Di LUSSO DW269SS Dishwasher Instruction Manual
- May 15, 2024
- Di LUSSO
Table of Contents
- Di LUSSO DW269SS Dishwasher
- Product Information
- Product Usage Instructions
- FAQs
- SAFETY INFORMATION
- PRODUCT OVERVIEW
- MAINTENANCE AND CLEANING
- INSTALLATION INSTRUCTION
- TROUBLESHOOTING TIPS
- USING YOUR DISHWASHER
- ERROR CODES
- TECHNICAL INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Di LUSSO DW269SS Dishwasher
Product Information
Specifications
- Model: DW269SS / DW269BP
- Functions: Dishwasher
Product Usage Instructions
Using Your Dishwasher
Before using your dishwasher, make sure to:
- Load the basket properly.
- Fill the rinse aid dispenser (Refer to PART II, section 1).
- Fill in detergent (Refer to PART II, section 1).
Basket Used Tips
Adjusting the Upper Basket:
Type 1:
- Pull out the upper basket.
- Remove the upper basket.
- Re-attach the upper basket to upper or lower rollers for desired height adjustment.
Type 2:
- To raise the upper basket, lift it at the center of each side until it locks into place.
- To lower the upper basket, lift the adjust handles on each side to release and lower it.
Folding Back Shelves:
- Raise cup rack upwards for taller items in upper basket.
- Lower spikes of lower basket to make room for large items.
FAQs
- Q: How do I clean the dishwasher?
- A: Refer to the “Maintenance and Cleaning” section in the user manual for detailed cleaning instructions.
- Q: What should I do if the dishwasher stops working?
- A: Check the troubleshooting tips provided in the manual. If issues persist, seek help from a professional technician.
DW269SS / DW269BP
Part I
Please read this manual carefully before using the dishwasher. Keep this
manual for future reference.
CONTENTS
SAFETY INFORMATION
8 PRODUCT OVERVIEW
9 USING YOUR DISHWASHER 9 Basket Used Tips
11 MAINTENANCE AND CLEANING 11 External Care 11 Internal Care 14 Caring For
The Dishwasher
15 INSTALLATION INSTRUCTION 15 About Power Connection 16 Water Supply And
Drain 17 Connection Of Drain Hoses 18 Position The Appliance 18 Free Standing
Installation
20 TROUBLESHOOTING TIPS
25 LOADING THE BASKETS ACCORDING TO AS/NZS 2007.1
NOTE:
Reviewing the section on troubleshooting Tips will help you solve some common
problems by yourself. If you cannot solve the problems by yourself, please ask
for help from a professional technician. The manufacturer, following a policy
of constant development and updating of the product, may make modifications
without giving prior notice. If lost or out-of-date, you can receive a new
user manual from the manufacturer or responsible vendor.
SAFETY INFORMATION
WARNING When using your dishwasher , follow the precautions listed below:
Installation and repair can only be carried out by a qualified technician This
appliance is intended to be used in household and similar applications such
as: -staff kitchen areas in shops, offices and other working environments;
-farm houses; -by clients in hotels, motels and other residential type
environments; -bed and breakfast type environments. This appliance can be used
by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be done by children
without supervision. (For EN60335-1) This appliance is not intended for use by
persons (including children ) with reduced physical, sensory or
3
mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. (For IEC60335-1 ) Packaging material
could be dangerous for children! This appliance is for indoor household use
only. To protect against the risk of electrical shock, do not immerse the
unit, cord or plug in water or other liquid. Please unplug before cleaning and
performing maintenance on the appliance. Use a soft cloth moistened with mild
soap, and then use a dry cloth to wipe it again.
Earthing Instructions
This appliance must be earthed. In the event of a malfunction or breakdown,
earthing will reduce the risk of an electric shock by providing a path of
least resistance of electric current. This appliance is equipped with an
earthing conductor plug. The plug must be plugged into an appropriate outlet
that is installed and earthed in accordance with all local codes and
ordinances. Improper connection of the equipment-earthing conductor can result
in the risk of an electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the appliance is properly
grounded.
