beamZ ICE700 Ice Fogger Machine Instruction Manual

: June 4, 2024
: beamZ

Table of Contents

ICE700 Ice Fogger Machine
UNPACKING INSTRUCTION
POWERSUPPLY
INSTALLATION
FILLING FLUID TANK
OPERATION
CLEANING
REPLACING THE FUSE
ACCESSORIES
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ICE700 Ice Machine
Ref. nr.:160.514

beamZ ICE700 Ice Fogger Machine

INSTRUCTION MANUAL

ICE700 Ice Fogger Machine

Congratulations to the purchase of this Beamz ice fogger machine. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage-carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet, and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazards, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse. during a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
During operation, the housing becomes very hot. Do not touch it during the operation and immediately after.
To prevent accidents in companies, you must follow the application guidelines and follow instructions.
Secure the unit with an extra safety chain if the unit is ceiling-mounted. Use a truss system with clamps. Make sure nobody stands in the mounting area. Mount the
effect at least 50cm away from inflammable material and leave at least 1-meter space on every side to ensure sufficient cooling.
This unit contains high-intensity LEDs. Do not look into the LED light to prevent damage to your eyes.
Do not repeatedly switch the fixture on and off. This shortens the lifetime.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Only operate the unit with clean hands.
Do not force the controls.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the main lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if the power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks should be aware of the effects that this light effect may have on them.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving, carefully unpack the carton, and check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain the packing material for inspection if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that an ice fogger machine must be returned to the factory, it is important that the ice fogger machine be returned in the original factory box and packed.

If the ice fogger machine has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the ice fogger machine is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The smoke machine must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the smoke machine to a protected circuit (circuit breaker or fuse). Make sure the smoke machine has an appropriate electrical ground to avoid the risk of electrocution or fire.

INSTALLATION

CAUTION: Please consider the respective national norms during the installation! The installation must only be carried out by an authorized employee or dealer!

Attention:

The ice fogger machine has a built-in fluid tank, and must be transported and operated in an upright position.
Use only Beamz water-based fluid recommended by your dealer. Poor liquid caused permanent damage, bad effect, clogging, spitting of unevaporated liquid, etc.
Be sure that the ice fogger machine is positioned on a stable, non-slip surface.
Be sure that no ventilation slots on the product’s housing are blocked.
Don’t put any objects on the ice fogger machine.
Always install the ice fogger machine in an area with adequate ventilation.
Never connect the ice fogger machine to a dimmer pack.
In the event of a serious operating problem, stop using the product immediately.
The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once a year.
Never aim the smoke at yourself, people or animals.
Never aim the output nozzle directly at people or at open flames.
The ice fogger machine has to be installed out of the reach of people and animals.
Drain the tank before transporting or storing the product.
Never drink smoke fluid or use it on the inside or outside of a human body. If fluid gets in contact with skin or eyes, rinse thoroughly with water and call a doctor immediately!
Keep out of the reach of children.
For indoor use only.

CAUTION: When installing the ice fogger machine, make sure there is no higher in inflammable material (decoration articles, etc.) in between a distance of min. 20in or 0.5 meters.

FILLING FLUID TANK

Before filling disconnect from mains!
Step 1: Unscrew the cap of the fluid tank and fill it with the original Beamz smoke fluid only. This fluid is environmentally friendly, biodegradable, and leaves no residue when used correctly.
Step 2: Replace the cap and close it securely, ensuring the pipe is fed down to the bottom of the bottle.
Step 3: Open the ice reservoir cover by unscrewing the fixation screw. Fill the reservoir with regular ice cubes and close the cover.
Step 4: Connect the mains plug.

OPERATION

Connect the power lead into the ice fogger machine and earthed main outlet. Then you can switch the power on by ON/OFF switch.

After a certain warm-up time, the ice fogger machine is ready to operate. Then the stand-by LED of the remote control lights up. By operating the smoke switch on the remote control the low smoke emission starts. It may happen that the stand-by lamp turns off and the smoke emission stops. In this case, the device is heating up again and will be ready to operate in approx. 1 min. Switch off when the ice fogger machine is not used and unplug from mains if not used for long periods.
Attention: Drain the water in regular intervals (approximately every 30 minutes).

Do not allow the pump to run dry!

CLEANING

The ice fogger machine must be cleaned to avoid deposits in the machine, pump, and heater.
Run clean procedure in a well-ventilated area!

Procedure:

Remove smoke fluid from the tank, and fill “Beamz smoke machine cleaner fluid” (item no. 160.670) into the empty tank.
Switch the power on and wait until the smoke machine is warmed up.
Press the button of the remote control and pump the liquid through the machine.
Perform the above operation until the tank is empty.
Fill the tank with Beamz smoke fluid.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug main lead.

Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.

ACCESSORIES

High-quality smoke fluid on a water basis, specially designed for Beamz smoke machines guarantees trouble-free use.

5-liter packaging, ref. no. 160.582
1-liter packaging, ref. no. 160.643

TECHNICAL SPECIFICATION

Rated voltage
Heating element
Heat up time
Fluid tank capacity
Ice tray capacity
Fuse
Dimensions
Weight| : 220-240VAC 50Hz
: 700Watt
: 3 Minutes
: 1,2L
: 0,4KG
: F5A
: 415 x 215 x 213mm
: 4,6kg
---|---

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

The products referred to in this manual conform to the European Community Directives to which they are subject: