C Cattleya CA2252-FM 2 Light Brass Flush Mount with Clear Tempered Glass Instruction Manual

: October 30, 2023
: C Cattleya

Table of Contents

C Cattleya CA2252-FM 2 Light Brass Flush Mount with Clear Tempered Glass
Product Information
Product Usage Instructions
Mounting
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

C Cattleya CA2252-FM 2 Light Brass Flush Mount with Clear Tempered Glass

CA2252-FM-2-Light-Brass-Flush-Mount-with-Clear-Tempered-Glass-
product

Product Information

CA2252-FM

The CA2252-FM is a decorative light fixture that requires assembly and installation. The fixture comes with a white wire, black wire, and ground wire. A decorative nut is included, but the bulb is not included.

WARNING: To avoid the risk of electrical shock, be sure to shut off power while installing or servicing this fixture.

Product Usage Instructions

Turn off the power supply to the light fixture at the circuit breaker or fuse box.
Remove any existing light fixture and disconnect the wires.
Attach the fixture’s mounting bracket to the outlet box using machine screws (not included).
Connect the white wire from the fixture to the white wire from the outlet box using a wire connector.
Connect the black wire from the fixture to the black (live) wire from the outlet box using a wire connector.
Connect the ground wire from the fixture to the ground (GND) wire from the outlet box using a wire connector.
Attach the decorative nut to the fixture, ensuring that it is securely in place.
Insert a compatible bulb into the fixture according to the manufacturer’s instructions.
Turn on the power supply to the light fixture at the circuit breaker or fuse box.
Test the light fixture to ensure it is working properly.

WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE
NOTES:

Before installing. consult local electrical codes for wiring and grounding requirements.
READ AND SAVE THESE INSTRUCTIONS.

Mounting

CA2252-FM-2-Light-Brass-Flush-Mount-with-Clear-Tempered-Glass-
fig 1

Attach the mounting plate to the outlet box by using two mounting screws.
Pull out the wires and grounding wire from the outlet box. Make wire connections using the wire nuts, as follow:
- Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
- Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
- Attach the fixture grounding wire (usually green insulation or bare wire)to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with the wire nut.
  Carefully put the wires back into the outlet box.
Attach the back plate to the mounting plate by inserting the screws, then secure it with two nuts.
CAUTION: With silicone caulking compound, caulk completely around where the back plate meets with the wall surface to prevent water from seeping into the outlet box.

Turn on the power at fuse or circuit box.

Documents / Resources

| C Cattleya CA2252-FM 2 Light Brass Flush Mount with Clear Tempered Glass [pdf] Instruction Manual
CA2252-FM 2 Light Brass Flush Mount with Clear Tempered Glass, CA2252-FM, 2 Light Brass Flush Mount with Clear Tempered Glass, Mount with Clear Tempered Glass, Clear Tempered Glass, Tempered Glass
---|---