4
Do not modify the plug provided with the appliance; If it does not fit the
outlet. Have a proper outlet installed by a qualified electrician. Do not
abuse, sit on, or stand on the door or dish rack of the dishwasher. Do not
operate your dishwasher unless all enclosure panels are properly in place.
Open the door very carefully if the dishwasher is operating, there is a risk
of water squirting out. Do not place any heavy objects on or stand on the door
when it is open. The appliance could tip forward. When loading items to be
washed: 1) Locate sharp items so that they are not likely to
damage the door seal; 2) Warning: Knives and other utensils with sharp
points must be loaded in the basket with their points facing down or placed in
a horizontal position. Some dishwasher detergents are strongly alkaline. They
can be extremely dangerous if swallowed. Avoid contact with the skin and eyes
and keep children away from the dishwasher when the door is open. Check that
the detergent powder is empty after completion of the wash cycle.
5
Do not wash plastic items unless they are marked “dishwasher safe” or the
equivalent. For unmarked plastic items not so marked, check the manufacturer’s
recommendations. Use only detergent and rinse agents recommended for use in an
automatic dishwasher. Never use soap, laundry detergent, or hand washing
detergent in your dishwasher. The door should not be left open, since this
could increase the risk of tripping. If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard. During installation, the power supply must
not be excessively or dangerously bent or flattened. Do not tamper with
controls. The appliance needs to be connected to the main water valve using
new hose sets. Old sets should not be reused. To save energy, in stand by mode
, the appliance will switch off automatically while there is no any operation
in 30 minutes .
6
Disposal
For disposing of package and the appliance please go to a recycling center.
Therefore cut off the power supply cable and make the door closing device
unusable. Cardboard packaging is manufactured from recycled paper and should
be disposed in the waste paper collection for recycling. By ensuring this
product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city
office and your household waste disposal service. DISPOSAL: Do not dispose
this product as unsorted municipal waste. Collection of such waste separately
for special treatment is necessary.
7
PRODUCT OVERVIEW
IMPORTANT:
To get the best performance from your dishwasher, read all operating
instructions before using it for the first time.
Inner pipe Dispenser
Lower spray arm Filter assembly
Cutlery basket
Cup rack
upper spray arm
Upper basket
Lower basket
NOTE:
Pictures are only for reference, different models may be different. Please
prevail in kind.
8
USING YOUR DISHWASHER
Before using your dishwasher :
Inside
Outside
1. Loading the basket 2. Fill the rinse aid dispenser (Please check the section 1 of PART II) 3. Fill in detergent (Please check the section 1 of PART II)
Basket Used Tips
Adjusting teh upper basket
Type 1: The height of the upper basket can be easily adjusted to accommodate
taller dishes in either the upper or lower basket. To adjust the height of the
upper rack, follow these steps:
lower position 1 Pull out the upper basket.
2 Remove the upper basket.
3 Re-attach the upper basket to upper or lower rollers.
9
upper position 4 Push in the upper basket.
Type 2:
1 To raise the upper basket, just lift the upper basket at the center of each side until the basket locks into place in the upper position. It is not necessary to lift the adjuster handle.
2 To lower the upper basket, lift the adjust handles on each side to release the basket and lower it to the lower position.
Folding back the cup shelves
To make room for taller items in the upper basket, raise the cup rack upwards.
You can then lean the tall glasses against it. You can also remove it when it
is not required for use.
Folding back the rack shelves
The spikes of the lower basket are used for holding plates and a platter. They
can be lowered to make more room for large items.
raise upwards
fold backwards
10
MAINTENANCE AND CLEANING
External Care
The door and the door seal
Clean the door seals regularly with a soft damp cloth to remove food deposits.
When the dishwasher is being loaded, food and drink residues may drip onto the
sides of the dishwasher door. These surfaces are outside the wash cabinet and
are not accessed by water from the spray arms. Any deposits should be wiped
off before the door is closed.
The control panel
If cleaning is required, the control panel should be wiped with a soft damp
cloth only.
WARNING
To avoid penetration of water into the door lock and electrical components, do
not use a spray cleaner of any kind. Never use abrasive cleaners or scouring
pads on the outer surfaces because they may scratch the finish. Some paper
towels may also scratch or leave marks on the surface.
Internal Care
Filtering system
The filtering system in the base of the wash cabinet retains coarse debris
from the washing cycle. The collected coarse debris may cause the filters to
clog. Check the condition of the filters regularly and clean them if necessary
under running water. Follow the steps below to clean the filters in the wash
cabinet.
NOTE:
Pictures are only for reference, different models of the filtering system and
spray arms may be different.
11
Open
Coarse filter Main filter Fine filter
1 Hold the coarse filter and rotate it anticlockwise to unlock the filter. Lift the filter upwards and out of the dishwasher.
2 The fine filter can be pulled off the bottom of the filter assembly. The coarse filter can be detached from the main filter by gently squeezing the tabs at the top and pulling it away.
3 Larger food remnants can be cleaned by rinsing the filter under running water. For a more thorough clean, use a soft cleaning brush.
4 Reassemble the filters in the reverse order of the disassembly, replace the filter insert, and rotate clockwise to the close arrow.
WARNING
Do not over tighten the filters. Put the filters back in sequence securely,
otherwise coarse debris could get into the system and cause a blockage. Never
use the dishwasher without filters in place. Improper replacement of the
filter may reduce the performance level of the appliance and damage dishes and
utensils.
12
Spray arms
It is necessary to clean the spray arms regularly for hard water chemicals
will clog the spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
1 To remove the upper spray arm, hold the nut in the center still and rotate the spray arm counterclockwise to remove it.
2 To remove the lower spray arm, pull out the spray arm upward.
3 Wash the arms in soapy and warm water and use a soft brush to clean the
jets. Replace them after rinsing them thoroughly.
13
Caring For The Dishwasher
Frost precaution
Please take frost protection measures on the dishwasher in winter. Every time
after washing cycles, please operate as follows: 1. Cut off the electrical
power to the dishwasher at the supply source. 2. Turn off the water supply and
disconnect the water inlet pipe from the water valve. 3. Drain the water from
the inlet pipe and water valve. (Use a pan to gather the water) 4. Reconnect
the water inlet pipe to the water valve. 5. Remove the filter at the bottom of
the tub and use a sponge to soak up water in
the sump.
After every wash
After every wash, turn off the water supply to the appliance and leave the
door slightly open so that moisture and odors are not trapped inside.
Remove the plug
Before cleaning or performing maintenance, always remove the plug from the
socket.
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents
or abrasive cleaning products. Only use a cloth with warm soapy water. To
remove spots or stains from the surface of the interior, use a cloth dampened
with water an a little vinegar, or a cleaning product made specifically for
dishwashers.
When not in use for a longtime
It is recommend that you run a wash cycle with the dishwasher empty and then
remove the plug from the socket, turn off the water supply and leave the door
of the appliance slightly open. This will help the door seals to last longer
and prevent odors from forming within the appliance.
Moving the appliance
If the appliance must be moved, try to keep it in the vertical position. If
absolutely necessary, it can be positioned on its back.
Seals
One of the factors that cause odours to form in the dishwasher is food that
remains trapped in the seals. Periodic cleaning with a damp sponge will
prevent this from occurring.
14
INSTALLATION INSTRUCTION
WARNING Electrical Shock Hazard Disconnect electrical power before installing
dishwasher. Failure to do so could result in death or electrical shock.
Attention
The installation of the pipes and electrical equipments should be done by
professionals.
About Power Connection
WARNING For personal safety: Do not use an extension cord or an adapter plug
with this appliance. Do not, under any circumstances, cut or remove the
earthing connection from the power cord.
