Russound VoicePlay V-KP-1 Amplified Keypad with Amazon Alexa Built in User Manual
- June 4, 2024
- Russound
Table of Contents
Product Manual
VoicePlay™ V-KP-1
Amplified Keypad with Amazon Alexa Built-in
V·KP·1 OVERVIEW
V·KP·l WHATS IN THE~ BOX
What’s In the Box
1 Russound V-KP-1 Wall-Mounted
Wi-Fi Amplied Keypad with Amazon Alexa Built-In
1 Removable, Screw-Down 2-pin Power Connec tor (accepts up to 14AWG wire)
1 Removable, Screw-Down 4-pin Speaker Con nector (accepts up to 14AWG wire)
1 Color Change Faceplate (Black)
What you need for the Installation
1 Russound V-PS-2 Power Supply (sold separately, supports up to 2 V-KP-1
touchpads)
Flat mini-screwdriver for the speaker connectors
Flat Screwdriver for the Wallplate Mounting
2 Philips Screwdriver for attaching the V- KP-1 to the mounting box
Wire Strippers
V·KP-1 CONNlECTION AND SETUP
Making the Connections
Note: All wiring connections must be made with the system powered off and
the V-PS -2 power cord disconnected from the electrical mains (unplugged from
the wall outlet).
The V-KP-1 is very easy to install and only requires two connections: power
and loudspeakers. Power is provided from the V-PS-2 power supply and may be
done locally or may be run using CL-2 rated cable up to 100 meters through the
home from a central location to the room where the V-KP-1 is mounted.
The V- KP-1 is designed to be able to re-use any existing wiring in a home in
order to upgrade existing legacy audio system components to a modern, voice-
controllable, multi-room audio system.
The majority of existing installed audio systems utilized a “home” run of
speaker wires from some central location to volume control in each of the
rooms of the home. From those volume controls, separate speaker wires would
then be run within the room to the left and right loudspeakers.
If your system used this type of “Home” run wiring, you can use two of those
conductors to carry the power from the V-PS-2 Power Supply to the new V-KP-1.
The V-KP-1 would be mounted in the same location as the previous volume
control and the existing wires to the room’s loudspeakers would be switched
from the previous volume control to the new V- KP-1.
The V-PS -2 includes important safety features such as over-current, over-
temperature, and short-circuit protection and can even indicate trouble in an
existing wiring configuration which is especially critical when utilizing
existing wiring in a home to ensure a proper electrical connection.
V·KP-1 USING THE KEYPAD WITH SPOTIFY CONNECT
First, make sure:
All devices are on the same Wi-Fi network.
Your Spotify app is installed and up-to-date on your phone/ tablet.
From your phone/ tablet:
- Open Spotify and play something.
- Tap the Spotify Connect Device icon at the bottom of the screen.
- Tap the V-KP-1 device you want to play to.
V-KP-l NEW INSTALLATION
For a new installation, the location of the V- PS -2 power supply will be
based on the wiring being done in the room and around the home in any other
rooms. Each V-PS-2 can power up to 2 V-KP-1 wall-mounted amplifiers. Depending
on the wiring that will be done at the home, it might be best to locate your
power supplies in a central wiring location for the entire home, in a central
location for each floor or section of a home, or in a wiring closet near
adja~ent rooms, for example.
Loudspeakers will always connect directly to the V-KP-1 and typically those
wires are run locally within the room from the loudspeakers to the wall-
mounting location. The CL2-rated wire must be used when running wire within a
home’s walls.
When connecting the speaker wires, be sure to observe proper polarity. The
positive and neg active terminals on the V-KP-1 must correspond with the
positive and negative terminals at both the left and right loudspeakers. This
is also true of the power connections between the V-PS-2 power supply and the
V-KP-1
Strip¼” (about 6mm) from each of the conductors for both the left and right
loudspeaker connections and insert them into the removable screw-down
terminal, making sure to match the proper polarity of each connection. Tighten
the screw-down connections securely and make sure that there are no exposed
strands that might cause a short circuit.
Once your speaker connections and power connections have been made to the
V-KP-1, you are ready to make the same connections at the V- PS -2 for the
power connection.
With the V-PS-2 disconnected from electrical power, strip ¼” (about 6mm) from
each of the conductors and insert them into the removable screw-down terminal
on the V- PS-2, making sure to match the proper polarity of each connection.
Tighten the screw-down connections securely and make sure that there are no
exposed strands that might cause a short circuit.
Impedance Setting
The V-KP-1 supports both 4-ohm and 8-ohm loudspeaker connections. There is a
slider switch at the rear of the V-KP-1 that can be set to either 4 or 8 ohms.
The default is 8 ohms. If using the V-KP-1 with a 4-ohm speaker load, set the
switch on the back to the 4-ohm position. The switch can be adjusted at any
time without needing to power down the device or disconnect the speakers. Once
the connections have been made, connect the V-PS-2 power supply to the
electrical mains to power up the system. You will see a green light on the
front of the V-PS-2 when it is plugged in. The V-KP-1 status LED will blink on
and off indi citing that the device is powered up and awaiting Wi-Fi
configuration.
WI-Fl Configuration
When first powered up, the V-KP-l’s LED lights will flash intermittently until the device is ready for use. It will then announce “Connecting to network. This will take from 1 to 3 minutes” and the Status LED will begin to blink green. It is now ready for connecting::::>n to your Wi-Fi network. Your V-KP-1 Wi-Fi connection is configured with the Russound VoicePlay App, available for down load from the App Store for iOS devices and from the Google Play Store for Android devices. The Russound VoicePlay App is also used to link the V-KP-1 with your Amazon Account.
To connect to your WI-Fl network and set up your V-KP-1:
Open the VoicePlay app on your phone or tablet. The app will search for any
existing Voice Play de vices. If this is your first Voice Play device, tap on
“Add Device” at the bottom of the search screen and follow the instructions
within the app. The app will connect your Voice Play device to your Wi-Fi
network, will check for any available firmware updates, will help you name the
device for the room that it is in, and will then guide you through associating
it with your Amazon account.
Using your V-KP-1 without an Amazon account
For the best possible experience, and to enable voice control, we strongly
recommend asso creating your VoicePlay device with an Amazon account. If you
choose “Not Now” when asked to associate your Amazon account, your V-KP-1 can
still be used as a Bluetooth device, and for casting audio such as Spotify
Connect. The front panel volume controls on the V-KP-1 will be fully operable.
Enter your Amazon account information when prompted.
Language Selection
After linking your Amazon account to your V-KP1, you will be prompted to
select your preferred language for use with Alexa. Select the appropriate
language for you to use for all of your voice interactions with Alexa on the
V-KP-1.
Other Settings
Once your V- KP -1 has been linked to your Ama on account, you can access
additional settings using the Alexa app and selecting the V-KP-1 from the list
of devices on your account The Alexa app can also be used to select default
music services, select any music, and to join rooms for synchronized multiroom
music. Up to 10 VoicePlay devices can be synchronized in a home.
Using the V-KP-1 with multiple loudspeakers
You can connect up to 2 pairs of 8-ohm speakers to the V-KP-1. When doing
this, make sure to set the V-KP-1 impedance switch on the rear of the device
to 4 ohms. All speaker connec tions should be done in parallel, with both
left speakers’ positive(+) terminals being connected to the V-KP-1 left+
terminal and with both right speakers’ negative(-) terminals being connected
to the V-KP-1’s right – terminal.
Adding additional amplification
If being used in a very large room, or where extra amplification is needed,
Russound offers several models of amplifiers with a speaker-level input that
can be used with the V-KP-1.
Using Spotlfy Connect
Spotify is an award-winning digital music service that gives you on-demand
access to over 20 million tracks. Spotify makes it easier than ever to
discover, manage and share music with your friends while making sure that
artists get a fair deal.
Spotify lets you listen to millions of songs – the artists you love, the
latest hits and discoveries just for you.
Spotify is not only extremely popular in the US but also worldwide. Spotify is
available in 57 markets globally, making it the largest worldwide availability
of any streaming service. The Spotify Software is subject to third-party
licenses found here: www.spotify.com/connect/third-party-
licenses.
The V-KP-1 supports Spotify Connect, allowing you to play Spotify on your
V-KP-1 using the Spotify App on your phone or tablet. With Spotify Connect,
you can listen to your favorite music using the Spotify app as a remote. In
order to get Spotify, the Spotify App must be installed on the phone or tablet
that is connected to the same network as your Russound system. The Spotify App
is available on the Apple App Store as well as the Google Play Store. However,
in order to use Spotify on your Rus sound system, a Spotify Premium Account is
required.
New users to Spotify can receive a 30-day free trial from Spotify by going to
www.spotify.com/freetrial.
Music Services
Amazon offers a variety of music services that can be accessed using your
V-KP-1. The availability of these services varies by country and changes from
time to time. An up-to-date list of the services available in each country is
available on the Amazon website or through the Alexa app.
Bluetooth• Audio
Your V-KP-1 is designed to pair with phones/tablets to allow you to play the
audio content from your favorite apps. To pair your phone or tablet, simply
say “Alexa, connect to my phone” and the V-KP-1 will be discoverable by nearby
Bluetooth devices. Bluetooth pairing and management of paired devices can also
be accomplished through the Alexa app.
Using Amazon Alexa
You’re now ready to start enjoying your favorite mu sic and audio available
with a simple voice command like “Alexa, play some music”. You also have
access to other great Alexa features like settings, alarms, timers, asking
about the local weather, controlling your Smart Home devices, and accessing
your favorite Alexa skills for games, activities, and more. Feel free to
explore all that Alexa can do and stay up to date with any new features or
skills through the
Alexa app.
Factory Reset Procedure
If you ever need to perform a factory reset of your V-KP-1, simply press and
hold both the Mic Mute and the Alexa Action buttons simultaneously until
you hear a voice confirmation that the factory reset procedure is complete.
Performing a Factory Reset will erase all settings and information on the
device including its Wi-Fi network connection information.
Note: If you are no longer using the V-KP-1, you can delete the V-KP-1
from your device list in your Amazon account using the Alexa app.
V·KP·l SPECIFICATIONS
Privacy Considerations
Your privacy is very important to Russound.
The microphone array of the V-KP-1 can be turned off at any time by pressing
the Mic Mute button on the front of the V- KP-1.
When muted, the Mic Mute LED will illuminate red and, in this state, not only
is the microphone software disabled but the entire mic array is also
disconnected from its electrical supply and is completely inactive. In this
state, the V-KP-1 cannot be accessed by any voice commands, but could still be
used with other audio sources such as the VoicePlay app, the Amazon Alexa app,
Spotify Connect sources or Bluetooth Audio, etc. To re-enable the microphones,
simply tap the Mic Mute button again until the red LED turns off.
Notices:
Use of the Works with Apple badge means that an accessory has been designed to
work specifically with the technology identified in the badge and has been
certified by the developer to meet Apple performance standards.
