TELEFUNKEN Elektroakustik M80 Dynamic Series Microphones Instruction Manual

TELEFUNKEN Elektroakustik M80 Dynamic Series Microphones

Product Usage Instructions

Low Profile (-SH) Models (M80-SH & M81-SH)

• The smaller footprint of the M80-SH & M81-SH makes them ideal for tight-fit applications including drums and guitar amps on stage, as well as vocal positions for drummers and keyboard players, where a full-size microphone may be too obstructive.
• Both models are sonically identical to their handheld versions.
• Both the M80-SH & M81-SH come with drum mounts and a TELEFUNKEN right-angle XLR cable.

Wireless (-WH) Model (M80-WH)

• The wireless version of the M80 is designed for added convenience in live performances or studio settings.
• With a compact size and wireless capabilities, the M80-WH offers flexibility without compromising on sound quality.

FAQ

• Q: Are additional accessories available for purchase?
• A: Yes, additional accessories can be purchased through the TELEFUNKEN Elektroakustik website at www.t-funk.com/shop.
• Q: What are the specific strengths of each model in the Dynamic Series?
• A: Each model in the Dynamic Series has unique strengths tailored for different applications. The M80 offers condenser-like extended high end, the M81 provides a flat frequency response and exceptional midrange, and the M82 excels in low-frequency capabilities. These attributes allow for a cohesive sound in various multi-microphone setups such as drum sets, vocal groups, and horn sections.

Series Overview

• Designed and assembled in TELEFUNKEN’s American facility, the Dynamic Series microphone models are modern staples in live sound reinforcement and studio recording. Their unmatched sonic performance is mated with intelligent internal construction to provide low handling noise and trustworthy durability.
• Each model has its specific strengths to not only meet the various demands of live sound and studio recording, but also complement the other microphone models in the Series; whether it’s the M80’s condenser-like extended high end, the M81’s flat frequency response and exceptional midrange, or the M82’s superb low-frequency capabilities. These tailored attributes allow for a cohesive sound in multi-microphone applications, such as drum sets, vocal groups, and horn sections.
• The M80 and M81 are available in handheld, low-profile, and wireless configurations, as well as in a variety of colour and finish combinations through our Custom Shop. The M82, a large diaphragm dynamic with on-board equalizer switches, excels in both music and broadcast voice applications. All three models are featured in the TELEFUNKEN Drum Packs.

Included Accessories

M80

Over the last decade, the M80 has become a staple in live sound reinforcement and studio recording. Its wide frequency response, condenser-like performance, and high SPL capabilities allow the M80 to capture the full range of any sound source, making it a reliable first choice for many sources including lead vocals and snare drum. Featuring a custom-wound impedance matching transformer, its unmatched performance is mated with intelligent internal construction to provide low handling noise.
Hand-assembled in the USA, the M80’s rugged build quality is designed to withstand the wear and tear of the road.

Technical Specifications

• Polar Pattern: Supercardioid
• Frequency Range: 50 Hz – 18 kHz, ± 3dB
• Capsule: 25 mm, Dynamic Moving Coil
• Transformer: T80
• Sensitivity: 1.54 mV/Pa
• Output Impedance: 325 Ω
• Maximum SPL (for 1% THD): 135 dB
• Dimensions: 184 mm x 48 mm
• Weight: 430 g

M81

The M81 is a proven choice for countless sound sources both in the studio and on the stage. It possesses the same condenser-like response, minimal proximity effect, and superior feedback rejection one expects from a TELEFUNKEN Dynamic Series microphone. A smooth frequency response, clarity, and wealth of body make the M81 an ideal tool for taming brighter vocals, and guitar tones and fattening up toms, horns, or other thinner-sounding sources. Built around a low-mass diaphragm designed to reduce proximity effect and a custom-wound impedance matching transformer, the M81 features intelligent design and American-assembled construction, making it an excellent first-choice dynamic for most situations.

Technical Specifications

• Polar Pattern: Supercardioid
• Frequency Range: 50 Hz – 18 kHz, ± 3dB
• Capsule: 25 mm, Dynamic Moving Coil
• Transformer: T80
• Sensitivity: 1.54 mV/Pa
• Output Impedance: 325 Ω
• Maximum SPL (for 1% THD): 135 dB
• Dimensions: 184 mm x 48 mm
• Weight: 430 g

Low Profile (-SH)

The smaller footprint of the M80-SH & M81-SH makes them ideal for tight-fit applications including drums and guitar amps on stage, as well as vocal positions for drummers and keyboard players, where a full-size microphone may be too obstructive. Both models are sonically identical to their handheld versions. Both the M80-SH & M81-SH come with drum mounts and a TELEFUNKEN right-angle XLR cable.

