PHILIPS DN570C Surface Luxspace Downlight User Manual
- June 4, 2024
- Philips
Table of Contents
PHILIPS DN570C Surface Luxspace Downlight
IN THE BOX
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- Only to be installed outside arms reach as recessed ceiling luminair.
- The light source contained in this luminaire is non user replacable, it shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Disconnect before servicing
This product contains a light source of energy efficiency class: see table
or label.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
All rights reserved. Reproduction in whole or in part is prohibited without
the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation
or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any
consequence of its use.
Publication thereof does not convey nor imply any license under patent- or
other industrial or intellectual property rights.
Signify Holding
The Netherlands