karlik DWP-1 Single-Pole Switch Mechanism Instructions
- October 30, 2023
- KarliK
Table of Contents
ASSEMBLY MANUAL IP44 SEALANT TO SWITCHES
OF DECO, ICON, MINI AND FLEXI SERIES
Characteristics of the sealant
The sealant (IP44) is intended for installation by the customer himself in switches of DECO, ICON, MINI and FLEXI series type:
| Seria | Symbol produktu |
|---|---|
| DECO | DWP-1, DWP-2, DWP-3, DWP-3.1, DWP-4, DWP-4.1, DWP-5, DWP-6, DWP-6.1, |
DWP-8, DWP-8.1, DWP-9, DWP-10.1, DWP-10.11, DWP-10.2, DWP-10.21, DWP-33,
DWP-33.1, DWP-44.1, DWP-44.2
ICON| IWP-1, IWP-2, IWP-3, IWP-3.1, IWP-4, IWP-4.1, IWP-5, IWP-6, IWP-6.1,
IWP-8, IWP8.1, IWP-9, IWP-10.1, IWP-10.11, IWP-10.2, IWP-10.21, IWP-33,
IWP-33.1, IWP-44.1, IWP-44.2
MINI| MWP-1, MWP-2, MWP-3, MWP-3.1, MWP-4, MWP-4.1, MWP-5, MWP-6, MWP-6.1,
MWP-8, MWP-8.1, MWP-9, MWP-10.1, MW P-10.11, MWP-10.2, MWP-10.21, MWP33,
MWP-33.1, MWP-44.1, MWP-44.2
FLEXI| FWP-1, FWP-2, FWP-3, FWP-3.1, FWP-4, FWP-4.1, FWP-5, FWP-6, FWP-6.1,
FWP-8, FWP-8.1, FWP-9, FWP-10.1, FWP-10.11, FWP-10.2, FWP-10.21, FWP-33,
FWP-33.1, FWP-44.1, FWP-44.2
Way of connection
The sealer U-1 shall be set between the switch cube and the central sheet of
the mechanism.
In the correct position there are two external buttons in the slots of the
sealer. Next, prior to installation of button/buttons, the external frame
shall be installed.
The way of setting is presented on the schema below
Accessories required for the sealant IP 44
Together with the sealer U-1 a DRPH (for DECO series), MKLH-1 / MKLH-2 (for
MINI and ICON series) or FRH (for FLEXI series)a middle/external frame/press
(for DECO/ICON/MINI/FLEXI series) shall be purchased for switch IP 44
available in different colour variants (to be also used in multiframes).
Note!
Assembly shall be held by a suitably qualified person with deactivated voltage
and shall meet the national safety standards.
Karlik Elektrotechnik Sp. z o. o.
ul. Wrzesihska 29 I 62-330 Nekla
tel. +48 61 437 34 00
e-mail: [email protected]
www.karlik.pl