Gemline 101736B Golf Bluetooth Speaker Instruction Manual
- June 1, 2024
- Gemline
Table of Contents
Gemline 101736B Golf Bluetooth Speaker
Product Specifications
- Item: 101736-001B
- IPX6 Waterproof Rating
- Operating Distance: 33 ft.
- 1200 mAh Battery
- 40 mm Driver
- Approx. 3 Hour Play Time
- Output Power: 2x 5 Watt
- Input: 5V/500mAh, 3.5mm aux, Type-C
Product Usage Instructions
Button Functions:
- Power ON/OFF (Press and hold 2-3 seconds)
- Previous Song
- Next Song
- Volume Down
- Volume Up
- Play/Pause
LED Indicator Guide :
- Charging: Red LED on
- Fully Charged: Red LED off
- Pairing Mode: Blue LED will flash quickly
- Connected: Blue LED on
- Playing: Blue LED will flash slowly
Pairing the Device/Basic Operations:
- Press the ON/OFF button for 2-3 seconds or until you hear “di di di”.
- On your device’s wireless connection menu, find and select GEMLINE SPKR.
- The blue LED will flash slowly when the pairing is complete, and you will hear “di di”.
- The blue LED will stay on while the speaker is on.
- When the battery is low, the speaker will beep every 20 seconds.
- To turn the speaker off, press and hold the ON/OFF button for 2-3 seconds. You will hear “di di di”.
Charging the Speaker :
- Plug the charging cable into the charging port of the speaker. Plug the USB into a compatible power source.
- The red LED will turn on to indicate if the speaker is charging.
- Once the speaker is fully charged, the red LED will turn off. When the device indicates the battery is low, approximately 4-5 hours of charging time is needed to fully recharge the battery.
Safety Information:
- Do not attempt to disassemble the device.
- Do not expose the device to extreme heat or flames.
- The speaker may become warm while charging. This is normal.
- Ensure all cable connections are removed and port cap is closed and tightly sealed before getting the speaker near water.
- Do not expose the speaker to water while it is charging. This may result in permanent damage to the speaker or power source.
Packing List:
- USB Charging cable
- User Manual
- Kraft box
Safety Distance Requirement:
The device should be installed and used with a minimum distance of 0 mm
between the radiator and your body to meet general RF exposure requirements.
Frequently Asked Questions (FAQ):
-
Q: How do I know when the speaker is fully charged?
A: The red LED indicator will turn off when the speaker is fully charged. -
Q: Can I use the speaker while it is charging?
-
A: It is not recommended to use the speaker while it is charging as this may result in permanent damage to the speaker or power source.
-
Q: How long does it take to fully recharge the bat tery when it is low?
A: Approximately 4-5 hours of charging time is needed to fully recharge the battery when it is low.
Soundpro Waterproof Magnetic Speaker
- IC ID : 21530-101736B
- FCC ID : 2AGR4-101736B
Instruction Manual
SPECIFICATION
- Item: 101736-001B
- IPX6
- 33 ft. operating distance
- 1200 mAh battery
- 40 mm driver
- Approx. 3 hour play time
- Output power- 2x 5 watt
- lnput-5V/500mAh, 3.5mm aux, Type-C
BUTTON FUNCTIONS
- Power ON/OFF (Press and hold 2-3 seconds)
- Previous Song
- Next Song
- Volume Down
- Volume Up
- Play/Pause
LED INDICATOR GUIDE
- Charging: Red LED on
- Fully Charged: Red LED off
- Pairing Mode: Blue LED will flash quickly
- Connected: Blue LED on
- Playing: Blue LED will flash slowly
PAIRING THE DEVICE/BASIC OPERATIONS
Press the ON/OFF button for 2-3 seconds or until you hear “di di di”.
- On your device’s wireless connection menu, find and select “GEMLINE SPKR”.
- The blue LED will flash slowly when the pairing is complete, and you will hear “di di”.
- The blue LED will stay on while the speaker is on.
- When the battery is low. the speaker will beep every 20 seconds.
- To turn the speaker off, press and hold the ON/OFF button for 2-3 seconds.
- You will hear “di di di”.
CHARGING THE SPEAKER
- Plug the charging cable into the charging port of the speaker.
- Plug the USB into a compatible power source
- The red LED will turn on and indicate if the speaker is charging.
- Once the speaker is fully charged, the red LED will turn off. When the device indicates the battery is low, approx.4-5 hours of charging time is needed to fully recharge the battery.
SAFETY INFORMATION
- Do not attempt to disassemble the device.
- Do not expose the device to extreme heat or flames.
- The speaker may become warm while charging. This is normal.
- Ensure all cable connections are removed and port cap is closed and tightly sealed before getting the speaker near water.
- Do not expose the speaker to water while it is charging. This may result in permanent damage to the speaker or power source.
PACKING LIST
- USB Charging cable
- User Manual
- Kraft box
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This
equipment should be installed and used with a minimum distance of 0 mm between
the radiator and your body.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
- This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
- The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>