C Cattleya HCA2317-FM 3 Light Black and Gold Drum Cage Semi Flush Mount Light Instructions
- October 30, 2023
- C Cattleya
Table of Contents
INSTALLATION INSTRUCTIONS
CEILING FIXTURE
120VAC/60Hz
READ AND FOLLOW SAFETY INFORMATON
Turn off the main power at the circuit breaker before installing and servicing
the fixture to prevent possible injury from electric shock.
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections, obtain the services of a qualified electrician.
INSTALLATION & ASSEMBLEY
-
Unscrew the mounting screws(5)from the crossbar assembly(2),remove the crossbar assembly(2)from the canopy(6),and keep the mounting screws (5) for later use.
-
Secure the crossbar assembly(2) to the outlet box(1) with outlet box screws(4).
Tighten until snug. -
Connect the fixture body (7) to canopy (6).
-
Connect the white wires from the fixture to the white wire of the supply circuit.
Connect the black wires from the fixture to the black wire of the supply circuit.
Wrap the bare copper grounding wire from the fixture around the green screw on the crossbar assembly(2), then connect it to the grounding conductor of the supply circuit.Use U.L./C.S.A. listed wire connectors (3) suitable for the size, type and number of conductors. Secure the wire connectors (3) with U.L./C.S.A. listed electrical tape. -
Line up the holes on the canopy of the canopy(6) and the mounting holes on the crossbar assembly(2).Secure with the mounting screws(5).Tighten until snug.
-
Attach one end of the iron Pipe (9) to the fixture body (7) with the fixture Body Screw (8).The Ring (10) uses the fixture body Screw (8) to fix to the other end of the Iron Pipe (9)
-
Finally, install the bulb.
-
After installation, turn on the switch.
-
OUTLET BOX (NOT INCLUDED)
-
CROSSBAR ASSEMBLY
-
WIRE CONNECTOR
-
OUTLET BOX SCREW
-
MOUNTING SCREW
-
CANOPY
-
FIXTURE BODY
-
FIXTURE BODY SCREW
-
IRON PIPE
-
RING