CRYSTORAMA 513-SA-CEILING Three Light Ceiling Mount

Product Information

The product is a ceiling fixture with model number 513-SA_CEILING. It can be used for hanging or ceiling mount purposes. The fixture requires 3 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. LED bulbs are suggested for extended use. The fixture is dry rated, meaning it is suitable for indoor use only.

Product Usage Instructions

1. Feed wires through stem/swivel/loop.
2. Attach the stem assembly onto the light cluster.
3. Attach the swivel/loop assembly onto the stem.
4. Put the top metal band ring over the top of the white cloth shade.
5. Take one end of the decorative chain and hang it onto the hook on the loop assembly. Hang the other end to the hook inside the shade. Repeat for the other two decorative chains.
6. Place the candle sleeve onto the socket, and insert recommended bulb (not included).
7. Hang the metal ball A onto the bottom of the fixture.
8. If installing as a ceiling mount, remove the loop from the loop assembly. Place the canopy over the nipple and secure it with a hexnut.

Note: The package includes all necessary parts for installation, including mounting hardware, canopy, decorative metal leaves, ball nut, fixture loop, quick link, hanging chain, center stem, decorative chains, white cloth shade, candle sleeve, and bottom metal band ring.

ASSEMBLY INSTRUCTION MODEL

513-SA CEILING

All electrical components must be installed by a licensed electrician in accordance with the National
Electric Code and the appropriate local electrical codes.

You will need 3 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DRY RATED

DIMENSION

FOR HANGING

How to install

1. Feed wires through stem/swivel/ loop.
2. Attach the stem assembly onto the light cluster.
3. Attach the swivel/loop assembly onto the stem.
4. Put the top metal band ring over the top of the white cloth shade.
5. Take one end of the decorative chain and hang it onto the hook on the loop assembly. Hang the other end to the hook inside the shade. Repeat for the other two decorative chains.
6. Place the candle sleeve onto the socket, and insert recommended bulb (not included).
7. Hang the metal ball “A” onto the bottom of the fixture.
8. If installing as a ceiling mount, remove the loop from the loop assembly
   Place the canopy over the nipple and secure it with a hexnut.

FOR CEILING MOUNT

Hangings

A. 1 Set.
(1)10mm + (1)40mm
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.

Part Number

• A. Mounting Hardware
• B. Canopy(W5″, H0.75″) #XRE513SACANSIN
• C. Decorative Metal Leaves1
• D. Decorative Metal Leaves2
• E. Ball Nut #XRE513SABANUT
• F. Fixture Loop #XRE513SALOOP
• G. Quick Link
• H. Hanging Chain(72″,3.4mm) #XRE513SACHA3.4MM
• I. Loop Assembly
• J. Center Stem(11.06″,9.7mm) #XRE513SASTEM
• K. Decorative Chains(each9″ 3mm) #XRE513SADECHA3MM
• L. Top Metal Band Ring
• M. White Cloth Shade(W13.78″, H6.5″) #XRE513SASHA14IN
• N. Candle Sleeve(W0.87″,H1.97″) #XRE511SACDLZIN
• O. Bottom Metal Band Ring

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>