Orion HO350 Hydraulic Pressure Switches Owner’s Manual
- June 12, 2024
- Orion
Table of Contents
Orion HO350 Hydraulic Pressure Switches
Product Information
HM/HO350 Hydraulic Pressure Switches
The HM/HO350 Hydraulic Pressure Switches are compact and lightweight devices used in various applications such as high/low pressure alarms in CNC machines, compressors, hydraulic power packs, and manifolds/stacks with sandwich plates. They offer three mounting styles and come with a lockable protective cap to prevent tampering (optional). The switches have a choice of wetted parts to suit different working media. The electrical rating is 5A, 250VAC; 0.2A, 250 VDC (res.).
Pressure Capsule Details:
- O Ring
- Pressure Housing
- Sealing Ring
- Block
- Piston
- O Ring
- Backup ring
Installation Drawing:
For line mounting:
- 1/4BSP Female
- M6
- 0.59 inches
For subplate mounting:
- CD 13×28
For vertical stacking (CD 29 Diagonally):
- 39 mm (1.54 inches)
- A/F: 6 mm (0.24 inches)
- 36.5 mm (1.44 inches)
- 16 mm (0.63 inches)
- 86 mm (3.39 inches)
- 40 mm (1.57 inches)
Range Selection Table:
Range Code| Range (rising pressure)| Approximate Maximum Differential*|
Maximum Working Pressure
---|---|---|---
HM350| 35 – 350 bar (507.63 – 5076.32 psi)| 60 bar (870.22 psi)| 500 bar
(7251.89 psi)
Product Usage Instructions
To order the HM350 Hydraulic pressure switches, follow the below steps:
Group 1: Model
Specify “HM” for Hydraulic Pressure Switch or “HO” for Hydraulic Pressure Switch.
Group 2: Range Code
Select “350” as the range code for the HM350 Hydraulic pressure switch.
Group 3: Base Type
Select one of the following base types:
- “S” for Subplate mounting.
- “L” for Line Mounting.
- “V” for Vertical Stacking (2 mounting holes).
- “R” for Vertical Stacking (4 mounting holes).
Group 4: Protective Cap
Select one of the following options:
- “U” for without any protective cap.
- “P” for with a lockable protective cap.
Group 5: Wetted Parts
Select “M” for Standard Wetted parts.
Group 6: Enclosure
Select “0” for IP 65 enclosure.
For example, to specify a hydraulic pressure switch with a pressure range from 35 bar to 350 bar, as a subplate mounting element without a lockable protective cap and standard wetted parts with a standard enclosure, the full model number would be:
Group 1: HM
Group 2: 350
Group 3: S
Group 4: U
Group 5: M
Group 6: 0
Please specify the full model number when ordering to avoid ambiguity. If only the first two groups are specified, uncalibrated switches with standard wetted parts and enclosures will be supplied.
Description
- O Ring
- Pressure Housing
- Sealing Ring
- Block
- Piston
- O Ring
- Backup ring
Note: wetted parts are mentioned in italics.
INSTALLATION DRAWING
- can be rotated 90o
- two fixing screws
- space for removing plug
- space for removing key
- lockable protective cap
HYDRAULIC PRESSURE SWITCHES
GENERAL INFORMATION :
HM series pressure switches have a pressure die-cast aluminium powder coated
enclosure and are recommended for manifold mounting hydraulic applications.
The repeat accuracy is better than ± 1% FSR. A connector to DIN 43650 is
provided for wiring. Mainly intended for high pressure hydraulic presses.
FEATURES :
- Compact
- Lightweight
- Three mounting styles
- Lockable protective cap to avoid tampering (optional)
- Choice of wetted parts to suit working media
- Electrical rating : 5A, 250VAC; 0.2A, 250 VDC (res.)
Some Applications: Used in high/low pressure alarms in CNC machines, compressors, hydraulic power packs, manifolds/stacks with sandwich plates, etc.
Range Selection Table
- Differential ris Some Applications :
How to order HM350 Hydraulic pressure switches
Group 1| Group 2| Group 3| Group 4| Group 5| Group
6
---|---|---|---|---|---
Model| Range Code| Base Type| Protective Cap| Wetted Parts| Enclosure
HM 350-
Hydraulic Pressure Switch
HO 350-
Hydraulic Pressure Switch
| 350| S – for Subplate mounting.
L – for line Mounting V – for vertical
Stacking
(2 mounting holes)
R – for vertical Stacking
(4 mounting holes)
| U – without any protective cap
P – with a lockable protective cap
| M- for Standard Wetted parts| 0 – IP 65
Eg. A hydraulic pressure switch, pressure range from 35 bar to 350 bar, as a subplate mounting element without a lockable protective cap and standard wetted parts with a standard enclosure shall be specified by
Please specify full model number to avoid ambiguity. If only the first two groups are specified while ordering, uncalibrated switches with standard wetted parts and enclosures will be supplied.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>