CRYSTORAMA 8867-AG Baxter Eight Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 8867-AG Baxter Eight Light Chandelier
Product Information
The product is a chandelier with a model number of 8867-AG. It requires 8-Candelabra Bulb with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. The product does not include the bulbs, but LED bulbs are recommended for extended use. The chandelier comes with mounting hardware, including a mounting plate, wire nut, outlet box screws, screw collar loop, collar ring, quick link, and lucite finial.
It is important to note that all electrical components need to be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. The product contains Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, go to www.P65Warnings.ca.gov
Product Usage Instructions
- Hook one end of a rod onto the frame and the other end onto the lower canopy. Repeat for the other rods.
- Decide the preferred hanging height and choose the chain needed.
- Fix the mounting plate to the ceiling and attach the canopy to the mounting plate.
- Install the shade onto the socket.
- Screw the lucite finial on the frame.
It is important to follow these instructions carefully to ensure safe and proper installation of the chandelier. If you have any questions or concerns, please consult a licensed electrician.
ASSEMBLY INSTRUCTION
MODEL #8867-AG
WARNING
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 8-Candelabra Bulb 40 Watts Recommended 60 Watts Max Bulb not included USE LED BULBS FOR EXTENDED USE This fixture is DRY rated
How to Install
-
Hook one end of a rod onto the frame and the other end onto the lower canopy.Repeat for the other rods.
-
Decide the preferred hanging height and choose the chain needed.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov -
Fix the mounting plate to the ceiling and attach the canopy to the mounting plate.
-
Install the shade onto the socket.
-
Screw the lucite finial on the frame.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
PART NUMBER
- Mounting Hardware
- (1) Mounting Plate
- (2) Wire Nut
- (2)Outlet Box Screws
- (1)Screw Collar Loop
- (1)Canopy;Ø5.5″x1″h;XMO8867AGCAN5.5IN D.(1)Collar Ring
- (2)Quick Link
- (1)Chain;72″LxØ5.0mmT;XMO8863AGCHA5MM G.(1)Lower canopy;XMO8867AGLCAN1.7IN
- (4)Rod;Ø0.5″x23″h;XMO8867AGROD23IN
- (8)Shade;Ø3″xØ5″x6″h;XMO8867AGSHA6IN
- (8)Socket
- (8)Lucite finial;XMO8867AGLUCFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>