INTELLINET 508834 Industrial 8 Port Gigabit Ethernet Layer 2+ Web Managed Switch with 2 SFP Ports Instructions
- June 12, 2024
- INTELLINET
Table of Contents
8-Port Gigabit Ethernet
Layer2+ Web-
Managed Industrial Switch with 2 SFP Ports Instructions
Model 508834 (IIS-8G02M) Important: Read before use.
For additional benefits:
Scan to register your product warranty
or go to: register.intellinet-network.com/r/508834
✔️Instructions
The Intellinet 8-Port Gigabit Ethernet Layer 2+ Web-Managed Industrial Switch
with 2 SFP Ports offers an array of time-saving, cost-effective features while
providing superior network throughput.
Features
- Provides RJ45 data connections for up to eight network devices
- IP30 slim-type metal housing to withstand harsh industrial conditions
- Wide operating temperature: -40 – 85°C (-40 – 185°F)
- Option for DIN-rail installation
- Two small form-factor pluggable GBIC module slots (SFP)
- Two redundant DC inputs (44 – 57 V) with I/O terminal block With a backplane speed of 20 Gbps, plenty of performance is available for your computers, servers and other networking devices. Each of the ports automatically senses the link speed of the connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance. For the user manual and specifications, visit intellinetnetwork.com. Register your product at register.intellinet-network.com/r/508834 or scan the QR code on the cover.
LEDs
LED | Color | Status | Status Description |
---|---|---|---|
PWR | Green | On | Power on |
Off | Power off; abnormal power | ||
PWR1 & PWR 2 | Green | On | PWR input has power |
Off | Power is off or is working abnormally | ||
Link/ACT 1 – 8 | Green | ||
(10/100 Mbps) | On | Valid port connection (10/100 Mbps) | |
Blinking | Sending or receiving data | ||
Off | No link established or port is connected at 1000 Mbps speed | ||
Speed | Green | ||
(1000 Mbps) | On | Valid port connection (1000 Mbps) | |
Off | No link established or port is connected at 10/100 Mbps speed |
SFP
1 & 2| Green| On| Valid port connection
Blinking| Sending or receiving data
Off| No link established
Cat5e/6/6a UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
Power
Terminal Block Installation
NOTE: Ensure all power is off/disconnected before beginning!
- Loosen appropriate screws.
- Insert bare power-supply wires into appropriate terminal slots (positive wire into positive slot; negative wire into negative slot).
- Tighten appropriate screws to secure wires. (If desired, repeat steps 1 – 3 on second input pair.)
- Install block into the device and tighten screws.
Power Off Alarm
You can choose whether to connect the power failure warning device to the
connecting terminal marked “Fault” according to your requirements. When using
power redundancy, if one power source fails, a fault alarm will be generated.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal
connector is used to provide proper grounding for your Intellinet Network
Solutions switch. If you use the chassis grounding screw, it should be wired
to an object that provides earth ground.
Placement
Desktop Installation
Prior to use, place/position the switch:
- on a level surface that can support the weight of the switch and that offers at least 25 mm (approx. 1”) of clearance for ventilation;
- away from sources of electrical noise: radios, transmitters, broadband amplifiers;
- within 100 m (approx. 328’) of network devices it’s to be connected to.
DIN-Rail Installation
- With DIN-rail bracket attached to device with screws, angle bracket onto DIN rail.
- Push device in till it clicks into place.
Basic Web-Based Browser Management
-
Open your Web browser.
-
Enter http://and the IP address of the switch in the Address field.
The default management IP address is 192.168.2.1. -
Press Enter to display the login screen. In the Username field, enter admin; in the Password field, enter the serial number on the bottom of the switch. Click OK.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With
Separate Collection Systems)
This symbol on the product or its packaging means that this product must not
be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose of this product
by returning it to your local point of sale or recycling pickup point in your
municipality.
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instruction manual may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at his own expense. Any changes or modifications made to this
equipment without the approval of the manuafacturer could result in the
product not meeting the Class A limits, in which case the FCC could void the
user’s authority to operate the equipment.
This device complies with the requirements of CE 2014/30/EU and / or
2014/35/EU. The Declaration of Conformity for is available at:
support.intellinet-network.com/barcode/508834
| ****|
---|---|---
North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677, USA| Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan| Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany
All trademarks and trade names are the property of their respective owners.
intellinetnetwork.com
All trademarks and trade names are the property of their respective owners.
© IC Intracom. All rights reserved. Intellinet Network Solutions is a
trademark of IC Intracom, registered in the U.S. and other countries.
Printed on recycled paper.
INT_508834_QIG_0122_REV_5.11