Lenco TTA-5IN1 Record Cleaning kit User Manual
- June 5, 2024
- Lenco
Table of Contents
TTA-5IN1 Record Cleaning kit
User Manual
5 in 1 Record cleaning kit
What in the box: picture of the parts with numbers
- Velvet brush
- Vinyl record cleaning fluid
- Needle brush
- Velvet brush cleaner
General Instructions:
- Place your vinyl on the turntable and start rotation.
- Hold on to the Velvet Brush and spray the cleaning fluid on the velvet surface of the brush, two or three times.
- Holding the brush horizontal to the vinyl, gently place the brush over the vinyl as it spins. Ensure the velvet pad is the only part of the brush to touch your vinyl record. Repeat the process if necessary, making sure you clean the excess dust from the velvet brush before each pass through
- You can also clean your vinyl on a clean flat surface. Remember to always use a circular motion along the grooves.
- Use the small brush provided for cleaning the velvet surface.
Light Cleaning instructions:
- Turn the record player on and the let record rotates. Place DIY Velvet record brush on record and let the record make 2-3 rotations to remove any loose dust particles.
- Use the small brush provided for cleaning the velvet surface.
Note
Keep out of reach from children. Record cleaner can cause serious eye
irritation. If in Eyes, remove contact Jensen and rinse cautiously with water
for several minutes. If eye irritation persists get medical advice.
Service
For more information and helpdesk support, please visit
www.lenco.com
Lenco Benelux BV, Thermiekstraat la, 6361 HB Nuth, The Netherlands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>