Technical Specifications

• Polar Pattern: Supercardioid
• Frequency Range: 50 Hz – 18 kHz, ± 3dB
• Capsule: 25 mm, Dynamic Moving Coil
• Transformer: T80
• Sensitivity: 1.54 mV/Pa
• Output Impedance: 325 Ω
• Maximum SPL (for 1% THD): 135 dB
• Dimensions: 125 mm x 48 mm
• Weight: 340 g

Wireless (-WH)

M80-WH & M81-WH wireless capsule heads are designed to deliver the same character and high SPL handling as their handheld versions, whether it’s the M80’s natural, condenser-like response with a subtle high-frequency rise, or the M81’s smooth frequency response and exceptional midrange articulation. They are compatible with the following industry-standard wireless transmitters: Shure® – Axient, UHF-R, QLXD, ULXD, ULX, PG, PGX, SLX, SLXD & UR2. Lectrosonics® – HH & HHa. Sony® – UTX-M03.

Technical Specifications

• Polar Pattern: Supercardioid
• Frequency Range: 50 Hz – 18 kHz, ± 3dB
• Capsule: 25 mm, Dynamic Moving Coil
• Transformer: T80
• Sensitivity: 1.54 mV/Pa
• Output Impedance: 325 Ω
• Maximum SPL (for 1% THD): 135 dB
• Dimensions: 95 mm x 48 mm
• Weight: 162 g

M82

The M82 is a robust, end-address microphone that features a large dynamic diaphragm with superb low-frequency capabilities. Though it was designed to capture fat and punchy kick drum tones, the two on-board EQ switches make the M82 equally suited for a multitude of sources including vocals, percussion, guitar and bass amplifiers, organ, and brass instruments. Both the KICK EQ and HIGH BOOST switches function independently and give the user the ability to tailor the microphone’s response to the source with ease. The M82 is hand- assembled and tested in our American facility.

Technical Specifications

• Polar Pattern: Cardioid
• Frequency Range: 25 Hz – 18 kHz, ± 3 dB
• Kick EQ: -6 dB at 350 Hz
• High Boost: +6 dB at 6 kHz to 10 kHz
• Capsule: 32 mm, Dynamic Moving Coil
• Sensitivity: 1.85 mV/Pa
• Output Impedance: 250 Ω
• Maximum SPL (for 1% THD): 146 dB
• Dimensions: 155 mm L x 63 mm Dia
• Weight: 434 g

M82 EQ Switch Function

• The M82 is designed with a built-in switchable two-band equalizer.
• This gives the user four distinct EQ curves to select the ideal response for the sound source.

KICK EQ is a low midrange notch filter that provides a 6 dB band cut at 350 Hz, which removes the boxy character of the kick drum and adds definition. Though this was designed for kick drums, this EQ also caters to bass amps or any source in need of clearing up the low midrange.
HIGH BOOST is a high-frequency boost. This engages a slow rising shelf on the frequency response starting around 2 kHz and opens up the capsule’s top end 6 dB at 10 kHz. This is great for adding a high-end presence on your source.

Recommended EQ Settings

Setting 1

• KICK EQ – OFF, HIGH BOOST – OFF Vocals
• Clean electric guitar
• Brass & woodwind

Setting 2

• KICK EQ – OFF, HIGH BOOST – ON
• Broadcast voice
• Distorted guitar amps
• Mallet-based percussion

Setting 3

• KICK EQ – ON, HIGH BOOST – OFF
• Vintage kick drum sound Bass cab
• Organ Leslie cabinet bottom

Setting 4

• KICK EQ – ON, HIGH BOOST – ON
• Modern kick drum sound
• Floor and rack toms
• Kick drum with resonant head

Custom Shop Configurator

By using the Custom Shop Configurator found on our webstore, you can choose from an assortment of solid colour, wood, and metal finishes to find the perfect head grille and body combination to fit your unique style. Only M80, M81, M80-WH, and M81-WH are available for customization. Create your custom dynamic microphone at www.t-funk.com/our-shop/custom-shop- configurator.

