beamZ Multibox 100w Rgbwap 4 Popular Effects Light User Guide
- October 27, 2023
- beamZ
Table of Contents
beamZ Multibox 100w Rgbwap 4 Popular Effects Light
LASER SAFETY
READ FOR THE COMMISSIONING OF THE LASER ALL SAFETY INSTRUCTIONS AND TECHNICAL DATA OF THIS MANUAL CAREFULLY AND THOROUGHLY.
CAUTION
- Do not point lasers at people or animals.
- Never look into the laser aperture or laser beams, this can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
- Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.
- Install the laser units such that laser beams above the audience move See section later in this manual.
- Test the laser units always first before the public is present.
- Do not point lasers into the public or at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser reflections can be hazardous.
- Never point a laser at aircraft or into the sky, this is a federal offense.
- Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
- Do not expose the output optic (aperture) to cleaning chemicals.
- The operation of a laser is only allowed if the show is controlled by a skilled and well-trained operator familiar with the requirements that are needed.
- Do not use laser if housing is damaged or open, or if optics appear damaged in any way.
- Never leave this device running unattended.
- Always use appropriate lighting safety cables when hanging lights and effects overhead.
The legal requirements for using laser entertainment products vary from country to country. The user is responsible for the leg al requirements at the location/country of use.
INSTALLATION
CAUTION
Please consider the respective national norms during the installation! The
installation must only be carried out by an authorized employee or dealers.
Use of controls, adjustments, or performance of procedures other than what is
specified herein may result in hazardous radiation exposure!
-
The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation.
-
Always use the supplied mounting bracket to hang the fixture.
-
The fixture should aid of a mounting bracket (not included) to the supplied mounting bracket to be confirmed.
-
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails.
-
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
-
The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking into operation for the first time and after changes before taking into operation another time.
-
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year. -
The fixture should be installed in the position where persons cannot reach.
-
For your own safety and for others, we do strongly recommend you to use this laser emergency kill switch.
(ref.no: 152.958) -
When installing the device, make sure there is no highly in inflammable material (decoration articles, etc.) in between a distance of min 0.5 meter.
DMX CHANNELS
| | |
---|---|---|---
1| Dimmer| 000- 255| Master dimming (0-100%)
2| Strobe Wash| 000- 255| Washing Stroboscope
(Rate 0-100%)
3| Colour Wash| 000- 255| Red (0-100%)
4| | 000- 255| Green (0-100%)
5| | 000- 255| Blue (0- 100%)
6| | 000- 255| UV (0-100%)
7| Strobe Derby| 000- 255| Effect Stroboscope (Rate
0-100%)
8| Colour Derby| 000- 255| Red (0-100%)
9| | 000- 255| Green (0-100%)
10| | 000- 255| Blue (0- 100%)
11| | 000- 255| White (0- 100%)
12| | 000- 255| Amber (0-100%)
13| | 000- 255| Pink (0-100%)
14| Rotation Derby| 000- 009| No function
| | 010- 129| Effect motor clockwise rotation ( From slow to
fast )
| | 130- 255| Effect motor un-clockwise rotation ( From
slow to fast )
15| Laser| 000- 009| No function
| | 010- 059| Laser Red
| | 060- 109| Laser Green
| | 110- 1 5 9| Laser Red + Green
| | 1 60 – 255| Laser rainbow e ff e
ct （ From slow to fast ）
16| Rotation Laser| 000- 009| No function
| | 010- 129| Laser motor clockwise r ot
atio n （ Fr om slow to fast ）
| | 130- 255| Laser motor un-clockwise r ot
atio n （ From slow to fas t ）
17| Strobe SMD| 000- 009| No function
| | 010- 255| SMD Stroboscope (Rate 0-100%)
18| Mode| 000- 009| No function
| | 010- 019| Auto p r o g r a m
1
| | 020- 029| Auto program2
| | 030- 039| Auto program3
| | 040- 049| Auto program4
| | 050- 059| Auto program5
| | 060- 069| Auto program6
| | 070- 079| Sound p r o g r a m
1
| | 080- 089| Sound program2
| | 090- 099| Sound program3
| | 1 00- 109| Sound program4
| | 110- 119| Sound program5
| | 120- 255| Sound program6
19| Program Speed| 000- 255| Auto and
Sound program speed (Slow-fast)
Beamz is a leading developer of lighting products, including intelligent DMX moving heads, wireless battery operated DMX effects, static washes, sound- activated club effects, strobes & blacklights, LED lighting, fog and special effects machines, lasers and indoor and outdoor architectural lighting, as well as lighting controllers and protective bags.