Electrical requirements
Please look at the rating label to know the rating voltage and connect the
dishwasher to the appropriate power supply. Use the required fuse 10A/13A/16A,
time delay fuse or circuit breaker recommended and provide separate circuit
serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power being corresponds to those on
the rating plate. Only insert the plug into an electrical socket which is
earthed properly. If the electrical socket to which the appliance must be
connected is not appropriate for the plug, replace the socket, rather than
using a adaptors or the like as they could cause overheating and burns.
Ensure that proper earthing exists before use
15
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to a threaded 3/4 inch connector and make
sure that it is fastened tightly in place. If the water pipes are new or have
not been used for an extended period of time, let the water run to make sure
that the water is clear. This precaution is needed to avoid the risk of the
water inlet to be blocked and damage the appliance.
ordinary supply hose
WARNING
A hose that attaches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has one, it is recommended that the
hose be disconnected and the hole plugged.
16
Connection Of Drain Hoses
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or
let it run into the sink, making sure to avoid bending or crimping it. The
height of drain pipe must be less than 1000mm. The free end of the hose must
not be immersed in water to avoid the back flow of it.
Please securely fix the drain hose in either position A or position B
Counter
MAX 1000mm
Back of dishwasher
A
Drain hose
B
Mains Cable
Water Inlet Drain Pipe
How to drain excess water from hoses
If the sink is 1000 higher from the floor, the excess water in hoses cannot be
drained directly into the sink. It will be necessary to drain excess water
from hoses into a bowl or suitable container that is held outside and lower
than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid
water leaks. Ensure that the water drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a similar drain hose. It
must be no longer than 4 meters; otherwise the cleaning effect of the
dishwasher could be reduced.
Syphon connection
The waste connection must be at a height less than 100 cm (maximum) from the
bottom of the dish. The water drain hose should be fixed .
17
Position The Appliance
Position the appliance in the desired location. The back should rest against
the wall behind it, and the sides, along the adjacent cabinets or walls. The
dishwasher is equipped with water supply and drain hoses that can be
positioned either to the right or the left sides to facilitate proper
installation.
Levelling the appliance
Once the appliance is positioned for levelling, the height of the dishwasher
may be altered via adjustment of the screwing level of the feet. In any case,
the appliance should not be inclined more than 2°.
NOTE:
Only apply to the free standing dishwasher.
Free Standing Installation
Fitting between existing carbinets
The height of the dishwasher, 845 mm, has been designed in order to allow the
machine to be fitted between existing cabinets of the same height in modern
fitted kitchens. The feet can be adjusted so that correct height is reached.
The laminated top of the machine does not require any particular care since it
is heatproof, scratchproof and stainproof.
18
Underneath existing work top
(When fitting beneath a work top) In most modern fitted kitchens there is only
one single work top under which cabinets and electrical appliances are fitted.
In this case remove the work top of the dishwasher by unscrewing the screws
under the rear edge of the top (a).
a a
b
b
Attention
After removing the work top, the screws must be screwed again under the rear
edge of the top (b).
The height will then be reduced to 815 mm, as scheduled by the International
Regulations (ISO) and the dishwasher will fit perfectly under the kitchen
working top
19
TROUBLESHOOTING TIPS
Before Calling For Service
Reviewing the charts on the following pages may save you from calling for
service.
Problem
Dishwasher doesn’t start
Possible Causes
Fuse blown, or the circuit break tripped.
Power supply is not turned on.
What To Do
Replace fuse or reset circuit breaker. Remove any other appliances sharing the
same circuit with the dishwasher.
Make sure the dishwasher is turned on and the door is closed securely. Make
sure the power cord is properly plugged into the wall socket.
Water pressure is low
Check that the water supply is connected properly and the water is turned on.
Door of dishwasher not properly closed.
Make sure to close the door properly and latch it.
Water not pumped form dishwasher
Twisted or trapped drain hose.
Filter clogged.
Check the drain hose. Check coarse the filter.
Kitchen sink clogged.
Check the kitchen sink to make sure it is draining well. If the problem is the kitchen sink that is not draining, you may need a plumber rather than a serviceman for dishwashers.
