C Cattleya CA2206-W Light Black Wall Sconce with Clear Dome Glass Shade Instruction Manual
- October 30, 2023
- C Cattleya
Table of Contents
CA2206-W Light Black Wall Sconce with Clear Dome Glass Shade Instruction Manual
ASSEMBLY AND INSTALLATION INSTRUCTIONS
CA2206-W
WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER
WHILE INSTALLING OR SERVICING THIS FIXTURE
NOTES:
-
Before instal ling, consult local electrical codes for wiring and grounding requirements.
-
READ AND SAVE THESE INSTRUCTIONS.
-
Attach the mounting plate to the outlet box by using two mounting screws.
-
Pul I out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts, as fol low:
–Connect the hot wire (usually black insulation)from the fixture to the black wire from the power source.
–Connect the neutral wire(usually white insulation)from the fixture to the white wire from the power source.
–Attach the fixture grounding wire(usually green insulation or bare wire)to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box. -
Attach the back plate to the mounting plate by inserting the screws, then secure it with two nuts.
CAUTION: With icon caulking compound, caulk completely around where the back plate meets with the wal I surface to prevent water from seeping into the outlet box.
Turn on the power at fuse or circuit box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>