sanag Z36S Pro True Wireless Stereo Earphone User Guide

Sanag Z36S Pro True Wireless Stereo Earphone

Product Information

Product Usage Instructions

1. Power on: To power on the earphones, open the charging box cover and they will automatically turn on and enter a pairing state. Alternatively, manually start the earphones by pressing and holding the MFB touch key for about 3 seconds. The white and blue light will flash quickly and then turn off after connecting.
2. Shut down: To shut down the earphones put them into the charging box and close the cover. They will automatically shut down and disconnect. Alternatively, manually turn off the earphones by pressing the MFB key for about 7 seconds when pausing playback. The white and blue light will flash three times and then turn off.
3. Pairing status: The earphones will automatically enter pairing status after being turned on. When pairing is successful, the white and blue lights in the main ear will flash alternately, and the auxiliary ear will not light up.
4. Pair the headset with the mobile phone: After successfully connecting the left and right headphones, open the Bluetooth settings on your mobile phone and find the device name in the Bluetooth list. Click on the device name to connect, and the connection success light will turn off.
5. Disconnect: To disconnect the headset, either remove it from the Bluetooth list of your mobile phone or turn off the Bluetooth function on your mobile phone. The white and blue lights in the main ear will flash alternately, and the auxiliary ear will not light up.
6. Play/Pause: Click the MFB touch keys on the left and right ears to play or pause audio.
7. Volume+: Triple-click the MFB touch button on the left ear to increase the volume.
8. Volume-: Triple-click the MFB touch button on the right ear to decrease the volume.
9. Previous song: Double-click the MFB touch key on the left ear to play the previous song.
10. Next song: Double-click the MFB touch key on the right ear to play the next song.
11. Answer incoming calls: When receiving a call,\ click the MFB touch button on the left or right ear to answer.
12. Hang up the phone: During a call, double-click the MFB touch button on the left or right ear to hang up.
13. Refuse to answer: When receiving a call, press and hold the MFB touch button for 2 seconds at any time to refuse the call.
14. Start the voice assistant: Press and hold the MFB touch key for about 3 seconds to activate the voice assistant. Click to exit.
15. Hall function: When charging the headset, put it into the charging box and close the cover. The indicator light for charging the headset will turn on and the blue light will remain on. When the earphone is fully charged, the box will turn off and the earphone will also turn off.
16. Pairing timeout: If the phone is turned on but not connected, it will automatically turn off after 5 minutes.
17. Reset the headset: If the phone is not connected when turned on, press the MFB button on the left and right ears to reset the headset to its factory settings. The white and blue light will turn on for 2 seconds after a successful reset.

Product Overview

1. Headphone MFB key
2. Speaker outlet
3. Charging contact
4. LED light
5. Type-C charging port
6. Charging chamber indicator

Headphone function operation instructions

Headphone MFB key

•  Power on: automatically power on, turn on the earphones on both sides of the charging box cover and enter the pairing state automatically. Start the machine manually, press and hold the MFB touch key for about 3 seconds. The white and blue light flashes quickly and goes out after connecting.
• Shut down: automatically shut down, put the headset into the charging box and close the cover to enter the charging state, automatically shut down and disconnect. Turn off the machine manually, and press the MFB key for about 7 seconds when pausing playback. The white and blue light will flash three times and then go out.
• Pairing status: The headset will automatically enter the pairing status after it is turned on. Pairing is successful, the white and blue lights in the main ear flash alternately, and the auxiliary ear does not light.
• Pair the headset with the mobile phone: When the left and right headphones are connected successfully, open the mobile phone Bluetooth and find the device name in the Bluetooth list. Click Connect, and the connection success light goes out.
• Disconnect: disconnect the headset from the Bluetooth list of the mobile phone or turn off the Bluetooth function of the mobile phone. The white and blue lights in the main ear flash alternately, and the auxiliary ear does not light up.
• Play/Pause: Click the MFB touch keys on the left and right ears.
• Volume+: triple-click the MFB touch button on the left ear.
• Volume -: Three clicks on the MFB touch button on the right ear.
• Previous song: Double-click the MFB touch key on the left ear.
• Next song: Double-click the MFB touch key on the right ear.
• Answer the incoming call: When calling, click the MFB touch button on the left and right ears.
• Hang up the phone: During the call, double-click the MFB touch button on the left and right ears.
• Refuse to answer: When calling, press and hold the MFB touch button for 2 seconds at any time.
• Start the voice assistant: press and hold the MFB touch key for about 3 seconds to enter the voice assistant, and click to exit.
• Hall function: When charging the headset, put it into the charging bin, close the charging bin cover box, and the indicator light for charging the headset is on, and the blue light is always on. The earphone is full, the box is off, and the earphone is off.
• Pairing timeout: When the phone is turned on and not connected, it will automatically turn off after 5 minutes.
• Reset the headset: When the phone is not connected when the phone is turned on, press the MFB button on the left and right ears to reset the factory settings of the headset. The white and blue light will turn on for 2 seconds after the reset is successful.

Bluetooth pairing

1. Open the charging bin, and the headset will start automatically; Please connect the Bluetooth headset and mobile phone (or other connecting devices) The distance is within the range of 50CM, the closer the better.
2. Open the Bluetooth interface of the mobile phone, search for “sang Z36S Pro”, and click Pair to connect the device.

Specifications

• Name: Wireless Bluetooth headset
• Modelsanag Z36S Pro
• Connection range: ≥ 10m
• Bluetooth version: V 5.3
• Headphone battery capacity: 35mAh
• The battery capacity of the charging bin: 250mAh
• Charging time: about 1 hour
• matters needing attention
• Do not use abrasive cleaners to clean this product.
• Do not allow this product to be heated or close to fire sources, such as cooking stoves.
• Do not expose this product to direct sunlight for a long time.
• Do not dispose of this product in the fire to avoid an explosion.
• Do not attempt to disassemble this product to make any modifications, as it does not contain any repair components.
• Do not use this product in the rain.
• If you do not intend to use this product for a long time, please store it in a dry environment and charge the headset at least once a month to prolong its life and avoid extreme temperatures and dust.
  FCC ID: 2A6MSZ36SPRO

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>