Suds in the tub
Wrong detergent.
Use only the special dishwasher detergent to avoid suds. If this occurs, open the dishwasher and let suds evaporate. Add 1 gallon of cold water to the bottom of the dishwasher. Close the dishwasher door, then select any cycle. Initially, the dishwasher will drain out the water. Open the door after draining stage is complete and check if the suds have disappeared. Repeat if necessary.
20
Problem
Stained tub interior
White film on inside surface
There are rust stains on cutlery
Knocking noise in the dishwasher Rattling noise in the dishwasher Knocking
noise in the water pipes
The dishes are not clean
Possible Causes Spilled rinse-aid.
Detergent with colourant may have been used. Hard water minerals.
The affected items are not corrosion resistant.
What To Do
Always wipe up rinse-aid spills immediately.
Make sure that the detergent has no colourant.
To clean the interior, use a damp sponge with dishwasher detergent and wear
rubber gloves. Never use any other cleaner than dishwasher detergent
otherwise, it may cause foaming or suds.
The items should be corrosion resistant.
A spray arm is knocking against an item in a basket
Interrupt the program and rearrange the items which are obstructing the spray arm.
Items of crockery are loose in the dishwasher.
Interrupt the program and rearrange the items of crockery.
This may be caused by on-site installation or the cross-section of the piping.
This has no influence on the dishwasher function. If in doubt, contact a qualified plumber.
The dishes were not loaded correctly.
The program was not powerful enough.
See notes in “Loading & unloading your dishwasher”.
Select a more intensive program.
21
Problem The dishes are not clean.
Cloudiness on glassware.
Black or grey marks on dishes Detergent left in dispenser The dishes aren’t
drying
Possible Causes
Not enough detergent was dispensed.
Items are blocking the movement of the spray arms.
What To Do
Use more detergent, or change your detergent.
Rearrange the items so that the spray can rotate freely.
The filter combination is not clean or is not correctly fitted in the base of wash cabinet. This may cause the spray arm jets to get blocked.
Clean and/or fit the filter correctly. Clean the spray arm jets.
Combination of soft water and too much detergent.
Use less detergent if you have soft water and select a shorter cycle to wash the glassware and to get them clean.
Aluminium utensils have rubbed against dishes
Dishes block detergent dispenser
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Improper loading Too little rinse-aid
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid dispenser.
Dishes are removed too soon
Do not empty your dishwasher immediately after washing. Open the door slightly so that the steam can come out. Take out the dishes until the inside temperature is safe to touch. Unload the lower basket first to prevent the dropping water from the upper basket.
22
Problem
The dishes aren’t drying
Possible Causes
Wrong program has been selected.
Use of cutlery with a low-quality coating.
What To Do
With a short program, the washing temperature is lower, decreasing cleaning
performance. Choose a program with a long washing time.
Water drainage is more difficult with these items. Cutlery or dishes of this
type are not suitable for washing in the dishwasher.
23
LOADING THE BASKETS ACCORDING TO AS/NZS 2007.1:
1.Upper basket:
1 2
3
1
1
2
1
1
3
1
1
Number 1 2 3
Item Cups Saucers Glasses
2.Lower basket:
6
5
6
4 6
6 7
Number 4 5 6 7
Item Dinner plates Soup plates Dessert dishes Cutlery basket
24
3.Cutlery basket:
21 2 11 1 21 2
4 44 44 4 4 44 44 4
212
1
5
252
2 12 111 2 12
33 3 333
5
55
5
33 3 333
555 5
55
1
2
3
4
5
Number 1 2 3 4 5
Item Forks Soup spoons Dessert spoons Teaspoons Knives
Information for comparability tests in accordance with (*AS/NZS 2007.1 ) Capacity: 12 place settings Position of the upper basket: lower position Program: ECO Rinse aid setting: 6 Detergent(Pre/main): 5/25g Door is open at the end of the drying cycle for the drying performance test (Door position: Open 50 mm)
25
DW269SS / DW269BP
Part II
USING YOUR DISHWASHER
4 6 9 10 11
12 PROGRAMMING THE DISHWASHER 12 Wash Cycle Table 13 Starting A Cycle Wash 13
Changing The Program Mid-cycle 14 Forget To Add A Dish?
