KarliK IWP-1 Illuminating Module LED for Switches Of Icon Series Instruction Manual
- October 30, 2023
- KarliK
Table of Contents
IWP-1 Illuminating Module LED for Switches Of Icon Series
Instruction Manual
ASSEMBLY MANUAL ILLUMINATING MODULE LED FOR SWITCHES OF ICON SERIES
Characteristics of the module
Illuminating module LED is intended for installation by the customer himself
in switches of ICON serie of the following types: IWP-1, IWPUS-1, IWP-2,
IWPUS-2, IWP-3, IWPUS-3, IWP-3.1, IWPUS-3.1, IWP-4, IWPUS-4, IWP-4.1,
IWPUS-4.1, IWP-5, IWPUS-5 , IWP-6, IWPUS-6, IWP-6.1, IWPUS-6.1, IWP-9,
IWPUS-9, IWP-10.1, IWPUS10.1, IWP-10.11, IWPUS-10.11, IWP-44.1,IWPUS-44.1,
IWP-44.2, IWPUS-44.2 and their colour variants.
Note! Do not use with switches of the following types: IWP-7, IWP-8,
IWPUS-8, IWP-8.1, IWP-88, IWP-88.1, IWP-33, IWPUS-33, IWP-33.1, IWPUS-33.1,
IWP-10.2, IWPUS-10.2, IWP-10.21, IWPUS-10.21
Way of connection
Illuminating module LED shall be set parallelly in a slot in the switch box
(according to the picture).
Next, prior to installation of button/buttons, the external frame shall be
installed.
Note! Assembly shall be held by a suitably qualified person with
deactivated voltage and shall meet the national safety standards.
The way of setting is presented on the schema below
Colours available for the illuminating module LED
from left: white,
blue, green, red
Karlik Elektrotechnik Sp. z o. o.
ul. Wrzesioska 29
62-330 Nekla
tel. +48 61 437 34 00
e-mail:[email protected]
www.karlik.pl
Documents / Resources
|
KarliK IWP-1 Illuminating Module LED for Switches Of Icon
Series
[pdf] Instruction Manual
IWP-1, IWPUS-1, IWP-2, IWPUS-2, IWP-3, IWPUS-3, IWP-3.1, IWPUS-3.1, IWP-4,
IWPUS-4, IWP-4.1, IWPUS-4.1, IWP-5, IWPUS-5, IWP-6, IWPUS-6, IWP-6.1,
IWPUS-6.1, IWP-9, IWPUS-9, IWP-10.1, IWPUS10.1, IWP-10.11, IWPUS-10.11,
IWP-44.1, IWPUS-44.1, IWP-44.2, IWPUS-44.2, IWP-1 Illuminating Module LED for
Switches Of Icon Series, Illuminating Module LED for Switches Of Icon Series
---|---