BLAUPUNKT Bluebot App Installation Guide

BLAUPUNKT Bluebot App

Product Information

The product mentioned in the user manual is the Bluebot robot, which requires the Bluebot app for installation and usage. The Bluebot app can be downloaded from the Appstore for iOS devices or Google Play for Android devices. The robot has a charging station and a Wi-Fi indicator for connectivity.

Product Usage Instructions

1. Place the Bluebot robot in the charging station to charge. Ensure that it is fully charged before use.
2. Remove the robot from the charging station.
3. Make sure the robot is turned on by holding the ‘On button’ on top of the robot for a few seconds. Wait until the robot has started fully.
4. Download the Bluebot app from the Appstore or Google Play.
5. If you are a new user, register a new account in the Bluebot app.
6. Open the Bluebot app and press the ‘+ icon’ to add your device.
7. Select the Bluebot Precision Plus model.
8. Enter the password when prompted and confirm.
9. Make sure the robot is removed from the charging station after registration. Turn on the robot by pressing the On button. Then, long-press the recharge button for more than 3 seconds until the Wi-Fi indicator starts flashing.
10. In your device’s Wi-Fi settings, select the ‘SmartLife xxx’ network from the list.
11. Return to the Bluebot app and press the ‘Go to connect’ button at the bottom of your screen.
12. Your Bluebot robot will now connect to the Bluebot app.

INSTALLATION BLUEBOT APP

BLUEBOT APPLICATION

1. Fully charge robot
2. Download Bluebot app
3. Steps for registration
4. Connect robot with app (steps)

Place the robot in the charging station to charge and make sure it’s fully charged before use.

Remove the robot from the charging station.

Make sure the Robot is on, by holding in the ‘On button’ for a few seconds on top of the robot. Wait until the robot has started fully.

Download the Bluebot app. The app can be found in the Appstore and Google Play.

Register a new account if you are not yet an existing user.

Open the Bluebot app and press the ‘+ icon’ to add your device.

Select the BLUEBOT PRECISION PLUS

Select your wifi network, enter the password and press confirm.

After your registration, make sure the robot is removed from it’s charging station. Turn on your robot by pressing the “On button”. After that is done, long press the recharge button for more than 3 seconds until Wi-Fi indicator starts !ashing.

Tick “Con”rm indicator blinks slowly” when applicable and press ‘Next ’.

Press on the ‘Go to connect’ button in the bottom of your screen.

Select the ‘SmartLife xxx’ network from the list and return to the Bluebot app. Your robot will now connect to the App.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>