15 ERROR CODES
16 TECHNICAL INFORMATION
NOTE:
QUICK USER GUIDE
Please read the corresponding content on the instruction manual for detailed
operating method.
1 Install the dishwasher (Please check the section 5 “INSTALLATION INSTRUCTION
”
of PART : Generic Version.)
2 Removing the larger residue on the cutlery
Inside
Outside
3 Loading the baskets
4 Filling the dispenser
5 Selecting a program and running the dishwasher
3
USING YOUR DISHWASHER
Control Panel
1
6
2
73
4 98 5
Operation (Button)
1
Press this button to turn on your dishwasher, the screen lights up.
2 Program
Press this button to select the appropriate washing program, corresponding indicator will be lit.
3 Delay 4 Option
Press the button to set the delay time. (3h/6h/9h)
Press the button to select a function, corresponding indicator will be lit.
5 Start / Pause
To start the selected washing program or pause it when the dishwasher is working.
4
Display
6 Program indicator
7 Delay time indicator
8 Warning indicator
9 Option indicator
Intensive For heaviest soiled crockery, such as pots, pans,casserole dishes
and dishes that have been sitting with dried food on them for a while.
Heavy For heavily soiled loads, such as pots, plates, glasses and lightly
soiled pans.
Normal For normally soiled loads, such as pots, plates, glasses and lightly
soiled pans, standard daily cycle. 90 mins For lightly soiled plates and pans
that need quick wash.
Rapid A shorter wash for lightly soiled loads that do not need drying. Glass
For lightly soiled crockery and glass.
To show the delay time. (3h/6h/9h)
Rinse Aid If the ” ” indicator is lit, it means the dishwasher is low on
dishwasher rinse aid and requires a reÿll.
Extra Drying To dry dishes more completely. ( It can only be used with
Intensive, Heavy, ECO, 90mins, Glass. )
Half load When you have about or less than 6 place setting dishware to wash,
you can choose this function to save energy and water. ( It can only be used
with Intensive, Heavy, ECO, 90mins, Glass. )
5
Preparing And Loading Dishes
Consider buying utensils which are identified as dishwasher-proof. For
particular items, select a program with the lowest possible temperature. To
prevent damage, do not take glass and cutlery out of the dishwasher
immediately after the program has ended.
For washing the following cutlery/dishes
Are not suitable Cutlery with wooden, horn china or mother-of-pearl handles
Plastic items that are not heat resistant Older cutlery with glued parts that
are not temperature resistant Bonded cutlery items or dishes Pewter or cooper
items Crystal glass Steel items subject to rusting Wooden platters Items made
from synthetic fibres
Are of limited suitability Some types of glasses can become dull after a large
number of washes Silver and aluminum parts have a tendency to discolour during
washing Glazed patterns may fade if machine washed frequently
Recommendations for loading the dishwasher
Scrape off any large amounts of leftover food. Soften remnants of burnt food
in pans.It is not necessary to rinse the dishes under running water. For best
performance of the dishwasher, follow these loading guidelines. (Features and
appearance of baskets and cutlery baskets may vary from your model.) Place
objects in the dishwasher in following way:
Items such as cups, glasses, pots/pans, etc. are faced downwards. Curved
items, or ones with recesses, should be loaded aslant so that water can run
off. All utensils are stacked securely and can not tip over. All utensils are
placed in the way that the spray arms can rotate freely during washing.
6
Load hollow items such as cups, glasses, pans etc. With the opening facing
downwards so that water cannot collect in the container or a deep base. Dishes
and items of cutlery must not lie inside one another, or cover each other. To
avoid damage, glasses should not touch one another. The upper basket is
designed to hold more delicate and lighter dishware such as glasses, coffee
and tea cups. Long bladed knives stored in an upright position are a potential
hazard! Long and / or sharp items of cutlery such as carving knives must be
positioned horizontally in the upper basket. Please do not overload your
dishwasher. This is important for good results and for reasonable consumption
of energy.
NOTE:
Very small items should not be washed in the dishwasher as they could easily
fall out of the basket.
Removing the dishes
To prevent water dripping from the upper basket into the lower basket, we
recommend that you empty the lower basket first, followed by the upper basket.
WARNING
Items will be hot! To prevent damage, do not take glass and cutlery out of the
dishwasher for around 15 minutes after the program has ended.
7
Loading the upper basket
The upper basket is designed to hold more delicate and lighter dishware such
as glasses, coffee and tea cups and saucers, as well as plates, small bowls
and shallow pans (as long as they are not too dirty).Position the dishes and
cookware so that they will not get moved by the spray of water.
Loading the lower basket
We suggest that you place large items and the most difficult to clean items
are to be placed into the lower basket: such as pots, pans, lids, serving
dishes and bowls, as shown in the figure below. It is preferable to place
serving dishes and lids on the side of the racks in order to avoid blocking
the rotation of the top spray arm. The maximum diameter advised for plates in
front of the detergent dispenser is of 19 cm, this not to hamper the opening
of it.
Loading the cutlery basket
Cutlery should be placed in the cutlery rack separatelyfrom each other in the
appropriate positions, and do make sure the utensils do not nest together,
this may cause bad performance.
WARNING Do not let any item extend through the bottom. Always load sharp
utensils with the sharp point down!
For the best washing effect, please load the baskets refer to standard loading
options on last section of PART : Generic Version
8
Function Of The Rinse Aid And Detergent
The rinse aid is released during the final rinse to prevent water from forming
droplets on your dishes, which can leave spots and streaks. It also improves
drying by allowing water to roll off the dishes. Your dishwasher is designed
to use liquid rinse aids.
WARNING
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser
with any other substances (e.g. Dishwasher cleaning agent, liquid detergent).
This would damage the appliance.
When to refill the rinse aid dispenser
Unless the rinse-aid warning light (
) on the control panel is on, you can always
estimate the amount from the color of the optical level indicator located next to the
cap. When the rinse-aid container is full, the indicator will be fully dark. The size of the
dark dot decreases as the rinse-aid diminishes. You should never let the rinse aid level
be less than 1/4 full.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator
changes, as illustrated below.
Full
3/4 full
1/2 full
1/4 full
Empty
Function of detergent
The chemical ingredients that compose the detergent are necessary to remove,
crush and dispense all dirt out of the dishwasher. Most of the commercial
quality detergents are suitable for this purpose.
WARNING
Proper Use of Detergent Use only detergent specifically made for dishwashers
use. Keep your detergent fresh and dry. Don’t put powdered detergent into the
dispenser until you are ready to wash dishes.
Dishwasher detergent is corrosive!Keep dishwasher detergent out of the reach
of children.
9
Filling The Rinse Aid Reservoir
Rinse-Aid indicator
1 To open the dispenser, turn the cap to the “open” (left) arrow and lift it out.
2 Carefully pour in the rinse-aid into its dispenser, whilst avoiding it to
overflow.
NOTE:
Clean up any spilled rinse aid with an absorbent cloth to avoid excessive
foaming during the next wash.
3 Replace the cap by inserting it aligned with “open” arrow and turning it to
the closed (right) arrow.
Adjusting the rinse aid reservoir
Adjust lever(Rinse)
Turn the rinse aid indicator dial to a number between 1 and 6. The higher the number, the more rinse aid the dishwasher uses. If the dishes are not drying properly or are spotted, adjust the dial to the next higher number until your dishes are spot-free. Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or knife blades.
10
Filling The Detergent Dispenser
Push latch to open
AB
1 Press the release catch on the detergent dispenser to open the cover.
2 Add detergent into the larger cavity (A) for the main wash cycle . For more heavily soiled wash loads, also add some detergent into the smaller cavity (B) for the pre-wash cycle .