Drum Packs

TELEFUNKEN Elektroakustik Drum Packs include everything you need to take your drum recording and live sound reinforcement to the next level. All four packs include drum mounts and a 5-meter XLR cable with a right-angle connector for each microphone, all loaded in a road-ready hardshell case. Every set includes an M82 for kick, M80-SH for snare, and M81-SH for toms. The DC6 and DC7 also include a matched pair of M60 FET condenser microphones for overheads. For more information on the M60 FET, visit www.t-funk.com.

Dynamic Frequency Comparison

The M80 and M81 are both designed around the same diaphragm and output transformer but each has been tailored to have specific sonic attributes. The M80 features a pronounced, extended high-frequency response and the M81 features a much more neutral, flatter response with increased midrange clarity. There are plenty of applications where either model would be sufficient, but their strengths lend them to capturing certain specific sources. Some recommendations are listed below:

Recommended Applications

M80

• Vocals
• Snare
• Percussion
• Clean Guitar Amps

M81

• Toms
• Distorted Guitar Amps
• Female Vocals
• Brass

XLR Connector Set Screw Repair and Replacement

The M80, M81, and M82 current production units feature a recessed set screw in the XLR connector that holds the connector in place inside the mic body. If the XLR connector becomes loose or has fallen out of position, it can be reset easily.

1. If the connector has pulled out of the bottom of the microphone, confirm the wiring has not been damaged.
   There should be two wires from the microphone connected to the XLR connector. If either wire is disconnected or damaged, contact [email protected].

2. Slide the XLR connector into the bottom opening and position it so the set screw lines up with the thru hole on the mic body.

3. Using a small flathead screwdriver, turn the screw counterclockwise so the set screw head moves upward into the mic body thru the hole.

4. Make sure to fully tighten. The XLR connector should now be secured in place.

• For more information follow the QR code.

Warranty

• TELEFUNKEN Elektroakustik warrants that any capsules used in their microphones are free from defects in material and workmanship for ninety (90) days from the original date of purchase, and agree to replace any capsule which, under normal installation and use, disclose such defect. This is provided that the complete microphone is delivered to TELEFUNKEN Elektroakustik intact for examination and provided that such examination discloses, in the judgment of TELEFUNKEN Elektroakustik, that the capsule is indeed defective.
• Upon replacement, TELEFUNKEN Elektroakustik will provide an additional 90-day limited warranty on the new capsule.
• This warranty does not extend to any capsule that appears to have been misused, altered, neglected, damaged, or stored in any manner that adversely affects it, or used in violation of instructions furnished by us.
• This limited warranty shall be void and of no further force or effect whatsoever if the microphone is repaired or modified by any person other than an authorized representative of TELEFUNKEN Elektroakustik. This warranty shall not apply to any defect, failure, or damage caused in whole or in part from attempts by personnel other than TELEFUNKEN Elektroakustik to open, repair, or service the microphone; nor to damage to a unit that has been modified by persons other than TELEFUNKEN Elektroakustik personnel.

In compliance with the following requirements

• EMC Directive: 2014/30/EU (EN 55013 applied)
• RoHS2 Directive: 2011/65/EU

Product Registration

• All TELEFUNKEN Elektroakustik customers are encouraged to register recently purchased NEW or USED products. All warranties on Dynamic Series products are fully transferable between owners for the length specified for each series starting from the date the microphone was purchased as new.
• Microphones come with a 90-day warranty for capsules and tubes. A one-year warranty covers parts and labour on the amplifier as well as the power supply. Upon registering your new products, the warranty will be increased to one-year parts and labor for the capsule and tube, and four years for the amplifier and power supply.
• To register your warranty, please head to www.t-funk.com/warranty to fill out the Product & Warranty Registration form.

Repairs & Service

• Repairs on new TELEFUNKEN Elektroakustik microphones are covered under a limited warranty plan and repair costs will be determined based on the date of purchase and the date in which the warranty was registered.
• Repairs & Services covered under the warranty plan are done at no charge for labour, parts and service.
• Please visit www.t-funk.com/repairs for more information on repairing your TELEFUNKEN microphone.

CONTACT

• www.t-funk.com
• 300 Pleasant Valley Rd, Suite C
• South Windsor, CT 06074
• +1.860.882.5919

References

• Home - Telefunken Elektroakustik
• Microphone Repairs - Telefunken Elektroakustik
• Shop - Telefunken Elektroakustik
• Warranty Registration - Telefunken Elektroakustik

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>