CRYSTORAMA 1483-HB-CL-MWP Majestic Three Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
- CRYSTORAMA 1483-HB-CL-MWP Majestic Three Light Ceiling Mount
- Product Information
- Product Usage Instructions
- ASSEMBLY INSTRUCTION MODEL #1483-HB-CL-MWP
- How to Install
- Crystal Sets
- DETAILED ILLUSTRATION
- PART NUMBER MODEL #1483-HB-CL-MWP
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CRYSTORAMA 1483-HB-CL-MWP Majestic Three Light Ceiling Mount
Product Information
The model number for this product is #1483-HB-CL-MWP. It comes with 60 pieces of A crystal sets, 30 pieces of B crystal sets, and 1 piece of C crystal set. The fixture is dry-rated and requires 3 candelabra base bulbs, with a recommended wattage of 40W and a maximum wattage of 60W. LED bulbs are recommended for extended use. This product must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes.
Product Usage Instructions
- Do a complete inventory of all parts and components before starting installation.
- Safely attach the fixture to the outlet box.
- Install the bobeches and bulbs.
- Connect the power.
- When dressing the fixture, start with the pocket labeled (A).
- Apply crystal sets in alphabetical order, starting with A.
- For B crystal sets, use the 30-pin holes provided. For A crystal sets, use the 26 pin holes provided.
Note that this product contains lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65warnings.ca.gov.
ASSEMBLY INSTRUCTION MODEL #1483-HB-CL-MWP
WARNING
-
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
-
You will need 3 -Candelabra Base Bulb 40 Watts recommended 60Watts Max.
-
USE LED BULBS FOR EXTENDED USE
-
The fixture is dry-rated.
How to Install
- Do a complete inventory of all parts and components before you start installing.
- After safely attaching the fixture to the outlet box, install bobeches, and bulbs and proceed to connect the power.
- When you begin to dress the fixture, start with a pocket labeled(A)
- IMPORTANT: Apply crystal sets in alphabetical order.
Crystal Sets
- A. 100 Sets. (1)14mm + AS2-1.5″
- B. 30 Sets. (1)26mm + (1)24mm + (1)20mm + (1)18mm + (1)16mm
- C. 1 Piece. (2)14mm + AS8-40mm Ball
DETAILED ILLUSTRATION
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65warnings.ca.gov.
PART NUMBER MODEL #1483-HB-CL-MWP
- A. (2)-Wire Connector
- B. (1)-Mounting Bar
- C. (1)-Screw
- D. (1)-Hex Nut
- E. (1)-Ball Nut-XSN1483HBBANUT
- F. (1)-Canopy (W5″xH1.75″)
- XSN1483CAN5IN
- G. (1)-Vase
- H. (1)-Banding kit
- Decorative banding;60 pin holes
- Inside metal ring;30 pin holes
- I. (1)-Nut
- J. (1)-Thread
- K. (1)-Metal Tube(H3 5/8″)
- L. (1)-Nut
- M. (1)-2-Tier Basket;Ø6″,H2″ (30+26)+14 pin holes
- N. (1)-Finial-XSN1483HBFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>