Honeywell Thor CV31 Series User Guide
- June 3, 2024
- Honeywell
Table of Contents
Honeywell Thor CV31 Series
Thor CV31 Series Configuration Guide
What are the options available on the CV31?
Thor CV31 Configuration Map
Thor CV31 Forklift Install
Thor CV31 Forklift Install
Thor CV31 Forklift Install with Tethered Scanner – Freezer Environment
-30°C
Thor CV31 Desktop Installation / Developer Setup
Migrating from a CV30 to Thor CV31
For migrating an existing CV30 installation to Thor CV31, most accessories can
be re-used with the Thor CV31.
If using the existing CV30 power supply installation, the VE027-8024-C0
adapter cable is required to power the Thor CV31.
Thor CV31 1/0 Connectors
Scanner & Accessories Options
Miscellaneous Accessories
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specification and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does not
represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting the
furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language with-out prior written consent
of HII.
Web Address: www.honeywellaidc.com
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A and licensed
to Honeywell.
Other product names mentioned in the manual may be trademarks of registered
trademarks of their respective companies and are the property of their
respective owners.
© 2014 Honeywell International Inc. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>