mesko MS 6021 Electric Oven User Manual
- June 6, 2024
- mesko
Table of Contents
mesko MS 6021 Electric Oven User Manual
MS 6021
SAFETY INFORMATION
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Do not allow moisture to the motor unit.
- If it is necessary to use an extension cord, use only a grounding pin and adapted to a current of min 10 A. The other extension cords may overheat. The cable must be positioned so as to avoid accidental strokes or stumbles on him.
- The oven should be put on a flat, temperature resistant surface away from flammable materials (curtains, drapes, wallpaper, etc.). In order to ensure proper air circulation there should be at least 10 cm of free space on each side of the unit and at least 30 cm above the oven. Do not cover the ventilation holes of the oven, as this may cause overheating and damage.
- Do not use the oven with the door open. Do not cover the machine during operation, nor put any items.
- Do not touch the hot surfaces of the oven (door, top or bottom wall and side walls). Use protective gloves to remove or touch any hot parts.
- During operation, door glass becomes extremely hot. It must not be heavily hit, or pour cold water because of the risk of its crack.
- The power cord can be installed over an oven, and should not touch or be near hot surfaces. Do not place the oven under the electrical outlet.
- Due to the high temperature keep special carefulness when removing tray or grate (or other accessories approved for use in ovens) with baked dishes. Please be careful, when removing the tray or hot oil or other hot liquids. Use dedicated accessories offered with the oven or heat-resistant oven gloves.
- Oversized food must not be inserted, as this may cause fire and damage the appliance.
- Do not place any cardboard, paper, plastics and other flammable or easily melt objects in the oven.
- Do not store any other accessories in the appliance.
- After cooking and before cleaning the machine, unplug the power cord from the outlet and leave to cool. Wait a long period of time because the heated oven cools very slowly.
- Clean the device after each use.
- Do not use corrosive detergents such as emulsions, creams, pastes, etc. to clean the casing. They can wipe off the graphic signs on the surface such as scales, marks, warning signs etc.
- Do not wash metal parts in the dishwasher, as the corrosive detergents used in these devices cause darkening of the above parts. It is recommended to wash them by hand, using traditional dishwashing liquids.
- To avoid overheating of the oven the crumb tray or any other part of the oven should not be cover with a metal foil.
- Do not use metal scouring pads to clean. Broken metal pieces may come into contact with electrical parts, creating a risk of electric shock.
DESCRIPTION:
- A Housing
- B Baking tray
- C Heating mode selection knob
- D Indicator light
- E Timer control knob
- F Handle
- G Wire rack
- H Temperature adjustment knob
- I. Spit removal handle
BEFORE SWITCHING ON
Before first use, remove all packaging components.
- Make sure the oven is placed on high-temperature resistant base
- Make sure there Is enough ventilation space around oven (minimum 10 cm on each side and 30 cm above the oven)
- Make sure the oven is dry
USING THE MACHINE:
Before the first use it is recommended to run the oven for approx. 15 min. This removes the protective substance, which has been pre-coated heating elements. This may result in generating of small amounts of smoke. Make sure the room is ventilated.
- Set temperature adjustment knob (H) to the desired value.
- Set the heating mode selection dial ( C ) in position: a) upper b) lower c) both upper and lower.
- Set the timer (E) to the requested time. The requested cooking time is signaled by an audible signal. During the cooking process the thermostat indicator light (D) will turn on and off – the thermostat maintains the proper temperature heating panels.
- It is recommended to pre-heat the oven for evenly roasted dishes.
- To turn off the device, turn the knob ( C ) to “OFF”.
END OF USE OF THE OVEN:
- Turn off the machine by setting the knob (C) to “OFF”. Allow to cool.
- Disconnect the device from the network by unplugging the power cord from the socket.
CLEANING AND MAINTENANCE:
- Before cleaning the oven switch off the appliance and leave to cool.
- Disconnect the device from the network by unplugging the power cord from the wall outlet.
- Do not immerse the oven in water.
- The housing with a damp cloth, then wipe dry.
- The tray, grill washed in water with dishwashing liquid. Wipe with a dry cloth.
- Clean the glass door with a damp cloth or sponge soaked in water with dishwashing liquid. Then wipe dry.
- Do not use sharp metal tools when cleaning any residue baked products.
TECHNICAL DATA:
- Power supply: 220-240V ~50/60Hz
- Timer: 60 min.
- Power Non.: 2200W
- Power Max.: 3000W Capacity: 66 L
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags
(PE) into the plastic container Worn device should be returned to the
appropriate point storage because it is dangerous in the device ingredients
may pose a threat to the environment. The electrical device should be handed
over to limit
its reuse and use. If in the device there are batteries you have to take out
and give to the point stored separately.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>