KarliK Deco Series Illuminating Module LED for Switches Instruction Manual
- June 12, 2024
- KarliK
Table of Contents
KarliK Deco Series Illuminating Module LED for Switches
Product Information
The Illuminating Module LED for Switches of Deco Series is an accessory that
can be added to switches in the Deco Series. It provides a visual indicator of
the switch’s status by emitting light in different colors.
Colours available for the illuminating module LED:
- White
- Blue
- Green
- Red
Product Usage Instructions
- Choose the desired color of the illuminating module LED from the available options: white, blue, green, or red.
- Ensure that the switch you want to attach the illuminating module to is from the Deco Series.
- Locate the dedicated slot on the switch for attaching the module.
- Align the module with the slot and gently insert it until it fits securely.
- If necessary, repeat steps 3 and 4 for additional switches.
- Once all switches have the illuminating modules attached, connect the switches to the power source.
- The illuminating module LED will now emit light in the chosen color, providing a visual indication of the switch’s status.
Characteristics of the module
Illuminating module LED is intended for installation by the customer himself
in switches of DECO series of the following types: DWP-1, DWP-2, DWP-3,
DWP-3.1, DWP-4, DWP-5, DWP-6, DWP-6.1, DWP-9, DWP-10.1, DWP-10.11, DWP-4.1,
DWP-44.1, DWPUS-1, DWPUS-2, DWPUS-3, DWPUS-3.1, DWPUS-4, DWPUS-5, DWPUS-6,
DWPUS-6.1, DWPUS-9, DWPUS-10.1, DWPUS-10.11, DWPUS-4.1, DWPUS-44.1 and their
colour variants.
Note: Do not use with switches of the following types: DWP-7, DWP-8,
DWP-8.1, DWP-44.2, DWP-66, DWP-66.1, DWP-88, DWP-88.1, DWP-33, DWP-33.1,
DWP-10.2, DWP-10.21, DWPUS-8, DWPUS-44.2, DWPUS-33, DWPUS-33.1, DWPUS-10.2,
DWPUS-10.21.
Way of connection
Illuminating module LED shall be set parallelly in a slot in the switch box
(according to the picture). Next, prior to installation of button/buttons, the
external frame shall be installed or the American-style connector part.
Note: Assembly shall be held by a suitably qualified person with
deactivated voltage and shall meet the national safety standards.
The way of setting is presented on the schema below
Colours available for the illuminating module LED
Karlik Elektrotechnik Sp. z o. o.
I ul. Wrzesinska 29 1 62-330 Nekla
tel. +48 61 437 34 00 1
e-mail: [email protected]
www.karlik.pl