CRYSTORAMA 4479-GD-CL-MWP Maria Theresa 12 Light Chandelier Instruction Manual

June 12, 2024
CRYSTORAMA

CRYSTORAMA-logo

CRYSTORAMA 4479-GD-CL-MWP Maria Theresa 12 Light Chandelier

CRYSTORAMA-4479-GD-CL-MWP-Maria-Theresa-12-Light-Chandelier-
product

Product Information

  • Model: #4479-GD-CL-MWP
  • Part Number: MODEL #4479-GD-CL-MWP
  • Lighting Type: Chandelier
  • Power Source: Electrical
  • Bulb Requirement: 12-Candelabra Base Bulb, 40 Watts Recommended, 60 Watts Max
  • Bulb Type: LED Bulbs (recommended for extended use)
  • Rating: Dry Rated

Product Usage Instructions

  1. Before starting the installation, make sure to do a complete inventory of all parts and components.
  2. Screw the column kit onto the coupling.
  3. Place the glass dish and small metal dish over the bottom metal cover and secure with the finial.
  4. Safety attach the fixture into the outlet box.
  5. Install bobeches and bulbs (not included).
  6. Connect the power.
  7. Start dressing the fixture with the packet labeled (A).
  8. IMPORTANT: Apply crystal sets in alphabetical order.

Crystal Sets:

  • A. 52 Sets – (1)14mm + AS20-2
  • B. 4 Sets – AS20-2 (No Jewel)
  • C. 8 Sets – (1)14mm + AS20-3
  • D. 4 Sets – (2)14mm + AS20-2.5
  • E. 24 Sets – (1)14mm + AS20-2.5
  • F. 8 Sets – (14)14mm
  • G. 1 Piece – (4)14mm + AS8-40mm Ball

Note:
The outlet box should contain parts A, B, C, E, F, G, H, I, J, L, M, O, P, Q, R, S.

WARNING:
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Turn off the power before installing or servicing the fixture.

WARNING:

  • Electrical Danger
  • Turn Power Off

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 12-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE

How to Install

  1. Do a complete inventory of all parts and components before you start installing.
  2. Screw the column kit on the coupling.
  3. Place the glass dish and small metal dish over the bottom metal cover and secure with the finial.
  4. After safety attaching the fixture to the outlet box, install bobeches, and bulbs (not included) and proceed to connect the power.
  5. When you begin to dress the fixture, start with the packet labeled (A).
  6. IMPORTANT: Apply crystal sets in alphabetical order.

CRYSTORAMA-4479-GD-CL-MWP-Maria-Theresa-12-Light-Chandelier-fig-
\(2\)

Crystal Sets

CRYSTORAMA-4479-GD-CL-MWP-Maria-Theresa-12-Light-Chandelier-fig-
\(3\)

  • A. 52Sets. (1)14mm + AS20-2″
  • B. 4Sets. AS20-2″(No Jewel)
  • C. 8Sets. (1)14mm + AS20-3″
  • D. 4Sets. (2)14mm + AS20-2.5″
  • E. 24Sets. (1)14mm + AS20-2.5″
  • F. 8Sets. (14)14mm
  • G. 1Piece. (4)14mm + AS8-40mm Ball

Part Number

  • A. (2)-Wire Connector
  • B. (1)-Mounting Plate
  • C. (2)-Outlet Box Screws
  • D. (1)-Lock washer
  • E. (1)-Hex Nut
  • F. (1)-Nipple
  • G. (1)-Canopy; w5″ x h1″ (XFB4474GDCAN5IN)
  • H. (1)-Collar Ring
  • I. (1)-Collar Loop
  • J. (1)-Chain; 72″, 4mm (XFB4473GDCHA4MM)
  • K. (1)-Ground Wire
  • L. (1)-Column
  • M. (1)-Frame
  • N. (1)-Glass Dish; Ø4″, 17mm hole, 4pin (XFB4474GDDIBOB4IN)
  • O. (1)-Metal Dish
  • P. (1)-Finial (XFB4473GDFIN)
  • Q. (12)-Candle Sleeve; h3″ (XFB4471CDL3IN)
  • R. (12)-Bobeche; Ø4″, 26mm hole, 4pin (XFB4471GDBOB4IN)
  • S. ( )-Rosette
    • PART BAGⅠ: Includes Parts A, C
    • PART BAG Ⅱ: Includes Parts B, D, E, F, H, ICRYSTORAMA-4479-GD-CL-MWP-Maria-Theresa-12-Light-Chandelier-fig- \(4\)

WARNING:
This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.

Crystorama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CRYSTORAMA User Manuals

Related Manuals