C Cattleya CA2261-2W 1-Light Black Wall Sconce Instruction Manual
- June 12, 2024
- C Cattleya
Table of Contents
C Cattleya CA2261-2W 1-Light Black Wall Sconce
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE
NOTES:
- Before instal I ing, consult local electrical codes for wiring and grounding requirements.
- READ AND SAVE THESE INSTRUCTIONS.
INSTALLATION
-
Attach the mounting plate to the outlet box by using two mounting screws.
-
Pul I out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts, as fol low: –Connect the hot wire(usual ly black insulation)from the fixture to the black wire from the power source.
-
Connect the neutral wire(usual ly white insulation)from the fixture to the white wire from the power source. –Attach the fixture grounding wire(usual ly green insulation or bare wire)to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box. -
Attach the back plate to the mounting plate by inserting the screws.then secure it with two nuts. CAUTION: With silicone caulking compound, caulk completely around where the back plate meets with the wall surface to prevent water from seeping into the outlet box.
Turn on the power at fuse or circuit box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>