KENWOOD CA-PLT98 Amplifier Side Mounting Plate Instruction Manual
- June 12, 2024
- KENWOOD
Table of Contents
KENWOOD CA-PLT98 Amplifier Side Mounting Plate
Product Information
- Product Name: CA-PLT98
- Manufacturer: JVCKENWOOD Corporation
Important Notes:
- This product is an amplifier side plate.
- For the latest information and updates, please visit the following website: https://manual.kenwood.com/en_contents/search/
Installation Procedure
- Refer to Fig 1.1 for the installation procedure.
- Ensure that you have all the necessary tools and equipment for installation.
- Position the amplifier side plate in the desired location.
- Use screws or other appropriate fasteners to secure the plate in place.
- Double-check the installation to ensure a secure fit.
- Test the functionality of the amplifier side plate before using it with other components.
Note : If you encounter any issues during installation or have further questions, please refer to the product’s instruction manual available on the manufacturer’s website mentioned above.
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon® are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagle® and Tour-Pak® are trademarks or registered trademarks of Harley- Davidson, Inc. and/or its affiliates and if used or implied are for reference only. There is no affiliation between Harley-Davidson, Inc. and/or its affiliates and JVCKENWOOD Corporation and/or its affiliates. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain
the best performance from your new product
Installation procedure
- On the brake side of the bike, remove the 3 factory bolts shown by the white arrows in Fig. 1.1, noting the brake side fairing support bracket will be removed, and not re-used.
- Install the plate into the bike using the factory fasteners just removed, noting it’s best to loosely install all 3 fasteners before tightening.
- Using the supplied “hook and loop” material, secure the amplifier to the plate so it’s oriented with the power harness at the bottom. The extra length of that amp will sit below the main plate by approx.. 1/2” and to the left (brake side) by approx. 1/2”, so the outer fairing will go back on. You will need to adjust accordingly.
NOTE : This kit includes a wire harness with white/black and red/black wires. If you already have an existing XM160-2-98 and are adding a second XM160-2-98, the supplied harness will plug into the “bypass out” on the existing XM160-2-98. This is what sends music from the existing XM160-2-98 to the second XM160-2-98. The white/black pair of wires on the supplied harness will plug into the yellow/black wires (clutch side input) on the second XM160-2-98. The red/black wires on the supplied harness will plug into green/black (brake side input) on the second XM160-2-98. KENWOOD lids and lower fairing speaker kits come with harnesses to get music from the amplifier to them. For other installs, you can modify the output harness that came with your amplifier, noting that the blue is the brake side, and the brown is the clutch side.
For updated information (the latest Instruction Manual, etc.), please visit
the following website:
https://manual.kenwood.com/en_contents/search/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>