WIRELESSDATASOLUTIONS MATSHTM Long Range RF Alarm Transmitter User Manual
- June 10, 2024
- WIRELESSDATASOLUTIONS
Table of Contents
WIRELESSDATASOLUTIONS MATSHTM Long Range RF Alarm Transmitter
Product Information
The MATSH Long Range RF Alarm Transmitter is a compact device that can interface with any alarm panel for full contact ID reporting. It is FCC, CE & EN approved and easy to install. It has 7 dry contact inputs and double frequencies for backup and extra security. This transmitter can be used in any configuration – combined with any alarm panel to report full data or as a stand-alone transmitter for panic.
Specifications
- Power Supply: AC 16V input (charger), DC input 10.5-14.5 VDC, 18mA standby
- Operating Temperature: N/A
- Storage Temperature: N/A
- Protocols: 32 bit words in LARS and LARSI protocol with BCH and PARITY. 64 bit words in LARSII protocol.
- RF Transmitter: Frequency Modulation Power Output Frequency Stability, Deviation (factory adjusted) Output Impedance, 50 BNC connector Antenna
- Ordering Information: Part Number MATSH,
Description Mini Alarm Transmitter, VHF 136-174MHz, 7 inputs,
Fitted with Base & Cover; MATSHDI Mini Alarm Transmitter, VHF 136-174MHz, 7 inputs, Fitted with Base & Cover & DI
Product Usage Instructions
To use the MATSH Long Range RF Alarm Transmitter, follow these steps:
- Connect the power supply to the transmitter using AC 16V input or DC input 10.5-14.5 VDC.
- Install the transmitter in your desired location. It is compact and easy to install.
- The transmitter has 7 dry contact inputs that can be used to interface with any alarm panel for full contact ID reporting.
- If you do not have an alarm panel, you can use the transmitter as a stand-alone device for panic reporting.
- The transmitter is field programmable via handheld or laptop, allowing for flexibility in its configuration.
- Ensure that the transmitter is FCC, CE & EN approved before use.
If you have any questions or concerns about the installation or usage of the
MATSH Long Range RF Alarm Transmitter, please contact
KP Electronic Systems Ltd at T: +972 4 9873066 or email
info@kpsystems.com.
Interface with any alarm panel for FULL CONTACT ID reporting | FCC, CE & EN Approved | Compact and easy to install | Field programmable via Hand-held or laptop | 7 dry contact inputs | Double frequencies for backup and extra security
The MATSH™ (VHF 136-174 MHz) units are a new generation of advanced, high- performance, RF alarm transmitters. Manufactured using the latest SMD technology. The MATSH™ unit delivers a winning combination of reliability and cost. Compact in form but powerful in performance, the MATSH™ family offers Full Contact-ID reporting over a long-range wireless link or long-range wireless links to the Central Station. Field programming allows installer to set up parameters such as ID, frequencies, periodic test, power output, etc. Flexibility allows using MATSH™ in any configuration – use it combined with any alarm panel to report full data, or as a stand-alone transmitter for panic button or guard control applications. Reliability was the major factor taken into consideration during development of the MATSH™, resulting in many built- in features such as double frequency reporting and unique error checking and data protection. The proof is in the product – almost two million MATSH™ units successfully deployed worldwide.
Product Specifications
GENERAL
- Power Supply AC 16V input (charger), DC input 10.5-14.5 VDC, 18mA standby
- Operating Temp. – 30˚C to 60˚C (-22˚F to 140˚F)
- Storage Temp. 40˚C to 70˚C (-40˚F to 158˚F)
RF TRANSMITTER
- Frequancy VHF: 136-174 MHz
- Modulation FM, FSK & PWM
- Power Output VHF: 5W
- Frequency Stability ±5 ppm at -30°C to 60°C (-22°F to 140°F)
- Deviation (factory adjusted) ±2.0 for 12.5 KHz bands
- Output Impedance 50Ω BNC connector Antenna
Adj. Ch. Selectivity
- 32 bit words in LARS and LARSI
- protocol with BCH and PARITY.
- 64 bit words in LARSII protocol.
Ordering Information
**
**
KP Electronic Systems Ltd | PO Box 42, Tefen Industrial Park Tefen, Israel 2495900 |T: +972 4 9873066 / F: +972 4 9873692 |info@kpsystems.com / www.kpsystems.com