KarliK Mini Series Illuminating Module LED for Switches Instruction Manual
- June 12, 2024
- KarliK
Table of Contents
KarliK Mini Series Illuminating Module LED for Switches
Product Information
The Assembly Manual Illuminating Module LED is designed for switches of the Mini Series. It provides illuminated indication for switches and comes in various colors.
Colours Available
The illuminating module LED is available in the following colors:
- White
- Blue
- Green
- Red
Product Usage Instructions
To use the Illuminating Module LED for switches of the Mini Series, follow these steps:
- Select the desired color for the illuminating module LED from the available options: white, blue, green, or red.
- Ensure that the switch of the Mini Series is compatible with the illuminating module LED.
- Refer to the switch’s user manual for instructions on how to install and remove the illuminating module LED.
- Carefully attach the illuminating module LED to the switch according to the provided instructions.
- Once properly attached, test the illumination by turning on the switch.
- If necessary, adjust the position of the illuminating module LED to achieve optimal illumination.
- Refer to the switch’s user manual for instructions on how to troubleshoot any issues related to the illuminating module LED.
ASSEMBLY MANUAL ILLUMINATING MODULE LED FOR SWITCHES OF MINI SERIES
Characteristics of the module
Illuminating module LED is intended for installation by the customer himself
in switches of ICON serie of the following types: MWP-1, MWP-2, MWP-3,
MWP-3.1, MWP-4, MWP-5, MWP-6, MWP-6.1, MWP-9, MWP-10.1, MWP-10.11, MWP-4.1,
MWP-44.1, MWPUS-1, MWPUS-2, MWPUS-3, MWPUS-3.1, MWPUS-4, MWPUS-5, MWPUS-6,
MWPUS-6.1, MWPUS-9, MWPUS-10.1, MWPUS-10.11, MWPUS-4.1, MWPUS-44.1 and their
colour variants.
Note! Do not use with switches of the following types: MWP-7, MWP-8, MWP-8.1, MWP-44.2, MWP-66, MWP-66.1, MWP-88, MWP-88.1, MWP-33, MWP-33.1, MWP-10.2, MWP-10.21, MWPUS-8, MWPUS-44.2, MWPUS-33, MWPUS-33.1, MWPUS-10.2, MWPUS-10.21.
Way of connection
Illuminating module LED shall be set parallelly in a slot in the switch box
(according to the picture). Next, prior to the installation of
buttons/buttons, the external frame shall be installed.
Note! Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards.
Colours available for the illuminating module LED
from left: white, blue, green, red
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>