Linksys EA9200 (AC3200) TRI-BAND GIGABIT Wi‑Fi ROUTER User Guide

Linksys EA9200 (AC3200) TRI-BAND GIGABIT Wi‑Fi ROUTER

Product Overview

EA9200 Front view

• Indicator light — The Linksys logo stays on steadily while power is connected and following a successful Wi-Fi Protected Setup connection. Flashes or pulses slowly during bootup, during firmware upgrades, and during a Wi-Fi Protected Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup error.

Back view

The ports/buttons from left to right: USB 3.0, USB LED, USB 2.0, USB LED, Ethernet ports (1-4), Internet port, Power port, Power switch, Reset button

• USB ports — Connect and share a USB drive or a USB printer.

• USB LEDs — Illuminate when a USB drive is connected. Flash when data is being transferred.

• Ethernet ports — Connect Ethernet cables to wired Ethernet network devices.
  NOTE: For best performance, use CAT5E or higher-rated cables on the Ethernet ports.

• Internet port — Connect an Ethernet cable to your modem.

• Power port — Connect the included AC power adapter.

• Power switch — Press | (on) to turn on the router.

• Reset button — Press and hold for 10 seconds (until the port lights flash at the same time) to reset the router to factory defaults. You can also do this using Linksys Smart Wi-Fi.

Side view

• Wi-Fi Protected Setup™ button — Press to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices.
• Wi-Fi button — Press to disable the wireless networks (light comes on). Press again to enable the wireless networks (the light goes out).

Top view

• Adjustable antenna ports — Three adjustable external antennas (included) should be connected to the router before powering it on. Twist antenna connectors clockwise onto ports.

Setting Up Your Router

Where to find more help

Linksys.com/support (documentation, downloads, FAQs, technical support, live chat, forums) Linksys Smart Wi-Fi (linksyssmartwifi.com; click Help at the top of the screen)

How to install your router

If replacing an existing router, disconnect it.

1. Connect the antennas to the top of your router and power it on.
2. Connect the Internet cable from your modem to the yellow Internet port on the back of your router. Wait until the Linksys logo on the front of your router is solid.
3. Connect to the secure wireless name shown in the Quick Start Guide that came with your router. (You can change these details later.) Select the option to automatically connect to this network in the future. You will not have Internet access until you complete the router setup (see Step 4).
4. Open a web browser to launch the Linksys Smart Wi-Fi Router setup instructions. If you don’t see the instructions, type linksyssmartwifi.com in the address bar.

At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to manage your router’s settings, including:

• Change your router’s name and password
• Set up guest access
• Configure parental controls
• Connect devices to your network
• Test your Internet connection speed

NOTE: As part of Linksys Smart Wi-Fi account setup, you will be sent a verification e-mail. Make sure that you open the e-mail from Linksys and click the provided link, and log in from a device connected directly to the router.

How to connect to Linksys Smart Wi-Fi

1. Open a web browser and go to www.linksyssmartwifi.com.
2. Enter the e-mail address and password you set up earlier and click Sign in.

How to change router settings

NOTE: For additional help on any menu, click Help at the top of the screen.

• Open Linksys Smart Wi-Fi and log in to your account.
• In the menu on the left, click an option:

Network Map — This lets you display and manage all network devices connected to your router. You can view devices on your main network and your guest network, or display information about each device.

Guest Access — Lets you configure and monitor a network that guests can use without accessing all of your network resources.

Parental Controls — Lets you block web sites and set Internet access times.

Media Prioritization — This lets you set which devices and applications have top priority for your network traffic.

Speed Test — Lets you test your network’s Internet connection speed .

External Storage — Lets you access an attached USB drive (not included) and set up file sharing, a media server, and FTP access.

Connectivity — Lets you configure basic and advanced network settings .

Troubleshooting — This lets you diagnose problems with your router and check the status of the network.

Wireless — This lets you configure your router’s wireless network. Among the settings you may change are network name (SSID), security mode, password, MAC filtering, and connect devices using Wi-Fi Protected Setup.

Security — This lets you configure your router’s wireless security. You can set up the firewall, and VPN settings, and make custom settings for applications and games.

Troubleshooting

This chapter can help you solve common setup issues and connect to the Internet. You can find more help from our award-winning customer support at linksys.com/support.

Your router was not successfully set up

If Linksys Smart Wi-Fi did not complete the setup, you can try the following: Press and hold the Reset button on your router with a paperclip or pin until the LED starts flashing (about 10 seconds), then install the router again. If you still haven’t set up the router, find another computer, and use that computer to install the router again.

Windows XP Service Pack update

On Windows XP computers, Linksys Smart Wi-Fi requires Service Pack 3. If the currently installed Service Pack is older than version 3, you need to download and install Service Pack 3.

NOTE: To temporarily connect to the Internet and download the required Service Pack, you can use the included Ethernet cable to connect your computer directly to your modem.

To Install Service Pack 3:

1. Connect to the Microsoft Update website (update.microsoft.com/windowsupdate).
2. Follow the instructions on the website or contact Microsoft if you need further help.
3. After downloading and installing Service Pack 3, install the router again.

Your Internet cable is not plugged in message

If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps. Make sure that an Ethernet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet.

**
Back view of the router

Back view of cable modem**

Back view of DSL modem

Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l position. If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP. Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port. If your computer was previously connected to your modem with a USB cable, disconnect the USB cable. Install the router again.

Cannot access your router message

To access your router, you must be connected to your own network. If you have wireless Internet access, the problem may be that you have accidentally connected to a different wireless network.

