**ASSEMBLY INSTRUCTION MODEL

ELL-B3006-PN**

Instruction Manual

ELL-B3006-PN Six Light Chandelier

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 6-Candelabra Bulb 60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE This fixture is DRY rated

How to Install

1. Decide the preferred hanging height and choose the chain needed.
2. Fix the mounting plate to the ceiling and connect the canopy to the mounting plate.

Installation of safety cable

1. Pass the long threaded pipe on the hickey through the center of outlet box. Attach it to the ceiling joist and secure it with nuts.
2. Feed wires and safety cable up through chain and the hole of screw collar loop. Have the wires and safety cable exit through the side of hickey.
3. Feed safety cable through the cable lock and coil it around the hickey twice. Then feed the cable through the lock again and tighten it with lock screw.
4. Continue to run safety cable through the top of outlet box and secure it to the ceiling joist.

**WARNING:** This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Part Number

Part Numbers
A. Mounting Hardware
(3)Wire Nut
(1)Hickey
(2)1/4″ IP NIPPLE
(4)Nut
(4)Flat Washer
(4)Spring Washer
B.(1)Screw Collar Loop
C.(1)Canopy;Ø6″x0.9″h;XMO3004PNCAN6IN
D.(1)Collar Ring
E.(2)Quick Link
F.(1)Chain;72″Lx Ø5.0mmT;XMO3004PNCHA5MM
G.(1)Loop
H.(1)Metal frame
I.(84)Nuts;XMO3002PNBANUT
J.(84)Metal cap
K.(42)Lucite rod;Ø1.5″x13.8″h;XMO3006LUCROD13.8IN
L.(6)Candle Sleeve;Ø1″x2.5″h;XMO3002PNCDL2.5IN

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>