Smania Pet Drinking Fountain Flowy Instructions
- June 12, 2024
- SMANIA
Table of Contents
Smania Pet Drinking Fountain Flowy Instructions
PACKAGE CONTENTS
- Fountain
- Pump
- Power adapter
- Outflow pipe
- 4 × water filter
- Sensor (optional)
TECHNICAL SPECIFICATIONS
- Volume: 1,8 L
- Material: PC
- Dimensions: 172 × 172 × 165 mm
- Weight: 0,6 kg
INSTALLATION
Before installation
- Take out all the packaging and items from the inside of the fountain.
Installing the filter
- Open the fountain and remove the filter compartment on the fountain’s cover.
- Insert one of the included filters into the filter compartment.
- Close the compartment.
Installing the water pump
- Place the water pump inside the fountain near the specified cable slot. Press it down to make it stick to the casing.
- Thread the cable through the slot.
- Use the slider on the water pump to determine the water flow (it’s marked with + and -).
Assembling the fountain
- When you have completed the above steps, place the cover on the tank. Ensure that the water pipe slots onto the pump’s outlet and that the cable slots align.
- Insert the included pipe into the outlet on top of the cover if you wish to have the water flow from a higher place.
Operation
- Connect the pump’s power cable to the power adapter and plug it into an electrical socket. The fountain should now start pumping water.
- If your version of the fountain comes with the motion sensor, refer to the next section.
Motion sensor operation
- If you have the version of the fountain with the motion sensor, plug the pump’s power cable into the sensor.
- Attach the sensor close to the water fountain with the suction cup (there is a slot for the suction cup on the back of the sensor) or the included double-sided adhesive dot.
- The sensor turns ON the water pump when it senses motion in a range of 0,1–3 m. It turns OFF again after 30 seconds.
MAINTENANCE
- Clean the water container every two weeks, increasing the frequency depending on the water quality and the animal’s habits. When cleaning the container, also replace the water filter.
- Always unplug the water pump during maintenance.
- Use regular running water to clean the water tank. Do not use soap or detergents of any kind in order to protect your pet’s health.
- Do not use abrasive materials when cleaning.
WARNINGS
- Always unplug the water pump during maintenance.
- Do not pull on the cord when unplugging the fountain.
- Do not overfill. Use the markings on the side of the water tank to determine the optimal water level.
- Never run the water pump outside of the water. Always fill the tank before turning on the pump.
- Protect your pet from chewing the cords.
- The power adapter shouldn’t come into contact with water.
WARRANTY
The warranty is valid for 24 months. You can claim it from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš, Slovenia, for a replacement product or a refund. Send us your order number and purchase date in the email, which is available by clicking on our logo in the bottom right corner. The product has a lifetime of 24 months from the date of collection.
WEEE disposal and recycling symbol. The WEEE symbol is attached to the product in compliance with the EU directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). It is intended to deter the improper disposal of this product and to promote reuse and recycling.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>