NSM 210C Combo Port Gigabit Unmanaged Industrial Ethernet Switch User Manual
- June 5, 2024
- NSM
Table of Contents
NSM-210C User’s Manual
8+2G Combo Port Gigabit Unmanaged Industrial Ethernet Switch
Introduction:
The NSM-210C is 8 Port 10/100 Base copper and 2 Gigabit fiber optic/copper combo port Ethernet Switch, Supports Auto Negotiation , Auto MDI/MDI-X 、high- speed(100 Mbps) and high-distance transmissions . Apart from this, NSM-210C supports dual power and provides a wide +12 VDC ~ +48 VDC power range to fit all the common power standards found in industrial automation, without external power converters.
Features:
- Up to 2 Gigabit uplinks for high bandwidth data aggregation SFP socket for Easy and Flexible Fiber Expansion
- Supports Auto Negotiation and Auto MDI/MDI-X
- Supports Dual +12 ~ 48 VDC power input and 1 relay output
- Supports operating temperatures from –25 ~ +75°C
- DIN-Rail, Wall Mounting (optional)
Specifications:
Technology
__ Standards| IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE
802.3ab for 1000Base-T IEEE 802.3x for Flow Control
MAC Addresses| 8K
Frame buffer memory| 1 Mbit
Flow Control| IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports| 8x 10/100BaseT(X) , 2x 10/100/1000 BaseT(X) (Combo SFP) Auto
negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection
Fiber Ports| 2x 1000Base SFP slot
LED Indicators| PWR1, PWR2, FAULT, SFP & Gigabit Act, 8-Port 10/100 Link and
Act
Ethernet Isolation| 1500 Vrms 1 minute
Power Input
Redundant Input Range| +12 VDC ~ +48 VDC (Non-isolation)
Power Consumption| 0.15A @ 24VDC idle without loading ; 0.25A @ 24VDC with
full loading
Alarm Contact| One relay output with current carrying capacity of 1A @ 30 VDC
Protection| Power reverse polarity protection
Connector| 6-Pin Removable Terminal Block (Power & Relay)
---|---
Mechanical
Chassis| Metal with an IP30 ingress protection rating
Dimensions (W x L x H)| 51 mm x 154 mm x 118 mm
Installation| DIN-Rail or Wall Mounting (with optional kit)
Environmental
Operating Temperature| -25 °C ~ + 75 °C
Storage Temperature| -40 °C ~ + 85 °C
Ambient Relative Humidity| 10 ~ 90% RH, non-condensing
LED Indicator Functions:
| LED | Color | Description |
|---|---|---|
| **** Ethernet Port | Green On | Act |
| Yellow On | Link to 10/100 Mbps | |
| Combo Port | Green On | Act to Port 9 SFP / copper |
| Green On | Act to Port 10 SFP / copper | |
| PWR1 | Green On | This green LED is turned on when power is applied to the PWR1 |
input
PWR2| Yellow On| This yellow LED is turned on when power is applied to the
PWR2 input
Fault| Red On| Loss PWR1 or PWR2 power input
Terminal block Indicator Functions:
| Pin | Function | Description |
|---|---|---|
| 1 | PWR1 | Power1 input +12~+48VDC (V+) |
| 2 | GND1 | Power1 Gnd (V-) |
| 3 | RL_COM | Power Loss Relay COM |
| 4 | RL_NO | Power Loss Relay Normally Open, If Power1 or Power2 Loss, Then this |
pin will connect to RL_COM
5| PWR2| Power2 input +12~+48VDC (V+)
6| GND2| Power2 Gnd (V-)
Combo:
The NSM-210C Port9 & Port10 is Combo port, This port can select SFP or copper,
If a SFP port is being used, then the corresponding 1000BASE-T copper port is
automatically disabled, When power turn on, if use SFP and copper
simultaneously, then copper was disabled.
Redundant Power Input & Power fails Alarm:
Both power inputs can be connected simultaneously to live DC power sources. If
one power source fails, the other live source will act as a backup, and
automatically supplies all of NSM-210C power needs.
Accessories(option):
| DR-120-48 | 48 V/2.5 A, 120 W Single Output Industrial DIN Rail Power Supply |
|---|---|
| MDR-60-48 | 48 V/1.25 A, 60 W Single Output Industrial DIN Rail Power Supply |
| DR-120-24 | 24V/5 A, 120 W Single Output Industrial DIN Rail Power Supply |
| SDR-240-24 | 24 V/10 A, 240 W Single Output Industrial DIN Rail Power Supply |
with PFC Function
Dimensions (unit = mm):
NSM-210C User’s Manual (Version 1.00, Apr/2018)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>