CRYSTORAMA EMO-5407-BF Emory 6 Light Linear Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION
MODEL#EMO-5407-BF
EMO-5407-BF Emory 6 Light Linear Chandelier
All electrical components must be installed by a licensed
electrician in accordance with the National Electric Code and the appropriate
local electrical codes. You will need 6- Candelabra Base Bulb 40 Watts
Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Damp
rated
How to install
- Feed the wires through the stem. Slip the down rod along wire and thread it onto the nippleon top of frame.
- Place the mounting plate over the outlet box. Mark four points on the ceiling at the center of the keyhole on the mounting plate.
- Drill four holes at the marked points and insert the wall anchors.
- Place the mounting plate over the outlet box and secure it with two outlet box screws. Insert the anchor screws into the wall anchors (Installed in step #3) and tighten..
- Determine the preferred hanging height and adjust to the chain required.
- Install canopy onto the mounting plate, and secure with the mounting screws.
- Hang glass drop to the banding ring.
- Install the bulbs(not included) into the socket.
WARNING: This
product can expose you to Lead which is known to the state of California to
cause cancer and/or birth defects or reproductive harm. For more information
go to www.P65Warnings.ca.gov
Part Number
Part Numbers
A. (1)-Mounting hardware
B. (1)-Mounting plate
C. (6)-Mounting screw
D. (1)-Canopy W5’’xL27-1/2’’xH3/4’’ #XRF5407BFCAN5IN
E. (1)-Chain -L72’’, 3.8mm thick #XRF5407BFCHA3.8MM
F. (2)-Stem W1/2’’xL12-3/4’’ #XRF5407BFROD12.75IN
G. (1)-Banding ring #XRF5407BFRING
H. (6)-Socket
I. (102)-Glass drop W1’’xL7-7/8’’
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>