| 1 5.75 – 6.7W| 1 13.8 -16.2V| I 17.25 – 2025V| I
27.6 – 32.4V
Protection type: Shutoff rip voltage, clarnzing by Zenit diode
ENROLLMENT| WORKING TEMP.| -20 – +70°C (Refer to “Deratbg Curve”)
WORKING HUMIDITY| 20 -90% RH non-condensing
STORAGE TEMP., HUMIDITY| .40 – +85°C, 10 – 95% RH
TEMP. COEFFICIENT| ±0.03%fC (0 – 50°C )
VIBRATION| 10 – 500Hz, 2G 10min.bicycle, the period for 60m h. each along X,
Y, Z axes
SAFETY &
EMC (Note 4)| SAFETY STANDARDS| ANSI/AAMI ES60601-1, TUV EN60601-1,
IEC63601-1, U160950-1, EAC TP TC 004 approved
ISOLATION LEVEL| Privary-Secondary:2xMOPP
WITHSTAND VOLTAGE| I/P-0/P:4KVAC
ISOLATION RESISTANCE| I/P-01P:100M Ohms! 500VDC / 25’C/ 70% RH
EMC EMISSION| Compiance to EN55011(CISPR11),EN55032 (CISPR32) Class B,
EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY| Compliance to E N61000-4-2,3,4,5,6,8,11, EN55024, EN 60601-1-2,
E N61204-3, medical level, criteria A, EAC TP TC 020
OTHERS| MTBF| 499.710trs min. MIL-HDBK-217F (25°C)
DIMENSION| 75’53’22.7mm (L’W’H)
PACKING| 0.14Kg; 120pcs/17.8Kgr0.94CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated bad, and 25`C of ambient temperature.
2. Fipple & noise are measured at 20MHz of bandwidth by using a 12 twisted
pair-wire terminated with 0.1 up & 4711 parallel capacitors.
3. Tolerance: includes set up tolerance, line regulation, and load
regulation.
4. The power supply is considered a component that will be installed into the
final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Touch current was measured from primary input to DC output
6. The ancient temperature devoting of 3.51C/1000m with farness models and of
51C/1000m with fan models for operating altitudes higher than 2000m(6500f0
Mechanical Specification
Block Diagram
Derating Curve
Output Derating VS Input Voltage
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>