BeamZ Pro BTK-200W Fresnel Zoom Toneelspot 200W LED Warm User Guide
- June 1, 2024
- beamz Pro
Table of Contents
BeamZ Pro BTK-200W Fresnel Zoom Toneelspot 200W LED Warm
Product Information:
Specifications:
- Model: BTK200W
- Version: 155.105 V1.0
- DMX Address Range : 001-512
- Dimming Range : 000-255
- Strobe Speed Range : 000-255
Product Usage Instructions
Setting DMX Address:
To set the DMX address:
- Press the up or down button to adjust the DMX address.
- Press Enter to save the set DMX address.
Dimming Control:
To adjust dimming levels:
- Press Enter to enter dimming mode.
- Use the up or down button to transition from darkness to brightness.
- Press Enter to save the desired dimming level.
Strobe Speed Control:
To adjust strobe speed:
- Press Enter to enter strobe speed mode.
- Use the up or down button to change the strobe speed from slow to fast.
- Press Enter to save the selected strobe speed.
Operational Modes:
For different operational modes:
- In case of a lost DMX signal, turn to black-out mode by pressing Enter to save.
- In case of lost DMX signal, the device can keep the last DMX setting by pressing Enter to save.
- To display the current temperature, press Enter to save.
- To turn the display on or off based on operating status, press Enter to save.
FAQ:
- Q: How can I reset the device settings?
- A: To reset the device settings, power off the unit and hold the reset button for 10 seconds. This will restore the default settings.
- Q: What should I do if the device is not responding to DMX signals?
- A: Check the DMX connections and ensure that the correct DMX address is set. If the issue persists, contact customer support for further assistance.
CONTROL MENU
DMX CHANNELS
offers a wide range of high-performance lighting equipment and related accessories for the rental, entertainment and architectural lighting markets. BeamZ Pro stands for performance, innovation and value pricing!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>