C Cattleya CA2206-3W 3 Light Vanity Light Instruction Manual
- October 30, 2023
- C Cattleya
Table of Contents
C Cattleya CA2206-3W 3 Light Vanity Light
Product Information
The product is a CA2206-3W fixture that requires assembly and installation. The fixture does not come with a bulb and will need to be purchased separately. The fixture has several components including decorative nuts, machine screws, glass, live wire, black wire, white wire, negative wire, ground wire, and GND.
Product Usage Instructions
- Before installing or servicing the fixture, ensure that power is shut off to avoid the risk of electrical shock.
- Attach the decorative nuts to the machine screws.
- Connect the live wire from the outlet box to the black wire of the fixture using a machine screw.
- Connect the negative wire from the outlet box to the white wire of the fixture using a machine screw.
- Connect the ground wire from the outlet box to the GND of the fixture.
- Attach the glass to the fixture.
- Install a bulb (not included) in the fixture.
- Turn on power to test the fixture.
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE
NOTES:
- Before instal I ing, consult local electrical codes for wiring and grounding requirements.
- READ AND SAVE THESE INSTRUCTIONS.
INSTALLATION INSTRUCTION
- Attach the mounting plate to the outlet box by using two mounting screws.
- Pul I out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts, as fol low:
- Connect the hot wire(usual ly black insulation)from the fixture to the black wire from the power source.
- Connect the neutral wire(usual ly white insulation)from the fixture to the white wire from the power source.
- Attach the fixture grounding wire(usual ly green insulation or bare wire)to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut. Carefully put the wires back into the outlet box.
- Attach the back plate to the mounting plate by inserting the screws.then secure it with two nuts.
CAUTION: With silicone caulking coq>ound, caulk coq>letely around where the back plate meets with the wall surface to prevent water from seeping into the outlet box.
Turn on the power at fuse or circuit box.
CA2206-3W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>