AcuityBrands L-Type Track Adapter Installation Guide
- June 12, 2024
- AcuityBrands
Table of Contents
AcuityBrands L-Type Track Adapter
Product Information
The product is an L-Type Track Adapter designed for installation purposes. It is used to connect and secure the adapter box into the track system. The adapter box has a latch and a polarity line for proper alignment and positioning.
Product Usage Instructions
- Locate the latch and the polarity line on the adapter box.
- Align the latch and polarity line as shown in the diagram.
- Insert the adapter box into the track system.
- Rotate the adapter box in the direction of the Install arrow until the latch snaps into place between the two track rails.
- Depress the latch until it reaches its final position.
Second Circuit Positioning
- Hold onto the Adapter Box with one hand.
- Place the end of a flat head screwdriver under the contact shown in the diagram.
- Gently pull up on the screwdriver to move the contact vertically until it hits a hard stop.
- Follow the instructions provided for inserting the adapter box into the track system.
Note: The contact mentioned above is the only adjustable contact. Make sure to adjust it according to your specific requirements. For any further assistance or inquiries, refer to the complete user manual or contact our customer support.
SAVE THESE INSTRUCTIONS
Second Circuit Positioning
- Hold onto Adapter Box with one hand
- Place the end of a flat head screw driver under the contact shown below
- Gently pull up, the contact should move vertically until hitting a hard stop
- Follow instructions for inserting into track
CONTACT
- 1300 S. Wolf Road
- Des Plaines, IL 60018
- 800-323-5068
- www.acuitybrands.com.
©.2017 Acuity Brands Lighting, Inc. Rev 4/18 P4678
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>