delta BH1000 Original Bike Hitch Instruction Manual

June 12, 2024
Delta

delta BH1000 Original Bike Hitch

Product Information

The Bike HitchTM is a device designed to securely hold bicycles. It is intended for use in stationary locations and should not be used to support a rider while on the bike. The product does not include bolts, so the length of bolts needed will depend on the specific application. To prevent loosening, it is recommended to use nuts with nylon inserts, thread-locking fluid, or lock washers.

Product Usage Instructions

  1. Place the Bike Hitch in the desired location and mark one hole for drilling.
  2. Using a 1/4-inch drill bit, carefully drill the hole. It is important to wear eye protection when using power tools.
  3. Insert a 1/4 inch (6mm) diameter bolt through the drilled hole and tighten it securely. Please note that bolts are not included and their length may vary depending on the application.
  4. Drill a second hole using the base of the Bike Hitch as a guide.
  5. Insert the second bolt through the second hole and tighten it securely.

To access an assembly video or download additional resources, please visit designbydelta.com/downloads.

WARNING: The Bike Hitch is designed solely for holding a bicycle and isnot intended to support a rider. It should never be used with a person on the bike.
Front Fork Assembly video: Visit designbydelta.com/downloads and search for the video with code 120922.

Assembly instructions

  1. Place Bike Hitch in the desired location and mark one hole for drilling.
  2. Drill hole using 1/4″ bit.
    • IMPORTANT SAFETY NOTE: Wear eye protection when using power tools.
  3. Insert a 1/4″ (6mm) diameter bolt through the hole and tighten securely. (Bolts are not included – length will vary with application)
  4. Drill the second hole using Bike Hitch’s base as a guide.
  5. Insert the second bolt and tighten it securely. To prevent loosening, we recommend the use of nuts with nylon inserts, thread-locking fluid, or lock washers.delta-BH1000-Original-Bike-Hitch-FIG-1

WARNING
The Bike Hitch is designed to hold a bicycle only and has not been designed to support a rider and should never be used with a person on the bike.

Assembly video

Visit designbydelta.com/downloads.delta-BH1000-Original-Bike-Hitch-FIG-2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals