DONNER DP-06 Folding Piano Keyboard User Manual

: June 12, 2024
: Donner

Table of Contents

DONNER DP-06 Folding Piano Keyboard
PANEL FUNCTION DIAGRAM
INTERFACE
FUNCTION
DUAL BLUETOOTH FUNCTION
DEMO
LIST OF TONE
LIST OF RHYTHM
FCC STATEMENT
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DONNER DP-06 Folding Piano Keyboard

DONNER-D-06-Folding-Piano-Keyboard-product

Welcome to Donner

We are very grateful to have you purchasing our product. Please take a few minutes to read the instructions for operating this product.which will show you how to use it and explain the function and operation of the device,ensuring a trouble-free installation. Please keep these operating instructions properly for future reference.

Warning

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND ANNOYING INTERFERENCE, PLEASE
USE ONLY THE RECOMMENDED ACCESSORIES FOR UNINTERRUPTED SERVICE OF THIS DEVICE!
DESIGN AND SPECIFICATIONS MAY CHANGE WITHOUT NOTICE.

WARNING

ELECTRIC SHOCK HAZARD
DO NOT OPEN

PANEL FUNCTION DIAGRAM

Fully charge the battery before use!

DONNER-D-06-Folding-Piano-Keyboard-fig-1 CHARGING INDICATOR

TYPE-C interface.
It is not applicable to PD fast charging line.
The charging indicator is red and turns green when it is full.
Battery: charging time is about 5H, please charge it more than 6H for the first time.
Power adapter: 5V/2A.

INTERFACE

DONNER-D-06-Folding-Piano-Keyboard-fig-2

SUS: Sustain pedal
MP3: MP3
MIC: Microphone
: Headphone/ Speaker
USB: TYPE-C charging/MIDI interface

FUNCTION

Volume adjustment, Start/Stop, Record/Play, Teaching ON (Velocity Switch), Chord, Sustain, Demo, Metronome, Tempo, Transpose, Rhythm.

Volume

Press Vol- or Vol+ to adjust the volume, the default boot volume is 12 (from 00-15).

Start/Stop

Press Start to enter the rhythm playing mode.
The sequence number will be displayed on the display.

Record/ Play (long press is Record, short press is Play)

Press and hold the Record/ Play button, At this time, play the keyboard to record MIDI signals.
Short press the Record/ Play button, and the last recorded signal can be played.

Learn

Press ON button, cyclic switching,
- Teaching A Teaching B Off Teaching A …
Teaching A: Play accompaniment, playing any key can play the main melody of the demo song.
Teaching B: Play accompaniment, the user presses the right keys to enter the next note.
- If the user does not press the right keys, they pause until they press the right keys to the next note.
Teaching songs: The current demo which is playing. Select the teaching songs by switching Demo.

Velocity Switch

Long press ON to enter the velocity setting, and long press ON to tum off the velocity. Default boot velocity.

Chord

Press Chord button, cyclic switching, SINGLE FINGERS Off-> SINGLE …
During the playing of rhythm, the system enters the chord mode.

Chord function: Press the key in the area C3-F4# to play the chords that match the rhythm, and the tone of the chords changes with the pitch of the hard.

Sustain

Press Sustain button to open the sustain function, then press off.
Turn on the sustain function, and make the tone produce the effect of continuance in performance.

Demo

Short press Demo button to play the demo. Press the demo button again to the next song. (Demo from 000-020)
Long press the Demo button to select the demo from 000-020 quickly.
Press to stop the demo.

Metronome

Press and the metronome will display the beat selection of 1/4, 2/4, 3/4 and 4/ 4.

Tone

Press Tone- or Tone+ to select the tone from 000-127 (see the attached tone table). The serial number of the adjusted tone will be displayed on the screen.
Long press Tone- or Tone+ to select the tone quickly.
Press Tone- and Tone+ at the same time to move back to tone 000 and play the piano tone.

Tempo

Press Tempo- or Tempo+ to adjust tempo, the default tempo is 8 level (from 0-16 level).
Long press Tempo- or Tempo+ to adjust the tempo quickly.
Press Tempo- and Tempo+ at the same time to move back to 8 level.

Transpose

Press Trans+ or Trans- to select rhythm. The shift can be selected from level -6 to +6, and the default level is +O.
Long press Trans+ or Trans- to quickly switch it.
Press and hold the Trans+ and Trans- at the same time to move back to level +O.

Rhythm

Press Rhy+ or Rhy- to select rhythm. 000-127 rhythms (please refer to the attached rhythm list), The sequence number will be displayed on the display.
Long press Rhy+ or Rhy- to adjust the rhythm quickly.
Press and hold the Rhy+ and Rhy- at the same time to move back to Rhy O and play the Rhy 0.

Slee p Mode

In the default mode, when the piano is not played after 10 minutes, the electric piano will turn off.
Then you need to press the m button to restart the piano again.

DUAL BLUETOOTH FUNCTION

It can connect App Bluetooth & Audio Bluetooth.
APP Bluetooth (Bluetooth Name: GZUT-MIDI)

iPhone CONNECTION

POPiano connection

Search and download POPiano APP from App store of the iPhone.
Open the POPiano App after turning on the Bluetooth of the iPhone, select any song, and choose to start playing after entering.
Click on the upper right of the iPhone screen and then you can choose: connect to the piano through Blue Tooth – Confirmed, next- confirm to connect to the piano.
After confirming Bluetooth connection, the icon is displayed as blue check mark .

GarageBand connection

Open GarageBand App.
Turn on Bluetooth on your phone.
Open GarageBand App and click the Settings icon in the upper right corner of the screen.
Connect the piano’s Bluetooth through the: Song Settings -Advanced – Bluetooth MIDI Devices.

Perfect Piano and PianoBar connection

Download the Perfect Piano App and PianoBar.
Turn on Bluetooth on your phone.
First connect the GarageBand App. When they are connected successfully, then open the Perfect Piano App and PianoBar can be used directly.

ANDROID PHONE CONNECTION

POPiano connection

Search and download POPiano APP from App store of the mobile phone.
Turn on the Bluetooth function, some phones need to turn on the phone location function.
Open the POPiano App to select any song, and choose to start playing after entering.
Click on the upper right of the mobile phone screen and then you can choose: connect to the piano through: Blue Tooth – Confirmed, next- confirm to connect to the piano.
After confirming Bluetooth connection, the icon is displayed as blue check mark .

Audio Bluetooth playback

Open the phone Settings to search for the Bluetooth name: GZUT-MUSIC.
After the connection is successful, the phone music is played, and the music is emitted from the piano.

DEMO

DONNER-D-06-Folding-Piano-Keyboard-fig-11

LIST OF TONE

DONNER-D-06-Folding-Piano-Keyboard-fig-12

DONNER-D-06-Folding-Piano-Keyboard-fig-13

LIST OF RHYTHM

DONNER-D-06-Folding-Piano-Keyboard-fig-14

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

this device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.