CRYSTORAMA DAN-400-VG Danielson Three Light Ceiling Mount Instruction Manual

LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL#DAN-400-VG

DAN-400-VG Danielson Three Light Ceiling Mount

All electrical components must b installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. You will need 3-Medium Base Bulb 40 Watts Frosted bulb Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Dry rated

How to install

1.  Install the mounting screws into the matching holes in the mounting bar. Secure the mounting bar to the outlet box with the outlet box screws.
2. Raise ceiling pan and upper frame allowing the mounting screws to protrude through the holes in the ceiling pan, and secure with the ball nut.
3. Install the bulbs(not included) into the socket.
4.  Slide the glass diffuser into the bottom of the lower frame.
5.  Slide the fabric shade inside the lower frame and secure it with clips.
6.  Raise the lower frame up and hang it onto the ring on the bottom of the upper frame.

NOTE: HIDE THE SEAMS OF THE SHADE BY ALIGNING IT WITH A VERTICAL METAL BAR.
HOW TO REPLACE THE BULB:
PLEASE TAKE THE LOWER FRAME OFF THE UPPER FRAME TO CHANGE THE BULB.

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer  and/or birth defects or reproductive harm. For moreinformation go to www.P65Warnings.ca.gov

Part Number

Part Numbers
A. (1)-Mounting hardware
B. (1)-Ceiling pan W5’’xH1’’
C. (2)-Ball nut #XRF400VGBANUT
D. (1)-Upper frame
E. (1)-Fabric shade W16-1/4’’XH6-1/2’’ #XRF400SHA16.25IN
F. (1)-Glass diffuser #XRF400DIF16.375IN
G. (1)-Lower frame

https://www.crystorama.com/

References

• Crystorama Lighting
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>