3 Close the cover and press on it until it locks into place.
NOTE:
Be aware that depending on the soiling of water, setting may be different.
Please observe the manufacturer’s recommendations on the detergent packaging.
11
PROGRAMMING THE DISHWASHER
Wash Cycle Table
The table below shows which programs are best for the levels of food residue
on them and how much detergent is needed. It also show various information
about the programs. ( )Means: need to fill rinse into the Rinse-Aid Dispenser.
Program
Description Of Cycle
Detergent Pre/Main
Intensive
Pre-wash(50) Wash(60) Rinse Rinse Rinse(65) Drying
Heavy
Pre-wash(45) Wash(55) Rinse Rinse(65) Drying
Normal
(*AS/NZS 2007.1)
Pre-wash Wash(45) Rinse(50) Drying
5/25g
(Or all in 1)
5/25g
(Or all in 1)
5/25g
(Or all in 1)
90 mins Rapid Glass
Wash(65) Rinse Rinse(65) Drying
Wash(40) Rinse Rinse(45)
Pre-wash Wash(42) Rinse Rinse(60) Drying
30g
(Or all in 1)
25g
5/25g
(Or all in 1)
Running Time(min)
Energy (kWh)
170
1.6
160
1.4
170
0.71
90
1.2
30
0.6
125
0.9
Water (L) 18.5
15 10.5 11.5 11.5 14.5
Rinse Aid
12
NOTE:
AS/NZS 2007.1: This program is the test cycle. The information for
comparability test in accordance with AS/NZS 2007.1.
Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent. 3. Insert the plug into the socket. The power
supply refer to last page”Product fiche”.
Make sure that the water supply is turned on to full pressure. 4. Close the
door, press the Power button, to switch on the machine. 5. Choose a program,
the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time
otherwise, the detergent may have already been released and the dishwasher may
have already drained the wash water. If this is the case, the dishwasher needs
to be reset and the detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below: 1. Press the Start/Pause button to
pause the washing. 2. Press Program button for more than 3 seconds – the
program will cancel. 3. Press the Program button to select the desired
program. 4. Press the Start/Pause button, after 10 seconds, the dishwasher
will start.
3 sec
Intensive Heavy ECO
13
Forget To Add A Dish?
A forgotten dish can be added any time before the detergent dispenser opens.
If this is the case, follow the instructions below: 1. Press the Start/Pause
button to pause the washing. 2. Wait 5 seconds then open the door. 3. Add the
forgotten dishes. 4. Close the door. 5. Press the Start/Pause button after 10
seconds, the dishwasher will start.
After 5 sec
WARNING It is dangerous to open the door mid-cycle, as hot steam may scald
you.
14
ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
Codes
Meanings
Possible Causes
The Glass light flicker fleetly
Longer inlet time.
Faucets is not opened, or water intake is restricted, or water pressure is too low.
The Rapid, Glass light flicker fleetly
Not reaching required temperature.
Malfunction of heating element.
The 90 mins light flicker fleetly
Overflow.
Some element of dishwasher leaks.
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
15
TECHNICAL INFORMATION
D1
W
H
D2
Height (H) Width (W) Depth (D1) Depth (D2)
845mm 598mm 604mm (with the door closed) 1175mm (with the door opened 90°)
16
Product information
Manufacturer Type / Description Standard place settings Energy efficiency
class Water consumption class Standard cleaning cycle Energy consumption of
the standard cleaning cycle Water consumption of the standard cleaning cycle
Program duration of the standard cleaning cycle Noise level Mounting Could be
built-in Power consumption Rated voltage / frequency Water pressure (flow
pressure)
DiLusso DW269SS / DW269BP 12
3 4.5 Normal 0.71 kWh 10.5 liter 170 min 49 dB(A) re 1 pW Free standing YES
1760-2100W AC 220-240V/50Hz 0.04-1.0MPa=0.4-10 bar
17
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>