CRYSTORAMA 506-EB-GA Six Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 506-EB-GA Six Light Chandelier
Product Information
The product is a light fixture with model number 506-EB-GA. It requires 6 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. It is recommended to use LED bulbs for extended use. The fixture is damp rated and comes with various parts and components including mounting hardware, canopy, collar ring, collar loop, quick links, hanging chain, fixture loop, metal cap, swivel, center stem, and candle sleeves.
Product Usage Instructions
Before you start installing the product, make sure you have all the required
parts and components by doing a complete inventory.
Follow the steps below for installation:
- Identify the stem A that is removable. There is a screw on the bottom of it.
- Attach the collar loop to the stem A and secure it with screws.
- Attach the metal cap to the stem A and secure it with screws.
- Attach the center stem to the collar loop and secure it with screws.
- Attach the swivel to the center stem and secure it with screws.
- Attach the fixture loop to the swivel and secure it with screws.
- Attach the collar ring to the center stem and secure it with screws.
- Attach the canopy to the collar ring and secure it with screws.
- Attach the quick links to the fixture loop and hanging chain.
- Attach the candle sleeves onto the sockets, and insert recommended bulbs (not included).
- Hang the fixture using the hanging chain and quick links.
Follow the steps below to replace the bulb:
- Identify the stem A that is removable. There is a screw on the bottom of it.
- Unscrew the stem A to remove it and make the bulb accessible.
- Replace the bulb with a recommended one (not included).
- Screw the stem A back into place.
ASSEMBLY INSTRUCTION
MODEL #506-EB-GA
WARNING:
Electrical Danger
Turn Power Off
All electrical components must be Installed by a llcensed electrlclan In accordance with the Natlona I Electric Code and the appropriate local electrical codes.
You will need 6 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DAMP RATED
How to install
- Do a complete inventory of all parts and components before you start installation.
- Place the candle sleeve onto the socket, and insert recommended bulb (not included).
How to replace the bulb
- Identify the stem A that is removable.(There is a screw on the bottom of it)
- Move it around to make the bulb accessible easily.
WARNING: This product can expose you to Lead, which Is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Wamings.ca.gov.
PART NUMBER
- A. (1) – Mounting Hardware
- B. (1) – Canopy(W5.25″,H1″) #XRE504EBGACAN5.25IN
- C. (1) – Collar Ring
- D. (1) – Collar Loop
- E. (2) – Quick Link
- F. (1) – Hanging Chain(72″,4mm) #XRE504EBGACHA4MM
- G. (1) – Fixture Loop
- H. (1) – Metal Cap
- I. (1) – Swivel
- J. (1) – Center Stem(12.87″,9.7mm) XRE506EBGA12.87IN
- K. (6) – Candle Sleeve(W0.87″,H2.76″) #XRE504EBGA2.76IN