Power Output | 2 x 15W, 4 or 8 Ohm Selectable |
---|---|
Frequency Response | 20-20k1z, +/- 1d8 |
Distortion | <0.1% (20Hz-20KHz@15W, 4/8 Ohms |
Wi-Fi | 802.11 a/b/g/n/ac, 1×1 |
Audio Formats | MP3, AAC, FLAC, ALAC, WMA, and OGG |
Mounting Depth behind Faceplate | 2.44″ (62 mm) |
Dimensions (HxWxD) | 4.2″ x 1.7″ x 2.5″ |
(106mm x 42.4mm x 63.6mm)
Maximum Number of V-KP-1 on a network| 32
Maximum Number of Synchronized Rooms for Multiroom Music| 10
V-KP-1 WARRANTY
Visit russound.com
for warranty information
Russound
1 Forbes Road, Newmarket, NH 03857
Telephone: 603.659.5170
Email: tech@russound.com
www.russound.com
©2021 Russound/FMP, Inc. All rights reserved. Russound and the Russound logo
are registered trademarks of Russound /FMP, Inc. Apple and AirPlay are
trademarks of Apple Inc., registered in the U.S. and other countries. All
other trademarks are the property of their respective owners. Specifications
are subject to change without notice. 6.21.2021 Rev. 4
VoicePlay
Streaming Amplified In-Wall Keypad Solution and Power Supply
Designed as the primary audio source in new and existing audio systems
Works with Alexa, Apple AirPlay 2, Spotify Connect, and other popular
streaming services
Bluetooth 5.0 for playing audio from any phone or tablet
Power across any existing wiring (A-BUS, Cat5, or speaker wire)
Great builder solution
In-wall multi-room system with streaming audio and voice control with Amazon Alexa built-in.
VoicePlay Keypad Features
Bluetooth, streaming, multi-room audio, and app control Easy touch Volume Up,
Volume Down, Mic On/Off and Action (standard Alexa buttons) 15W per channel,
synchronize up to 10 rooms Includes both white and black color options
Services Included*
VoicePlay Power Supply Features
Power output 60W/24VDC
Each power supply supports two VoicePlay keypads
Over voltage, over current, and over temperature protection
– VoicePlay Keypads and Power Supply are sold separately. –
VoicePlay Keypad Overview
Specifications
Amplifier Model | V-KP-1 |
---|---|
Power Output | 2 x 15W, 4 or 8 Ohm selectable |
Frequency Response | 20-20kHz(±1dB) |
Distortion | <0.1% (20Hz-20kHz@15W, 4/8 Ohms) |
Wi-Fi | 802.11 a/b/g/n/a/c, 1×1 |
Audio Formats | MP3, AAC, FLAC, ALAC, WMA, and OGG |
Mounting Depth (behind faceplate) | 2.44” (62mm) |
Dimensions (HxWxD) | 4.2” x 1.7” x 2.5” (106mm x 43mm x 64mm) |
What’s in the Box
1 Russound VoicePlay Amplified Keypad
1 Removable, Screw-Down 2-Pin Power Connector
1 Removable, Screw-Down 4-Pin Speaker Connector
1 White Faceplate
1 Black Faceplate
2 Decora Wallplates (White and Black)
VoicePlay Power Supply (V-PS-2) sold separately
VoicePlay Power Supply Overview
Power Supply Model | V-PS-2 |
---|---|
Supplies Power For | Up to 2 VoicePlay Keypads |
Power Output | 60W/24VDC |
Protection | Over-current, over-voltage, and high temperature |
Dimensions (HxWxD) | 2” x 4” x 6” (51mm x 102mm x 153mm) |
What’s in the Box
1 Russound VoicePlay Power Supply
1 US Power Cord
1 Installation Guide
Application Wiring Diagram
Simplify multi-room audio systems with streaming and app control.
Upgrade to any VoicePlay system with no new wires.
Amazon Alexa Built-In
Bring the features of Alexa to a multi-room audio system.
©2021 Russound/FMP, Inc. All rights reserved. All trademarks are the property of their respective owners. Specifications are subject to change without notice. Russound is not responsible for typographical errors or omissions.
603.659.5170
russound.com
Documents / Resources
|
Russound VoicePlay V-KP-1 Amplified Keypad with Amazon Alexa Built
in
[pdf] User Manual
VoicePlay V-KP-1, Amplified Keypad with Amazon Alexa Built in, VoicePlay
V-KP-1 Amplified Keypad with Amazon Alexa Built in, VoicePlay V-KP-1 Amplified
Keypad, Amplified Keypad, Keypad
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>