To fix the problem on Windows computers:

1. On your Windows desktop, right-click the wireless icon in the system tray. The icon can differ depending on your version of Windows.
2. Click View Available Wireless Networks. A list of available networks
3. Click your own network name, and click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys EA9200 network, BronzeEagle in this example, is shown selected.
4. If you are prompted to enter a network key, type your password (Security Key) into the Network key and Confirm network key fields.Click Connect. 
5. You should be able to access the router.

To fix the problem on Mac computers: In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks appears. Linksys Smart Wi-Fi has automatically assigned your network a name. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys EA9200 network, BronzeEagle in this example, is shown selected.

Click the wireless network name of your Linksys EA9200 (BronzeEagle in the example). Type your wireless network password (Security Key) into the Password field, and click OK.

Specifications

Linksys EA9200

• Model Name: Linksys AC3200 Tri-Band Smart Wi-Fi Router
• Description: Tri-Band AC Router with Gigabit and 2×USB
• Model Number: EA9200
• Switch Port Speed: 10/100/1000 Mbps (Gigabit Ethernet) Radio Frequency 2.4 GHz and 5 GHz (x2)
• # of Antennas: 3 external adjustable dual-band antennas, 3 internal 5GHz antennas
• Ports: Power, USB (2), Internet, Ethernet (1-4), R-SMA antenna (3)
• Buttons: Reset, Wi-Fi Protected Setup, Wireless, Power
• LEDs: Front panel: Power/WPS Back panel: Internet, Ethernet (1-4), USB (2) Side panel: Wireless
• UPnP: Supported
• Security Features: WEP, WPA2, RADIUS Security Key Bits Up to 128-bit encryption
• Storage File Systems Support: FAT, NTFS, and HFS+
• Browser Support: Internet Explorer 8 or higher, Firefox 4 or higher, Google Chrome 10 or higher, and Safari 4 or higher

Environmental

• Dimensions : 9.76” x 8.15” x 3.15” (248 x 207 x 80mm) w/o antennas
• Unit Weight: 25oz (710g) w/o antennas
• Power: 12V, 4A
• Certifications: FCC, IC, Wi-Fi a/b/g/n/ac, Windows 7, Windows 8, DLNA
• Operating Temp.: 32 to 104°F (0 to 40°C)
• Storage Temp.:  -4 to 140°F (-20 to 60°C) Operating Humidity 10 to 80% relative humidity, non-condensing
• Storage Humidity:  5 to 90% non-condensing

Notes

For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range, and coverage. Performance depends on many factors, conditions, and variables, including distance from the access point, volume of network traffic, building materials, and construction, operating system used, a mix of wireless products used, interference, and other adverse conditions.

Visit linksys.com/support for award-winning technical support BELKIN, LINKSYS, and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.© 2014 Belkin International, Inc. and/or its affiliates. All rights reserved.
LNKPG-00172 Rev. B00

FREQUENTLY ASKED QUESTIONS

What is the Linksys EA9200 (AC3200) Tri-Band Gigabit Wi-Fi Router?

The Linksys EA9200 (AC3200) is a high-performance tri-band router designed to provide fast and reliable Wi-Fi connectivity in your home or office.

How many bands does the Linksys EA9200 support?

The Linksys EA9200 supports three bands: one 2.4 GHz band and two 5 GHz bands.

What is the maximum theoretical Wi-Fi speed supported by the Linksys EA9200?

The Linksys EA9200 supports a maximum theoretical Wi-Fi speed of up to 3200 Mbps (1300 Mbps on each 5 GHz band and 600 Mbps on the 2.4 GHz band).

What are the main features of the Linksys EA9200?

The main features of the Linksys EA9200 include tri-band technology, gigabit Ethernet ports, USB ports for sharing devices, beamforming technology, and advanced security features.

How many Ethernet ports does the Linksys EA9200 have?

The Linksys EA9200 has four Gigabit Ethernet ports for wired connections.

Can I connect a printer or external hard drive to the Linksys EA9200?

Yes, the Linksys EA9200 has USB ports that allow you to connect a printer or external hard drive for sharing over the network.

Does the Linksys EA9200 support beamforming technology?

Yes, the Linksys EA9200 supports beamforming technology, which helps to improve the Wi-Fi signal strength and coverage.

Can I set up a guest network with the Linksys EA9200?

Yes, the Linksys EA9200 allows you to set up a separate guest network to provide internet access to your visitors without sharing your main network password.

Does the Linksys EA9200 support parental controls?

Yes, the Linksys EA9200 has built-in parental controls that allow you to restrict internet access and set up content filtering for specific devices or users.

Can I remotely manage the Linksys EA9200?

Yes, you can remotely manage the Linksys EA9200 using the Linksys Smart Wi-Fi mobile app or through a web browser.

Does the Linksys EA9200 support IPv6?

Yes, the Linksys EA9200 supports IPv6, the latest version of the Internet Protocol.

Is it possible to prioritize certain devices or applications with the Linksys EA9200?

Yes, the Linksys EA9200 has Quality of Service (QoS) settings that allow you to prioritize specific devices or applications for better performance.

What security features are available on the Linksys EA9200?

The Linksys EA9200 supports WPA/WPA2 encryption, an SPI firewall, and a VPN pass-through for secure remote access.

Can I use the Linksys EA9200 with my existing modem?

Yes, you can connect the Linksys EA9200 to your existing modem to create a wireless network.

Does the Linksys EA9200 have a built-in DSL modem?

No, the Linksys EA9200 does not have a built-in DSL modem. It is designed to work with a separate modem.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Linksys EA9200 (AC3200) TRI-BAND GIGABIT Wi‑Fi ROUTER User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>